×
close
click to zoom in

ACDelco 14D632MH | Front Disc Brake Pad Set

(No reviews yet) Write a Review
$38.99
Part Number
ACD14D632MH
UPC:
808709831389
Condition:
New
5 customers are viewing this product

ACDelco Silver (Advantage) Semi-Metallic Disc Brake Pads are a quality, high value alternative for General Motors vehicles as well as most makes and models and are backed by General Motors. These disc brake pads are formulated with steel strands to provide strength and conduct heat away from the rotor's surface while offering quality braking power. Also, hardware clip kits are included where applicable. ACDelco Advantage Semi-Metallic Disc Brake Pads are available for all makes and models. ACDelco Silver (Advantage) parts are a good choice for many vehicles on the road today. Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Basic shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
  • Ceramic, Semi-Metallic, and Organic formulas provide safety and reliability for a range of vehicle applications
  • Economical value with dependable quality
  • For General Motors vehicles as well as most makes and models
  • Ford
  • No curing or machining required, ready to be installed right out of the box
  • Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage

SPECIFICS:

Abutment Clips IncludedYes
Backing MaterialSteel
Chamfered EdgesYes
FAQ - Answer 1No, but it is a good idea to inspect them for wear-out, cracking, leaking, etc.
FAQ - Answer 2Yes, ACDelco also offers GM OE Brake Pads and Professional Brake Pads.
FAQ - Answer 3No, but it is a good idea to inspect your brake pads at each tire rotation.
FAQ - Question 1Do I have to replace all my brake parts when replacing my brake pads?
FAQ - Question 2Does ACDelco offer other grades of brake pads?
FAQ - Question 3Do I have to replace my brake pads after a certain amount of time?
Friction Material AttachmentBonded
Friction Material CompositionCeramic
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Grade TypeRegular
Height (in)2.5
Length (in)9.5
Mounting Hardware IncludedYes
Pad Wear Sensor IncludedNo
Pad Wear Sensor TypeMechanical
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 4Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bullet 5Vehicle pulls to the left or right when brakes are applied.
SlottedYes
Universal Or Specific FitSpecific
Weight (lb)5.3
Width (in)6.3

OE Pad Material is Semi-Metallic

APPLICATIONS:

  • 2003-2003 Ford E-150 Club Wagon - Position: Front
  • 1994-1996 Ford Bronco - Position: Front
  • 1994-2002 Ford E-150 Econoline Club Wagon - Position: Front
  • 2003-2003 Ford E-150 - Position: Front
  • 1994-1996 Ford F-150 - Position: Front
  • 1994-2002 Ford E-150 Econoline - Position: Front

Product type:
Aftermarket
Brand Description:
Brake Pad Set
Product Description:
Semi-Metallic Front Disc Brake Pad
Backing Material:
Steel
Pad Wear Sensor Included:
No
Friction Material Attachment:
Bonded
Grade Type:
Regular
Friction Material Composition:
Ceramic
Universal Or Specific Fit:
Specific
Chamfered Edges:
Yes
Mounting Hardware Included:
Yes
Slotted:
Yes
Abutment Clips Included:
Yes
Pad Wear Sensor Type:
Mechanical
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Basic shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
Features & Benefits - Bullet 4:
Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage
Features & Benefits - Bullet 3:
No curing or machining required, ready to be installed right out of the box
Features & Benefits - Bullet 1:
Ceramic, Semi-Metallic, and Organic formulas provide safety and reliability for a range of vehicle applications
Weight (lb) (Pound):
5.3
Height (in) (Inch):
2.5
Life Cycle Status:
Announced
Width (in) (Inch):
6.3
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Length (in) (Inch):
9.5
Item Level GTIN:
00808709831389
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
FAQ - Answer 2:
Yes, ACDelco also offers GM OE Brake Pads and Professional Brake Pads.
FAQ - Question 3:
Do I have to replace my brake pads after a certain amount of time?
FAQ - Question 1:
Do I have to replace all my brake parts when replacing my brake pads?
Features & Benefits - Bullet 6:
For General Motors vehicles as well as most makes and models
FAQ - Question 2:
Does ACDelco offer other grades of brake pads?
Features & Benefits - Bullet 5:
Economical value with dependable quality
FAQ - Answer 1:
No, but it is a good idea to inspect them for wear-out, cracking, leaking, etc.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
FAQ - Answer 3:
No, but it is a good idea to inspect your brake pads at each tire rotation.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Country of Origin:
Mexico
Weight - Each (Gross Pounds):
05.30
Weight - Case (Gross Pounds):
15.90
Height - Each (Inch):
02.50
Height - Case (Inch):
06.40
Length - Each (Inch):
09.50
Length - Case (Inch):
09.50
Width - Each (Inch):
06.30
Width - Case (Inch):
08.00



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top