The non-aerosol bottle of ACDelco Cooling Coil Coating is a refill for cooling coil coating originally sold with the ACDelco Cooling Coil Coating Applicator Kit (Tool). It improves air conditioning efficiency by covering your air conditioning evaporator with a thin, acrylic coating that helps surfaces to shed odor-causing moisture quickly. ⚠
| Application Method | Gun |
| FAQ - Answer 1 | Yes, the 4 oz. bottle has a shelf life of 5 years. |
| FAQ - Answer 2 | No, ammonia is incorporated into the product for emulsification purposes. When ACDelco Air Conditioning Cooling Coil Coating is being installed, you may smell the ammonia. However, once the coating has properly dried and cured, it gives off no odor or fragrance. |
| FAQ - Answer 3 | Yes, though the water and ammonia used in ACDelco Cooling Coil Coating evaporates faster when heat is used in the drying process. However, even without heat, the product will dry and cure. In ambient temperatures of 70 degrees Fahrenheit/20 degrees Celsius and low humidity (less than 50%) the product can be cured in an airstream in approximately three hours. |
| FAQ - Answer 4 | Yes, it is recommended to use the product on as clean a surface as possible. However, advance cleaning is only necessary if there is substantial contamination visible on the evaporator surface. |
| FAQ - Answer 5 | No, you MUST dry the evaporator at least 20-30 minutes before you apply Cooling Coil Coating. Similar to paint, the coating cannot adhere to wet surfaces. It must be applied only to dry surfaces. |
| FAQ - Answer 6 | The liquid system, when applied correctly using the applicator kit, has been found to be much more effective in eliminating A/C system odors when compared to the aerosol can method. |
| FAQ - Question 1 | Does ACDelco Cooling Coil Coating have a shelf life? |
| FAQ - Question 2 | Does ACDelco Cooling Coil Coating contain any perfumes or fragrances? |
| FAQ - Question 3 | Will ACDelco Cooling Coil Coating cure properly in unheated air? |
| FAQ - Question 4 | Is it necessary to clean the evaporator before applying ACDelco Cooling Coil Coating? |
| FAQ - Question 5 | Will ACDelco Cooling Coil Coating still be effective if the evaporator is not dry? |
| FAQ - Question 6 | Is the aerosol can system as effective as the more expensive liquid supplied with the kit? |
| Good Maintenance Practices - Section 1 - Bullet 1 | Re-coat your cooling coils as often as directed to protect and prevent unwanted air conditioning system related smells. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Ensure that the air conditioning system's evaporator is dry prior to cooling coil coating application. ACDelco Cooling Coil Coating will not adhere properly to wet surfaces. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Allow ACDelco Cooling Coil Coating to dry for a set period of time, followed by a set time exposed to heat. This will properly cure and seal the coating to the air conditioning system. For more specific information, see the installation instructions. Always follow the installation instructions prior to application to ensure that ACDelco Cooling Coil Coating in properly applied to achieve maximum performance levels. |
| Height (in) | 4.25 |
| Hypoallergenic | No |
| Informational Chart 1 | PL10_IC_AC_CoolingCoilCoating.jpg |
| Length (in) | 5.75 |
| Programming Required | No |
| Scented | Yes |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | An unpleasant smell originating from your air conditioning system could be a sign of bacteria, mold, or mildew growth on the cooling coils. To prevent or alleviate the smell, use ACDelco Cooling Coil Coating as directed. |
| Stains | Yes |
| Weight (lb) | 0.31 |
| Width (in) | 2.25 |
ACDelco
ACDelco GM Original Equipment A/C Evaporator Cores are heat exchangers and are located in the HVAC housing, where they cool and dehumidify the cabin air. Refrigerant is metered into the evaporator by...
ACDelco
ACDelco GM Original Equipment A/C Evaporator Cores are heat exchangers and are located in the HVAC housing, where they cool and dehumidify the cabin air. Refrigerant is metered into the evaporator by...
ACDelco
ACDelco Professional A/C Evaporator Core is a high quality aftermarket replacement component for one or more of the following vehicle systems: hvac. This premium aftermarket core is manufactured to...
ACDelco
ACDelco GM Original Equipment A/C Evaporator Cores are heat exchangers and are located in the HVAC housing, where they cool and dehumidify the cabin air. Refrigerant is metered into the evaporator by...
ACDelco
ACDelco GM Original Equipment A/C Evaporator Cores are heat exchangers and are located in the HVAC housing, where they cool and dehumidify the cabin air. Refrigerant is metered into the evaporator by...
