×
close
click to zoom in

GM Genuine Parts 177-1249 | Chevrolet Tahoe Rear Disc Brake Rotor

(No reviews yet) Write a Review
$106.99
Part Number
ACD177-1249
UPC:
808709735397
Condition:
New
5 customers are viewing this product

DOWNLOADS:

APPLICATIONS:

  • 2019-2020 Chevrolet Tahoe - Position: Rear
    • 3.08R(GU4), POSITRACTION L/SLIP R/AXL(G80) EXCEPT BRAKE LININGS MODIFICATION FOR URBAN USE(1LR)
  • 2015-2015 Chevrolet Tahoe - Position: Rear
    • 3.08R(GU4), POSITRACTION L/SLIP R/AXL(G80), BRAKE LININGS MODIFICATION FOR URBAN USE(1LR) 2nd Design USE ON VEHS W/ 9C1)(FOR 1ST DES SEE 23195438
  • 2015-2018 Chevrolet Tahoe - Position: Rear
  • 2016-2018 Chevrolet Tahoe - Position: Rear
    • 3.08R(GU4), POSITRACTION L/SLIP R/AXL(G80) EXCEPT BRAKE LININGS MODIFICATION FOR URBAN USE(1LR) 2nd Design USE ON VEHS W/ 9C1)(FOR 1ST DES SEE 23195438

Product type:
Aftermarket
Brand Description:
Rear Brake Rotor
Product Description:
Rear Disc Brake Rotor
ABS Tone Ring Included:
No
Grade Type:
Regular
Nominal Thickness (Inch):
0.795
Outside Diameter (Inch):
13.583
Discard Thickness (Inch):
0.728
Construction:
Full Cast
Material:
Gray Cast Iron
Slotted:
No
Solid Or Vented Type Rotor:
Vented
Surface Type:
Smooth
Lug Quantity:
6
Inside Diameter (Inch):
8.28
Programming Required:
No
Pad Contact Surface Width (Inch):
2.126
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
These rotors typically last two times longer, compared to non-FNC rotors, due to improved pad wear behavior
Features & Benefits - Bullet 4:
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Features & Benefits - Bullet 3:
OE brake components are specifically designed to work with your GM vehicle safety systems
Life Cycle Status:
Announced
Features & Benefits - Bullet 1:
Most GM OE brake rotors sold in the U.S are Ferritic Nitro-Carburized, or FNC rotor
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Weight (lb) (Pound):
21.16
Item Level GTIN:
00808709735397
Height (in) (Inch):
3.6
Width (in) (Inch):
13.8
Length (in) (Inch):
13.8
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Visible ridges or deep grooves on the rotor surface.
Features & Benefits - Bullet 7:
GM regularly updates production and service part designs to integrate new materials and technologies
Features & Benefits - Bullet 6:
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Features & Benefits - Bullet 5:
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Inside Diameter (Millimeter):
210.3
Outside Diameter (Millimeter):
345
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Height (mm) (Millimeter):
89.13
Bolt Circle Diameter (in) (Inch):
5.5
Bolt Circle Diameter (mm) (Millimeter):
139.7
Discard Thickness (Millimeter):
18.5
Nominal Thickness (Millimeter):
20.2
Pad Contact Surface Width (Millimeter):
54
Country of Origin:
Mexico
Weight - Each (Gross Pounds):
21.16
Height - Each (Inch):
05.50
Length - Each (Inch):
15.62
Width - Each (Inch):
15.62



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top