×
close
click to zoom in

GM Genuine Parts 176-1841 | Rear Left Brake Hydraulic Hose

(No reviews yet) Write a Review
$39.09
Part Number
ACD176-1841
UPC:
808709641650
Condition:
New
5 customers are viewing this product

ACDelco GM Original Equipment Brake Hydraulic Hoses are quality reinforced hoses that carry fluid to transmit force within the brake system, and are GM-recommended replacements for your vehicle's original components. Brake lines and hoses are designed to withstand high pressures, and these brake hydraulic hoses have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.Rear Driver Side Hydraulic Brake Hose

BRAND: ACDelco

FEATURES:

  • Abs Components;Brake;Brake Caliper;Brake Caliper Lubricant;brake care;Brake Fluid;Brake Pad;Brake Parts;Brake Rotor;Brake Shoe;brakes care;Caliper;Drums;Durastop Brake Pads;Durastop Brake Parts;Durastop Ceramic Brake Pads;Low Voc Brake Parts Cleaner 15oz;Low Voc Brake Parts Cleaner 16oz;luxury hybrid brake pads;oem Brakes;Pads And Shoes;Rotor;Silicone Brake Lubricant
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Manufactured with GM Original Equipment specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE
  • Rear Driver Side Brake Hose

SPECIFICS:

ACD_RemanDesNo
Axis 1 Length331.72
End 1 Thread Diameter10.00
Good Maintenance Practices - S1 B1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - S1 B2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - S1 B3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - S1 B4Check the thickness of your brake pads.
Good Maintenance Practices - S1 HThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - S2 B1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - S2 B2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - S2 B3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - S2 B4Parking brake adjustments (as needed).
Good Maintenance Practices - S2 HThe following should be conducted by a qualified technician:
Marketing Statement - Product LineGet the GM quality you know and trust with ACDelco GM Original Equipment Brakes. Stay with the parts brand your GM vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Brakes are engineered for virtually every make and model of GM car, light duty truck, and sport utility vehicle.
Mkt_State_Warranty_CA36 Months/60,000 KM (Parts Only). Please see ACDelcocanada.com for more details.
Mkt_State_Warranty_US24 Month / Unlimited Mile Limited Warranty (Parts Only). Please see ACDelco.com for more details.
PAdb Update Date2016-04-19
Signs of Wear & Troubleshooting - S1 B1Chirping or grinding noises when braking.
Signs of Wear & Troubleshooting - S1 B2Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - S1 B3A low or sinking brake pedal.
Signs of Wear & Troubleshooting - S1 B4Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - S1 B5Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - S1 HGeneral brake signs of wear include:
Vintage_Part_IndicatorN

WIDE TRACK REAR AXLE(GTY), 4 WHL DISC BRAKES W/ DUAL REAR WHEELS(J96)

DOWNLOADS:

APPLICATIONS:

  • 2015-2019 GMC Sierra 3500 HD - Position: Rear Left
  • 2015-2019 Chevrolet Silverado 3500 HD - Position: Rear Left

Product type:
Aftermarket
Brand Description:
Rear Driver Side Brake Hose Assembly
Mounting Hardware Included:
Yes
Gasket Or Seal Included:
Yes
Axis 1 Length (Inch):
12.36
Bracket Material:
Steel
End 1 Type:
Inverted
End 2 Fitting Type:
Banjo
Bracket Included:
Yes
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Features & Benefits - Bullet 4:
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Features & Benefits - Bullet 3:
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
Features & Benefits - Bullet 1:
Is designed to carry hydraulic fluid throughout the hydraulic brake system
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Features & Benefits - Bullet 5:
GM regularly updates production and service part designs to integrate new materials and technologies
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Life Cycle Status:
Announced
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Item Level GTIN:
00808709641650
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
End 1 Fitting Type:
Female
End 1 Thread Diameter (mm) (Millimeter):
10
Axis 1 Length (Millimeter):
314
End 1 Fitting Material:
Steel
End 2 Fitting Material:
Steel
End 2 Fitting Inside Diameter:
10x1.5
Country of Origin:
United States
Weight - Each (Gross Pounds):
00.48
Height - Each (Inch):
01.70
Length - Each (Inch):
14.40
Width - Each (Inch):
02.20



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top