×
close
click to zoom in

GM Genuine Parts 171-434 | Rear Drum Brake Shoe

(No reviews yet) Write a Review
$89.99
Part Number
ACD171-434
UPC:
707773254530
Condition:
New
5 customers are viewing this product

ACDelco GM Original Equipment Drum Brake Shoes are curved friction material used in drum brakes. The friction-enhancing material is bonded and/or riveted to a steel backing. These original equipment brake shoes are manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.govRear Drum Brake Shoe Set

BRAND: ACDelco

FEATURES:

  • Abs Components;Brake;Brake Caliper;Brake Caliper Lubricant;brake care;Brake Fluid;Brake Pad;Brake Parts;Brake Rotor;Brake Shoe;brakes care;Caliper;Drums;Durastop Brake Pads;Durastop Brake Parts;Durastop Ceramic Brake Pads;Low Voc Brake Parts Cleaner 15oz;Low Voc Brake Parts Cleaner 16oz;luxury hybrid brake pads;oem Brakes;Pads And Shoes;Rotor;Silicone Brake Lubricant
  • Equipped with GM OE fit; no retrofitting is required
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Manufactured to GM OE specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE
  • Rear Brake Shoe Set
  • Rust-preventive coating to help protect against corrosion

SPECIFICS:

ACD_RemanDesNo
Good Maintenance Practices - S1 B1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - S1 B2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - S1 B3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - S1 B4Check the thickness of your brake pads.
Good Maintenance Practices - S1 HThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - S2 B1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - S2 B2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - S2 B3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - S2 B4Parking brake adjustments (as needed).
Good Maintenance Practices - S2 HThe following should be conducted by a qualified technician:
Marketing Statement - Product LineGet the GM quality you know and trust with ACDelco GM Original Equipment Brakes. Stay with the parts brand your GM vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Brakes are engineered for virtually every make and model of GM car, light duty truck, and sport utility vehicle.
Mkt_State_Warranty_CA36 Months/60,000 KM (Parts Only). Please see ACDelcocanada.com for more details.
Mkt_State_Warranty_US24 Month / Unlimited Mile Limited Warranty (Parts Only). Please see ACDelco.com for more details.
PAdb Update Date2015-08-25
Signs of Wear & Troubleshooting - S1 B1Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - S1 B2Squealing or grinding noises.
Signs of Wear & Troubleshooting - S1 B3Low brake pedal height.
Signs of Wear & Troubleshooting - S1 B4Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - S1 HBrake shoe signs of wear include:
Vintage_Part_IndicatorN

DOWNLOADS:

APPLICATIONS:

  • 1995-1997 Chevrolet S10 - Position: Rear
    • EXCEPT EUROPEAN PROVISIONS(VD1) EXC CYL PUSH ROD, ASBESTOS FREE
  • 1982-1983 Oldsmobile Cutlass Cruiser - Position: Rear
    • EXC CYL PUSH ROD, ASBESTOS FREE
  • 1982-1982 Chevrolet El Camino - Position: Rear
    • EXC CYL PUSH ROD, ASBESTOS FREE
  • 1982-1983 Buick Regal - Position: Rear
    • EXC CYL PUSH ROD, ASBESTOS FREE
  • 1995-1997 GMC Sonoma - Position: Rear
    • EXCEPT EUROPEAN PROVISIONS(VD1) EXC CYL PUSH ROD, ASBESTOS FREE
  • 1982-1983 Oldsmobile Cutlass Supreme - Position: Rear
    • EXC CYL PUSH ROD, ASBESTOS FREE
  • 1997-1998 Chevrolet S10 - Position: Rear
    • W/O CYL PUSH ROD)(ASBESTOS FREE
  • 2001-2002 GMC Safari - Position: Rear
    • 3.42R(GU6), 3.73R(GT4), 7.625 RING GEAR SAGINAW-AMERICAN EXC CYL PUSH ROD, ASBESTOS FREE
  • 1982-1983 Pontiac Grand LeMans - Position: Rear
    • EXC CYL PUSH ROD, ASBESTOS FREE
  • 1985-1989 Chevrolet Astro - Position: Rear
    • 7.625 RING GEAR SAGINAW-AMERICAN 9.5 X 2 BRKS)(INCLS SHOE & LNG ASM, SOLD AS ASM, EXC CYL PUSH ROD, ASBESTOS FREE
  • 1988-1994 Chevrolet S10 - Position: Rear
    • EXC CYL PUSH ROD, ASBESTOS FREE
  • 1991-1994 Oldsmobile Bravada - Position: Rear
    • EXC CYL PUSH ROD, ASBESTOS FREE
  • 2003-2003 Chevrolet S10 - Position: Rear
    • EXC CYL PUSH ROD, ASBESTOS FREE
  • 1988-1994 Chevrolet S10 Blazer - Position: Rear
    • EXC CYL PUSH ROD, ASBESTOS FREE
  • 2002-2002 GMC Sonoma - Position: Rear
    • 3.42R(GU6), POSITRACTION L/SLIP R/AXL(G80), SPORT CHAS PKG(ZQ8) EXC CYL PUSH ROD, ASBESTOS FREE
  • 1982-1983 Pontiac Bonneville - Position: Rear
    • EXC CYL PUSH ROD, ASBESTOS FREE
  • 2003-2003 GMC Sonoma - Position: Rear
    • EXC CYL PUSH ROD, ASBESTOS FREE
  • 1982-1983 Chevrolet Monte Carlo - Position: Rear
    • EXC CYL PUSH ROD, ASBESTOS FREE
  • 1988-1991 GMC S15 Jimmy - Position: Rear
    • EXC CYL PUSH ROD, ASBESTOS FREE
  • 1992-1994 GMC Jimmy - Position: Rear
    • EXC CYL PUSH ROD, ASBESTOS FREE
  • 2002-2002 Chevrolet S10 - Position: Rear
    • 4.10R(GT5), CHAS PKG(Z83), CHAS PKG(Z85) EXC CYL PUSH ROD, ASBESTOS FREE
  • 2002-2002 Chevrolet S10 - Position: Rear
    • 3.42R(GU6), POSITRACTION L/SLIP R/AXL(G80), SPORT CHAS PKG(ZQ8) EXC CYL PUSH ROD, ASBESTOS FREE
  • 1991-1994 GMC Sonoma - Position: Rear
    • EXC CYL PUSH ROD, ASBESTOS FREE
  • 1993-1995 Pontiac Firebird - Position: Rear
    • Cast Iron EXC CYL PUSH ROD, ASBESTOS FREE
  • 1993-1995 Chevrolet Camaro - Position: Rear
    • Cast Iron EXC CYL PUSH ROD, ASBESTOS FREE
  • 1995-1997 Chevrolet Blazer - Position: Rear
    • EXCEPT EUROPEAN PROVISIONS(VD1) EXC CYL PUSH ROD, ASBESTOS FREE
  • 1990-2000 GMC Safari - Position: Rear
    • 3.23R(GU5), 3.42R(GU6), 3.73R(GT4), 7.625 RING GEAR SAGINAW-AMERICAN EXC CYL PUSH ROD, ASBESTOS FREE
  • 2002-2002 GMC Sonoma - Position: Rear
    • 4.10R(GT5), CHAS PKG(Z83), CHAS PKG(Z85) EXC CYL PUSH ROD, ASBESTOS FREE
  • 1982-1983 Chevrolet Malibu - Position: Rear
    • EXC CYL PUSH ROD, ASBESTOS FREE
  • 1991-1991 GMC Syclone - Position: Rear
    • EXC CYL PUSH ROD, ASBESTOS FREE
  • 1982-1983 Pontiac Grand Prix - Position: Rear
    • EXC CYL PUSH ROD, ASBESTOS FREE
  • 1995-1997 GMC Jimmy - Position: Rear
    • EXCEPT EUROPEAN PROVISIONS(VD1) EXC CYL PUSH ROD, ASBESTOS FREE
  • 1996-1997 Pontiac Firebird - Position: Rear
    • 3.08R(GU4), 3.23R(GU5), 3.42R(GU6), Cast Iron EXCEPT POSITRACTION L/SLIP R/AXL(G80), ELEC TRACTION CONT(NW9) EXC CYL PUSH ROD, ASBESTOS FREE
  • 1982-1983 Oldsmobile Cutlass Calais - Position: Rear
    • EXC CYL PUSH ROD, ASBESTOS FREE
  • 1992-1993 GMC Typhoon - Position: Rear
    • EXC CYL PUSH ROD, ASBESTOS FREE
  • 1996-1997 Chevrolet Camaro - Position: Rear
    • 3.08R(GU4), 3.23R(GU5), 3.42R(GU6), Cast Iron EXCEPT POSITRACTION L/SLIP R/AXL(G80), ELEC TRACTION CONT(NW9) EXC CYL PUSH ROD, ASBESTOS FREE
  • 1988-1990 GMC S15 - Position: Rear
    • EXC CYL PUSH ROD, ASBESTOS FREE
  • 1990-2000 Chevrolet Astro - Position: Rear
    • 3.23R(GU5), 3.42R(GU6), 3.73R(GT4), 7.625 RING GEAR SAGINAW-AMERICAN EXC CYL PUSH ROD, ASBESTOS FREE
  • 1985-1989 GMC Safari - Position: Rear
    • 7.625 RING GEAR SAGINAW-AMERICAN 9.5 X 2 BRKS)(INCLS SHOE & LNG ASM, SOLD AS ASM, EXC CYL PUSH ROD, ASBESTOS FREE
  • 2001-2002 Chevrolet Astro - Position: Rear
    • 3.42R(GU6), 3.73R(GT4), 7.625 RING GEAR SAGINAW-AMERICAN EXC CYL PUSH ROD, ASBESTOS FREE
  • 1996-1997 Oldsmobile Bravada - Position: Rear
    • EXCEPT EUROPEAN PROVISIONS(VD1) EXC CYL PUSH ROD, ASBESTOS FREE

Product type:
Aftermarket
Brand Description:
Rear Brake Shoe Set
Product Description:
Rear Drum Brake Shoe Set
Friction Material Attachment:
Riveted
Mounting Hardware Included:
No
Programming Required:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Direct fit; no retrofitting is required
Features & Benefits - Bullet 4:
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
Features & Benefits - Bullet 3:
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Features & Benefits - Bullet 1:
Rust-preventive coating to help protect against corrosion
Weight (lb) (Pound):
4.5
Height (in) (Inch):
4
Width (in) (Inch):
6.7
Length (in) (Inch):
11.7
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Low brake pedal height.
Features & Benefits - Bullet 6:
GM regularly updates production and service part designs to integrate new materials and technologies
Features & Benefits - Bullet 5:
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Life Cycle Status:
Announced
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Item Level GTIN:
00707773254530
Good Maintenance Practices - Section 1 - Bullet 5:
The following should be conducted by a qualified technician:
Good Maintenance Practices - Section 1 - Bullet 6:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 1 - Bullet 9:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 1 - Bullet 10:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 1 - Bullet 11:
Parking brake adjustments (as needed).
Country of Origin:
Mexico
Weight - Each (Gross Pounds):
04.50
Height - Each (Inch):
03.90
Length - Each (Inch):
12.40
Width - Each (Inch):
07.00



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top