ACDelco 174-1230 | Brake Master Cylinder
5 customers are viewing this product
ACDelco GM Original Equipment Brake Master Cylinder is a hydraulic pump mounted to the brake booster and contains a reservoir that holds brake fluid. This original equipment brake master cylinder has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ?
BRAND: ACDelco
FEATURES:
- Cadillac
- GM-recommended replacement part for your GM vehicle's original factory component
- Manufactured with GM Original Equipment specification for fit, form, and function
- Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality
- Offering the quality, reliability, and durability of GM OE
- Pressure tested to ensure safe and confident braking
SPECIFICS:
Bleeder Hoses Included | No |
Brake Booster Included | No |
Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems. |
Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
Height (in) | 6.5 |
Length (in) | 10.75 |
Master Cylinder Cap Included | Yes |
Master Cylinder Material | Aluminum,Steel,Plastic |
Mounting Bracket Included | Yes |
Mounting Hole Quantity | 2 |
Port Quantity | 2 |
Programming Required | No |
Pushrod Included | No |
Reservoir Included | Yes |
Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Brake warning light is on. |
Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Fluid spots beneath the car, indicating there may be a leak within the cylinder. |
Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Difficulty stopping the vehicle. |
Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | A low or sinking brake pedal. |
Signs of Wear & Troubleshooting - Section 1 - Header | Brake cylinder signs of wear include: |
Weight (lb) | 1.57 |
Width (in) | 8.38 |
APPLICATIONS:
- 2009-2011 Cadillac STS
- 2009-2015 Cadillac CTS
Product type:
Aftermarket
Brand Description:
Brake Master Cylinder
Product Description:
Brake Master Cylinder Assembly
Programming Required:
No
Mounting Bracket Included:
Yes
Mounting Hole Quantity:
2
Port Quantity:
2
Reservoir Included:
Yes
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality
Features & Benefits - Bullet 4:
Offering the quality, reliability, and durability of GM OE
Features & Benefits - Bullet 3:
GM-recommended replacement part for your GM vehicle's original factory component
Features & Benefits - Bullet 1:
Pressure tested to ensure safe and confident braking
Weight (lb) (Pound):
1.57
Height (in) (Inch):
6.5
Width (in) (Inch):
8.38
Length (in) (Inch):
10.75
Signs of Wear & Troubleshooting - Section 1 - Bull:
Fluid spots beneath the car, indicating there may be a leak within the cylinder.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake warning light is on.
Signs of Wear & Troubleshooting - Section 1 - Bull:
A low or sinking brake pedal.
Life Cycle Status:
Announced
Signs of Wear & Troubleshooting - Section 1 - Head:
Brake cylinder signs of wear include:
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Features & Benefits - Bullet 5:
Manufactured with GM Original Equipment specification for fit, form, and function
Item Level GTIN:
00707773855645
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Pushrod Included:
No
Master Cylinder Cap Included:
Yes
Master Cylinder Material:
Aluminum,Steel,Plastic
Brake Booster Included:
No
Bleeder Hoses Included:
No
Primary Outlet Thread Diameter (Inch):
0.551
Master Cylinder Bore Diameter (Inch):
1
Secondary Outlet Thread Diameter (Inch):
0.551
Primary Outlet Thread Diameter (Millimeter):
14
Secondary Outlet Thread Diameter (Millimeter):
14
Master Cylinder Bore Diameter (Millimeter):
25.4
Country of Origin:
Korea
Weight - Each (Gross Pounds):
01.57
Height - Each (Inch):
06.50
Length - Each (Inch):
10.75
Width - Each (Inch):
08.38