×
close
click to zoom in

ACDelco 18A2793 | Front Disc Brake Rotor

(No reviews yet) Write a Review
$67.99
Part Number
ACD18A2793
UPC:
707773912461
Condition:
New
5 customers are viewing this product

ACDelco Gold (Professional) Black Hat Disc Brake Rotors are a high quality alternative to Original Equipment (OE) parts. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Black Hat Front Disc Brake Rotor
  • brake-pad;-brake-shoe;rotors;drum;brake-job;front-brake;rear-brake;cylider;hydraluic;dot-3;dot-4;front-brakes;rear-brakes;brake-set;breaks
  • Dodge;Jeep
  • Front Brake Rotor
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
  • Premium aftermarket replacement part
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional

SPECIFICS:

Bolt Circle Diameter (in)5
Bolt Circle Diameter (mm)127
Bolt Hole Quantity5
Center Bore Diameter (in)2.8 in
Center Bore Diameter (mm)72 mm
FAQ - Answer 1Yes, ACDelco also offers GM OE brake rotor and Advantage brake rotors.
FAQ - Question 1Does ACDelco offer other grades of brake rotors?
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (in)2.1
Height (mm)54.5
Length (in)14.1
Overall Rotor Diameter (mm)329.95 mm
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Squealing or grinding noises.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Low brake pedal height.
Signs of Wear & Troubleshooting - Section 1 - Bullet 4Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bullet 5Visible ridges or deep grooves on the rotor surface.
Signs of Wear & Troubleshooting - Section 1 - HeaderBrake rotor signs of wear include:
SlottedNo
Weight (lb)25.8
Width (in)14.1

APPLICATIONS:

  • 2011-2015 Dodge Durango - Position: Front
    • Except Heavy Duty Brakes
  • 2014-2014 Jeep Grand Cherokee - Position: Front
    • Rotor Diameter 330 MM
  • 2015-2020 Jeep Grand Cherokee - Position: Front
    • Except Heavy Duty Brakes Chrysler Brake Code BRY
  • 2011-2013 Jeep Grand Cherokee - Position: Front
    • Except Heavy Duty Brakes Chrysler Brake Code BRY
  • 2016-2016 Dodge Durango - Position: Front
    • with Brake Code BRY Except Heavy Duty Brakes
  • 2017-2018 Dodge Durango - Position: Front
    • Except Heavy Duty Brakes
  • 2019-2020 Dodge Durango - Position: Front
    • Except Heavy Duty Brakes Chrysler Brake Code BRY

Product type:
Aftermarket
Brand Description:
Front Brake Rotor
Product Description:
Black Hat Front Disc Brake Rotor
Grade Type:
Regular
Bolt Hole Quantity:
5
Nominal Thickness (Inch):
1.26
Outside Diameter (Inch):
13
Discard Thickness (Inch):
0.492
Rust Resistant Coating:
Yes
Construction:
Full Cast
Material:
Cast Iron
Slotted:
No
Solid Or Vented Type Rotor:
Vented
Surface Type:
Smooth
Hat Finish:
Turned
Disc Finish:
Ground
Programming Required:
No
Pad Contact Surface Width (Inch):
2.4
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Premium aftermarket replacement part
Features & Benefits - Bullet 3:
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Life Cycle Status:
Announced
Features & Benefits - Bullet 1:
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Weight (lb) (Pound):
25.8
Item Level GTIN:
00707773912461
Height (in) (Inch):
2.1
Width (in) (Inch):
14.1
Length (in) (Inch):
14.1
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bull:
Visible ridges or deep grooves on the rotor surface.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Squealing or grinding noises.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Low brake pedal height.
FAQ - Question 1:
Does ACDelco offer other grades of brake rotors?
Signs of Wear & Troubleshooting - Section 1 - Head:
Brake rotor signs of wear include:
FAQ - Answer 1:
Yes, ACDelco also offers GM OE brake rotor and Advantage brake rotors.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Outside Diameter (Millimeter):
330
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Center Bore Diameter (in):
2.8 in
Center Bore Diameter (mm):
72 mm
Height (mm) (Millimeter):
54.5
Bolt Circle Diameter (in) (Inch):
5
Bolt Circle Diameter (mm) (Millimeter):
127
ABS Sensor Ring Included:
No
Discard Thickness (Millimeter):
12.496
Nominal Thickness (Millimeter):
32.004
Pad Contact Surface Width (Millimeter):
60.25
Overall Rotor Diameter (mm):
329.95 mm
Country of Origin:
China
Weight - Each (Gross Pounds):
25.80
Height - Each (Inch):
04.40
Length - Each (Inch):
14.10
Width - Each (Inch):
14.10



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top