×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
ACDelco 18A2838 | Front Disc Brake Rotor
click to zoom in

ACDelco 18A2838 | Front Disc Brake Rotor

(No reviews yet) Write a Review
$118.79
Part Number
ACD18A2838
UPC:
8.08709E+11
Condition:
New
5 customers are viewing this product

video gallery

Description

ACDelco Professional Disc Brake Rotors provide reliable vehicle braking power and are a high quality replacement for many vehicles on the road today. They feature a thickness variation that is less than 0.0004 to minimize pedal pulsation, noise, and help to extend brake pad life. These rotors meet the SAE standard for structural integrity with OE matched G3000 qualified material delivering guaranteed performance. Also, no machining is required. ACDelco Advantage Disc Brake Rotors are ready to be installed right out of the box. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Follows original manufacturers' designs for dispersing heat, helping to prolong pad and rotor life while reducing noise and vibration
  • Independently tested with Noise/Vibration/Harshness (NVH) and durability/wear testing; resulting in high quality and reliable products
  • Inspected for balance; resulting in smooth brake operation and noise reduction
  • Land Rover

SPECIFICS:

ABS Sensor Ring IncludedNo
Bolt Circle Diameter (in)4.7
Bolt Circle Diameter (mm)120
Bolt Hole Quantity5
Center Bore Diameter (in)3.1 in
Center Bore Diameter (mm)79 mm
ConstructionFull Cast
Disc FinishTurned
FAQ - Answer 1Yes, ACDelco also offers GM OE brake rotor and Advantage brake rotors.
FAQ - Question 1Does ACDelco offer other grades of brake rotors?
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Grade TypeRegular
Hat FinishTurned
Height (in)2.4
Height (mm)62
MaterialCast Iron
Overall Rotor Diameter (mm)379.98 mm
Programming RequiredNo
Rust Resistant CoatingYes
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Squealing or grinding noises.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Low brake pedal height.
Signs of Wear & Troubleshooting - Section 1 - Bullet 4Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bullet 5Visible ridges or deep grooves on the rotor surface.
Signs of Wear & Troubleshooting - Section 1 - HeaderBrake rotor signs of wear include:
SlottedNo
Solid Or Vented Type RotorVented
Surface TypeSmooth

APPLICATIONS:

  • 2014-2019 Land Rover Range Rover Sport - Position: Front
  • 2020-2021 Land Rover Range Rover - Position: Front
    • 380mm Rotor Diameter
  • 2010-2011 Land Rover Range Rover Sport - Position: Front
  • 2021-2021 Land Rover Range Rover Sport - Position: Front
    • 380mm Rotor Diameter
  • 2013-2019 Land Rover Range Rover - Position: Front
  • 2012-2013 Land Rover Range Rover Sport - Position: Front
    • TSB LTB00317 Has Been Performed

Attributes
Product type:
Aftermarket
Brand Description:
Front Brake Rotor
Product Description:
Front Disc Brake Rotor
Grade Type:
Regular
Bolt Hole Quantity:
5
Nominal Thickness (Inch):
1.339
Outside Diameter (Inch):
15
Discard Thickness (Inch):
1.22
Rust Resistant Coating:
Yes
Construction:
Full Cast
Material:
Cast Iron
Slotted:
No
Solid Or Vented Type Rotor:
Vented
Surface Type:
Smooth
Hat Finish:
Turned
Disc Finish:
Turned
Programming Required:
No
Pad Contact Surface Width (Inch):
3.1
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Independently tested with Noise/Vibration/Harshness (NVH) and durability/wear testing; resulting in high quality and reliable products
Features & Benefits - Bullet 3:
Follows original manufacturers' designs for dispersing heat, helping to prolong pad and rotor life while reducing noise and vibration
Life Cycle Status:
Announced
Features & Benefits - Bullet 1:
Inspected for balance; resulting in smooth brake operation and noise reduction
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Height (in) (Inch):
2.4
Item Level GTIN:
00808709004493
Signs of Wear & Troubleshooting - Section 1 - Bull:
Squealing or grinding noises.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Low brake pedal height.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Visible ridges or deep grooves on the rotor surface.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
FAQ - Question 1:
Does ACDelco offer other grades of brake rotors?
Signs of Wear & Troubleshooting - Section 1 - Head:
Brake rotor signs of wear include:
FAQ - Answer 1:
Yes, ACDelco also offers GM OE brake rotor and Advantage brake rotors.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Outside Diameter (Millimeter):
380
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Center Bore Diameter (in):
3.1 in
Center Bore Diameter (mm):
79 mm
Height (mm) (Millimeter):
62
Bolt Circle Diameter (in) (Inch):
4.7
Bolt Circle Diameter (mm) (Millimeter):
120
ABS Sensor Ring Included:
No
Discard Thickness (Millimeter):
30.988
Nominal Thickness (Millimeter):
34.01
Pad Contact Surface Width (Millimeter):
80
Overall Rotor Diameter (mm):
379.98 mm
Country of Origin:
China
Weight - Each (Gross Pounds):
34.20
Height - Each (Inch):
05.60
Length - Each (Inch):
16.10
Width - Each (Inch):
16.10



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top