×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
ACDelco 179-1370 | Front Disc Brake Caliper Pin Kit
click to zoom in

ACDelco 179-1370 | Front Disc Brake Caliper Pin Kit

(No reviews yet) Write a Review
$37.99
Part Number
ACD179-1370
UPC:
21625525655
Condition:
New
5 customers are viewing this product

video gallery

Description

The ACDelco GM Original Equipment Disc Brake Caliper Guide Pin Kit contains GM-recommended replacements for your vehicle's original components. This kit includes the necessary bolts, fasteners, bushings, and other hardware where applicable for your vehicle's disc brake caliper applications, which have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Buick;Cadillac;Chevrolet;Oldsmobile;Pontiac;Saturn
  • Front Disc Brake Caliper Guide Pin Kit with Guide Pins
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Manufactured with GM Original Equipment specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE

SPECIFICS:

Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (in)0.9
Length (in)4.5
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Vehicle pulls to the left or right when brakes are applied.
Weight (lb)0.33
Width (in)2.1

APPLICATIONS:

  • 2000-2004 Buick Regal - Position: Front
  • 2001-2002 Oldsmobile Intrigue - Position: Front
  • 2002-2005 Cadillac DeVille - Position: Front
  • 2005-2009 Buick Allure - Position: Front
  • 2005-2009 Chevrolet Uplander - Position: Front
  • 2001-2009 Pontiac Montana - Position: Front
  • 2001-2008 Pontiac Grand Prix - Position: Front
  • 2005-2007 Buick Terraza - Position: Front
  • 2001-2001 Chevrolet Lumina - Position: Front
  • 2002-2005 Pontiac Bonneville - Position: Front
  • 2003-2005 Chevrolet Venture - Position: Front
    • Cast Iron
  • 2002-2005 Buick Park Avenue - Position: Front
  • 2002-2004 Cadillac Seville - Position: Front
  • 2001-2005 Chevrolet Impala - Position: Front
  • 2002-2003 Oldsmobile Aurora - Position: Front
  • 2001-2004 Oldsmobile Silhouette - Position: Front
  • 2005-2007 Saturn Relay - Position: Front
  • 2005-2009 Buick LaCrosse - Position: Front
  • 2001-2005 Chevrolet Monte Carlo - Position: Front
  • 2001-2005 Chevrolet Venture - Position: Front
  • 2002-2002 Cadillac Eldorado - Position: Front
  • 2003-2005 Pontiac Montana - Position: Front
    • Cast Iron
  • 2002-2005 Buick LeSabre - Position: Front
  • 2000-2005 Buick Century - Position: Front

Attributes
Product type:
Aftermarket
Product Description:
Front Disc Brake Caliper Guide Pin Kit with Guide Pins
Programming Required:
No
Bolt Thread Diameter (Inch):
0.551
Bolts Included:
Yes
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Offering the quality, reliability, and durability of GM OE
Features & Benefits - Bullet 3:
Manufactured with GM Original Equipment specification for fit, form, and function
Features & Benefits - Bullet 1:
GM-recommended replacement part for your GM vehicle's original factory component
Weight (lb) (Pound):
0.33
Height (in) (Inch):
0.9
Width (in) (Inch):
2.1
Length (in) (Inch):
4.5
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Life Cycle Status:
Announced
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Item Level GTIN:
00021625525655
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Caliper Grease Included:
Yes
Bolt Thread Diameter (Millimeter):
14
Pin Outside Diameter (Inch):
0.353
Pin 1 Length (Inch):
3.461
Pin Outside Diameter (Millimeter):
8.97
Pin 1 Length (Millimeter):
87.9
Pin Material:
Steel
Pin Beveled Ends:
Yes
Bolt Thread Type:
Fine
Country of Origin:
United States
Weight - Each (Gross Pounds):
00.33
Height - Each (Inch):
00.90
Length - Each (Inch):
04.50
Width - Each (Inch):
02.10



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top