×
close
click to zoom in

ACDelco 18E370265 | Rear Drum Brake Wheel Cylinder

(No reviews yet) Write a Review
$9.99
Part Number
ACD18E370265
UPC:
808709782162
Condition:
New
5 customers are viewing this product

ACDelco Professional Drum Brake Wheel Cylinders use both aluminum and iron castings making them a high quality replacement for many vehicles on the road today. These wheel cylinders contain both Ethylene Propylene (EPDM) and Styrene Butadiene (SBR) rubber components to provide superior resistance to heat, corrosion, and leakage. Formulated with a smooth bore finish, these cylinders have a quality seal to help increase the life of rubber components. ACDelco Professional Drum Brake Wheel Cylinders are ready to bench bleed and install right out of the box - no assembly required. These premium aftermarket replacement drum brake wheel cylinders are manufactured to meet your expectations for fit, form, and function. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Buick|Cadillac|Chevrolet|Oldsmobile|Pontiac
  • Cast iron and aluminum specifications| no extra stress on the brake boosting mounting
  • Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality
  • Pressure tested to ensure safe and confident braking
  • Trivalent coated bleeder screws provide extra protection and added durability

SPECIFICS:

Attachment TypeBolted
Bleeder Screw Cap IncludedNo
Bleeder Screw IncludedYes
FAQ - Answer 1No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
FAQ - Answer 2Yes, ACDelco also offers GM OE brake cylinders.
FAQ - Answer 3Yes, ACDelco Professional Brake Cylinders come with a 12 month / unlimited mile warranty.
FAQ - Question 1Do I have to replace all my brake parts when replacing my brake cylinder?
FAQ - Question 2Does ACDelco offer other grades of brake cylinders?
FAQ - Question 3Are these brake parts durable?
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (in)2.16
Mounting Hardware IncludedNo
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Brake warning light is on.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Fluid spots beneath the car, indicating there may be a leak within the cylinder.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bullet 4A low or sinking brake pedal.
Signs of Wear & Troubleshooting - Section 1 - HeaderBrake cylinder signs of wear include:
Weight (lb)1.1
Width (in)3.25

APPLICATIONS:

  • 1987-1990 Buick Electra - Position: Rear
  • 1993-1996 Oldsmobile Cutlass Ciera - Position: Rear
  • 1992-1996 Chevrolet Beretta - Position: Rear
    • Except Vehicles Built For United States Market
  • 1990-1990 Cadillac Fleetwood - Position: Rear
    • w/ 8.86" X 1.77" Brakes
  • 1996-1999 Pontiac Bonneville - Position: Rear
  • 1986-1991 Buick LeSabre - Position: Rear
  • 1996-1996 Oldsmobile 98 - Position: Rear
  • 1996-1999 Oldsmobile 88 - Position: Rear
  • 1992-1996 Chevrolet Corsica - Position: Rear
    • Except Vehicles Built For United States Market
  • 1986-1991 Oldsmobile Delta 88 - Position: Rear
  • 1993-2003 Buick Century - Position: Rear
  • 1987-1990 Oldsmobile 98 - Position: Rear
  • 1987-1989 Cadillac Fleetwood - Position: Rear
  • 1996-1999 Buick LeSabre - Position: Rear
  • 1996-1996 Buick Park Avenue - Position: Rear
  • 1995-1999 Chevrolet Monte Carlo - Position: Rear
  • 1996-1999 Oldsmobile LSS - Position: Rear
  • 1987-1990 Cadillac DeVille - Position: Rear
    • w/ 8.86" X 1.77" Brakes
  • 1994-1994 Pontiac Sunbird - Position: Rear
    • Except Vehicles Built For United States Market
  • 1995-2002 Chevrolet Cavalier - Position: Rear
    • Except Vehicles Built For United States Market
  • 1999-1999 Buick Regal - Position: Rear
  • 1994-2001 Chevrolet Lumina - Position: Rear
  • 1987-1991 Pontiac Bonneville - Position: Rear
    • Vehicles Built For United States Market
  • 1997-1998 Oldsmobile Regency - Position: Rear
  • 1993-1993 Oldsmobile Cutlass Cruiser - Position: Rear

Product type:
Aftermarket
Brand Description:
Rear Brake Wheel Cylinder
Product Description:
Rear Drum Brake Wheel Cylinder
Mounting Hardware Included:
No
Programming Required:
No
Length (Inch):
4.12
Attachment Type:
Bolted
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Pressure tested to ensure safe and confident braking
Features & Benefits - Bullet 4:
Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
Features & Benefits - Bullet 3:
Trivalent coated bleeder screws provide extra protection and added durability
Features & Benefits - Bullet 1:
Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality
Weight (lb) (Pound):
1.1
Height (in) (Inch):
2.16
Width (in) (Inch):
3.25
Signs of Wear & Troubleshooting - Section 1 - Bull:
Fluid spots beneath the car, indicating there may be a leak within the cylinder.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake warning light is on.
Signs of Wear & Troubleshooting - Section 1 - Bull:
A low or sinking brake pedal.
FAQ - Answer 2:
Yes, ACDelco also offers GM OE brake cylinders.
FAQ - Question 3:
Are these brake parts durable?
Life Cycle Status:
Announced
FAQ - Question 1:
Do I have to replace all my brake parts when replacing my brake cylinder?
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
FAQ - Question 2:
Does ACDelco offer other grades of brake cylinders?
Item Level GTIN:
00808709782162
Signs of Wear & Troubleshooting - Section 1 - Head:
Brake cylinder signs of wear include:
FAQ - Answer 1:
No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
FAQ - Answer 3:
Yes, ACDelco Professional Brake Cylinders come with a 12 month / unlimited mile warranty.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Bleeder Screw Included:
Yes
Bleeder Screw Cap Included:
No
Country of Origin:
Taiwan
Weight - Each (Gross Pounds):
01.10
Weight - Case (Gross Pounds):
08.80
Height - Each (Inch):
02.16
Height - Case (Inch):
07.44
Length - Each (Inch):
04.12
Length - Case (Inch):
08.75
Width - Each (Inch):
03.25
Width - Case (Inch):
08.25



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top