×
close
click to zoom in

GM Genuine Parts 171-676 | Rear Drum Brake Shoe

(No reviews yet) Write a Review
$98.09
Part Number
ACD171-676
UPC:
707773284186
Condition:
New
5 customers are viewing this product

GM Genuine Parts Drum Brake Shoes are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These drum brake shoes are curved friction material used in drum brakes. The friction-enhancing material is bonded and/or riveted to a steel backing. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: GM Genuine Parts

FEATURES:

  • brake-pad;-brake-shoe;rotors;drum;brake-job;front-brake;rear-brake;cylider;hydraluic;dot-3;dot-4;front-brakes;rear-brakes;brake-set;breaks
  • Chevrolet;Oldsmobile;Pontiac
  • Direct fit; no retrofitting is required
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM regularly updates production and service part designs to integrate new materials and technologies
  • Rear Brake Shoe Set
  • Rear Drum Brake Shoe Set
  • Rust-preventive coating to help protect against corrosion
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)

SPECIFICS:

Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 10Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 1 - Bullet 11Parking brake adjustments (as needed).
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Bullet 5The following should be conducted by a qualified technician:
Good Maintenance Practices - Section 1 - Bullet 6Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 1 - Bullet 9Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Height (in)4
Length (in)11.75
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Low brake pedal height.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Vehicle pulls to the left or right when brakes are applied.
Weight (lb)4.52
Width (in)6.75

Product type:
Aftermarket
Brand Description:
Rear Brake Shoe Set
Product Description:
Rear Drum Brake Shoe Set
Friction Material Attachment:
Riveted
Mounting Hardware Included:
No
Programming Required:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Direct fit; no retrofitting is required
Features & Benefits - Bullet 4:
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
Features & Benefits - Bullet 3:
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Features & Benefits - Bullet 1:
Rust-preventive coating to help protect against corrosion
Weight (lb) (Pound):
4.52
Height (in) (Inch):
4
Width (in) (Inch):
6.75
Length (in) (Inch):
11.75
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Low brake pedal height.
Features & Benefits - Bullet 6:
GM regularly updates production and service part designs to integrate new materials and technologies
Features & Benefits - Bullet 5:
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Life Cycle Status:
Discontinued
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Life Cycle Status Description:
Discontinued - Part is being removed from the product line.
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Item Level GTIN:
00707773284186
Good Maintenance Practices - Section 1 - Bullet 5:
The following should be conducted by a qualified technician:
Good Maintenance Practices - Section 1 - Bullet 6:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 1 - Bullet 9:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 1 - Bullet 10:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 1 - Bullet 11:
Parking brake adjustments (as needed).
Country of Origin:
China
Weight - Each (Gross Pounds):
04.52
Height - Each (Inch):
03.90
Length - Each (Inch):
12.40
Width - Each (Inch):
07.00



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top