×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
GM Genuine Parts 176-1815 | Brake Hydraulic Hose
click to zoom in

GM Genuine Parts 176-1815 | Brake Hydraulic Hose

(No reviews yet) Write a Review
$34.84
Part Number
ACD176-1815
UPC:
808709705826
Condition:
New
5 customers are viewing this product

video gallery

Description

GM Genuine Parts Brake Hydraulic Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are quality reinforced hoses that carry fluid to transmit force within the brake system, and are designed to withstand high pressures. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: GM Genuine Parts

FEATURES:

  • brake-line;hydraulic-hose;rubber;stainless-steel;brake-hose;brake-job;front-brake;rear-brake;dot-3;dot-4;front-brakes;rear-brakes;brake-set;breaks
  • Chevrolet;Chevrolet;GMC;GMC
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM regularly updates production and service part designs to integrate new materials and technologies
  • Rear Passenger Side Brake Hose
  • Rear Passenger Side Hydraulic Brake Hose Assembly
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)

SPECIFICS:

End 1 Fitting TypeThreaded
End 1 Thread Diameter (in)0.472
End 1 Thread Diameter (mm)12
End 1 TypeInverted
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (in)1.5
Length (in)17.9
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Chirping or grinding noises when braking.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3A low or sinking brake pedal.
Signs of Wear & Troubleshooting - Section 1 - Bullet 4Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bullet 5Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - HeaderGeneral brake signs of wear include:
Weight (lb)0.6
Width (in)4

Attributes
Product type:
Aftermarket
Brand Description:
Rear Passenger Side Brake Hose
Product Description:
Rear Passenger Side Hydraulic Brake Hose Assembly
Mounting Hardware Included:
Yes
Programming Required:
No
Color:
Black Silver
Gasket Or Seal Included:
Yes
Axis 1 Length (Inch):
16.85
Bracket Material:
Steel
End 1 Type:
Inverted
End 2 Fitting Type:
Banjo
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
Features & Benefits - Bullet 4:
GM regularly updates production and service part designs to integrate new materials and technologies
Features & Benefits - Bullet 3:
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Features & Benefits - Bullet 1:
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Weight (lb) (Pound):
0.6
Height (in) (Inch):
1.5
Width (in) (Inch):
4
Length (in) (Inch):
17.9
Signs of Wear & Troubleshooting - Section 1 - Bull:
A low or sinking brake pedal.
Life Cycle Status:
Proposed
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Difficulty stopping the vehicle.
Item Level GTIN:
00808709705826
Signs of Wear & Troubleshooting - Section 1 - Bull:
Chirping or grinding noises when braking.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Head:
General brake signs of wear include:
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Teflon Lined:
No
End 1 Thread Diameter (in) (Inch):
0.472
End 1 Fitting Type:
Threaded
End 1 Thread Diameter (mm) (Millimeter):
12
Axis 1 Length (Millimeter):
428
End 1 Fitting Material:
Steel
End 2 Fitting Material:
Steel
Outer Sleeve Material:
Rubber
Country of Origin:
United States
Weight - Each (Gross Pounds):
01.22
Height - Each (Inch):
01.40
Length - Each (Inch):
18.00
Width - Each (Inch):
03.90



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top