ACDelco 179-1382 | Rear Drum Brake Adjusting Spring Kit
5 customers are viewing this product
The ACDelco GM Original Equipment Drum Brake Adjusting Spring Kit includes the necessary bolts, fasteners, bushings, and other hardware needed for your vehicle's drum brake, which are GM-recommended replacements for your vehicle's original components. This drum brake adjusting kit has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ?
BRAND: ACDelco
FEATURES:
- Chevrolet;GMC;Isuzu
- GM-recommended replacement part for your GM vehicle's original factory component
- Manufactured with GM Original Equipment specification for fit, form, and function
- Offering the quality, reliability, and durability of GM OE
SPECIFICS:
Adjuster Material | Steel |
Colored Springs | No |
Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems. |
Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
Height (in) | 1.9 |
Length (in) | 5.6 |
Meets or Exceeds Original Equipment Manufacture Specifications | Yes |
Programming Required | No |
Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Chirping or grinding noises when braking. |
Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Difficulty stopping the vehicle. |
Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | A low or sinking brake pedal. |
Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Brake pedal pulsation (not to be confused with normal ABS operation). |
Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Vehicle pulls to the left or right when brakes are applied. |
Signs of Wear & Troubleshooting - Section 1 - Header | Drum brake signs of wear include: |
Spring Color | Silver |
Spring Length (in) | 4.909 |
Weight (lb) | 0.16 |
Width (in) | 2.5 |
DOWNLOADS:
APPLICATIONS:
- 2007-2008 Isuzu i-290 - Position: Rear
- 2006-2006 Isuzu i-280 - Position: Rear
- 2007-2008 Isuzu i-370 - Position: Rear
- 2006-2006 Isuzu i-350 - Position: Rear
- 2004-2008 GMC Canyon - Position: Rear
- 2004-2008 Chevrolet Colorado - Position: Rear
Product type:
Aftermarket
Product Description:
Rear Drum Brake Adjusting Spring with Actuators
Programming Required:
No
Length (Inch):
5.6
Spring Color:
Silver
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Offering the quality, reliability, and durability of GM OE
Features & Benefits - Bullet 3:
Manufactured with GM Original Equipment specification for fit, form, and function
Features & Benefits - Bullet 1:
GM-recommended replacement part for your GM vehicle's original factory component
Weight (lb) (Pound):
0.16
Height (in) (Inch):
1.9
Width (in) (Inch):
2.5
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Life Cycle Status:
Announced
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Item Level GTIN:
00707773291887
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Colored Springs:
No
Adjuster Material:
Steel
Spring Length (in) (Inch):
4.909
Country of Origin:
United States
Weight - Each (Gross Pounds):
00.16
Height - Each (Inch):
01.90
Length - Each (Inch):
05.60
Width - Each (Inch):
02.50