×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
ACDelco 174-1163 | Brake Master Cylinder
click to zoom in

ACDelco 174-1163 | Brake Master Cylinder

(No reviews yet) Write a Review
$96.99
Part Number
ACD174-1163
UPC:
707773670712
Condition:
New
5 customers are viewing this product

video gallery

Description

ACDelco GM Original Equipment Brake Master Cylinder is a hydraulic pump mounted to the brake booster and contains a reservoir that holds brake fluid. This original equipment brake master cylinder has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Chevrolet|Pontiac|Saturn
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Manufactured with GM Original Equipment specification for fit, form, and function
  • Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality
  • Offering the quality, reliability, and durability of GM OE
  • Pressure tested to ensure safe and confident braking

SPECIFICS:

Bleeder Hoses IncludedNo
Brake Booster IncludedNo
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (in)8.38
Length (in)11.12
Master Cylinder Cap IncludedYes
Master Cylinder MaterialAluminum,Steel,Plastic
Mounting Bracket IncludedYes
Mounting Hole Quantity2
Port Quantity2
Programming RequiredNo
Pushrod IncludedNo
Reservoir IncludedYes
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Brake warning light is on.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Fluid spots beneath the car, indicating there may be a leak within the cylinder.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bullet 4A low or sinking brake pedal.
Signs of Wear & Troubleshooting - Section 1 - HeaderBrake cylinder signs of wear include:
Weight (lb)2.01
Width (in)10.38

2nd Design FOR VEHICLES WITH M14 PORT, USE W/PIPE 25924454 WITH (1) M14 & (1) M13 INVERTED FLARE NUTS)(FOR 1ST DES SEE 25872283

APPLICATIONS:

  • 2008-2010 Pontiac G6
  • 2008-2009 Saturn Aura
  • 2008-2012 Chevrolet Malibu

Attributes
Product type:
Aftermarket
Brand Description:
Brake Master Cylinder
Product Description:
Brake Master Cylinder Assembly
Programming Required:
No
Mounting Bracket Included:
Yes
Mounting Hole Quantity:
2
Port Quantity:
2
Reservoir Included:
Yes
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality
Features & Benefits - Bullet 4:
Offering the quality, reliability, and durability of GM OE
Features & Benefits - Bullet 3:
GM-recommended replacement part for your GM vehicle's original factory component
Features & Benefits - Bullet 1:
Pressure tested to ensure safe and confident braking
Weight (lb) (Pound):
2.01
Height (in) (Inch):
8.38
Width (in) (Inch):
10.38
Length (in) (Inch):
11.12
Signs of Wear & Troubleshooting - Section 1 - Bull:
Fluid spots beneath the car, indicating there may be a leak within the cylinder.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake warning light is on.
Signs of Wear & Troubleshooting - Section 1 - Bull:
A low or sinking brake pedal.
Life Cycle Status:
Announced
Signs of Wear & Troubleshooting - Section 1 - Head:
Brake cylinder signs of wear include:
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Features & Benefits - Bullet 5:
Manufactured with GM Original Equipment specification for fit, form, and function
Item Level GTIN:
00707773670712
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Pushrod Included:
No
Master Cylinder Cap Included:
Yes
Master Cylinder Material:
Aluminum,Steel,Plastic
Brake Booster Included:
No
Bleeder Hoses Included:
No
Primary Outlet Thread Diameter (Inch):
0.551
Master Cylinder Bore Diameter (Inch):
0.9375
Secondary Outlet Thread Diameter (Inch):
0.551
Primary Outlet Thread Diameter (Millimeter):
14
Secondary Outlet Thread Diameter (Millimeter):
14
Master Cylinder Bore Diameter (Millimeter):
23.8125
Country of Origin:
Mexico
Weight - Each (Gross Pounds):
02.01
Height - Each (Inch):
08.38
Length - Each (Inch):
11.12
Width - Each (Inch):
10.38



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top