×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
ACDelco 18J2030 | Brake Hydraulic Hose
click to zoom in

ACDelco 18J2030 | Brake Hydraulic Hose

(No reviews yet) Write a Review
$8.99
Part Number
ACD18J2030
UPC:
707773285077
Condition:
New
5 customers are viewing this product

video gallery

Description

ACDelco Brake Hydraulic Hoses are quality reinforced hoses that carry fluid to transmit force within the hydraulic brake system. Each brake hose contains double-crimped fittings to provide longer service life and durability. The ACDelco Professional Brake Hydraulic Hose is a high quality replacement component for your vehicle's braking system. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • brake-line;hydraulic-hose;rubber;stainless-steel;brake-hose;brake-job;front-brake;rear-brake;dot-3;dot-4;front-brakes;rear-brakes;brake-set;breaks
  • Chevrolet;GMC
  • Front Hydraulic Brake Hose Assembly
  • Includes OE features such as brackets, grommets, molded plastic guards, and wire clips to provide correct fit and easy installation
  • Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety
  • Premium brass fittings provide an excellent hydraulic seal

SPECIFICS:

End 1 Fitting Type7/16-20
End 1 Thread Diameter (in)0.437
End 1 Thread Diameter (mm)11.11
End 2 Fitting Type3/8-24
FAQ - Answer 1Yes, ACDelco Professional Brake Kits and Hardware come with a 12 month/ unlimited mile warranty.
FAQ - Answer 2Yes, it is a good idea to inspect your brake fluid often.
FAQ - Answer 3Yes, both part offerings are high quality replacement parts.
FAQ - Question 1Are these brake parts durable?
FAQ - Question 2Do I need to check my brake fluid when replacing other brake parts?
FAQ - Question 3Can I use ACDelco GM Original Equipment parts with my ACDelco Professional brake parts?
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (in)3.03
Jacket MaterialEPDM Rubber
Length (in)7.12
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Visible ridges on rotor surface.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Chirping, grinding, or squeaking noises when braking.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bullet 4A low or sinking brake pedal.
Signs of Wear & Troubleshooting - Section 1 - Bullet 5Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bullet 6Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - HeaderBrake rotor signs of wear include:
Weight (lb)6.92
Width (in)4.53

APPLICATIONS:

  • 1969-1970 Chevrolet Blazer - Position: Front
  • 1972-1972 GMC K25/K2500 Pickup - Position: Rear
    • 13.25" Length
  • 1968-1970 GMC C15/C1500 Suburban - Position: Front
  • 1971-1971 Chevrolet G20 Van - Position: Front
  • 1968-1970 GMC C15/C1500 Pickup - Position: Front
  • 1968-1970 Chevrolet C10 Pickup - Position: Front
  • 1971-1971 GMC G15/G1500 Van - Position: Front
  • 1968-1970 GMC C35/C3500 Pickup - Position: Front
  • 1968-1970 Chevrolet P10 Van - Position: Front
  • 1972-1972 GMC C25/C2500 Pickup - Position: Rear Center
    • 13.25" Length
  • 1968-1970 GMC P35/P3500 Van - Position: Front
    • without Dual Rear Wheels
  • 1972-1972 Chevrolet C20 Pickup - Position: Rear Center
    • 13.25" Length
  • 1971-1971 Chevrolet G30 Van - Position: Front
  • 1968-1970 GMC C25/C2500 Pickup - Position: Front
  • 1972-1972 Chevrolet C20 Suburban - Position: Rear Center
    • 13.25" Length
  • 1968-1970 Chevrolet C30 Pickup - Position: Front
  • 1972-1972 GMC C25/C2500 Suburban - Position: Rear Center
    • 13.25" Length
  • 1968-1970 Chevrolet C20 Pickup - Position: Front
  • 1972-1972 Chevrolet K20 Pickup - Position: Rear Center
    • 13.25" Length

Attributes
Product type:
Aftermarket
Product Description:
Front Hydraulic Brake Hose Assembly
Mounting Hardware Included:
Yes
Programming Required:
No
Color:
Black Hose
Gasket Or Seal Included:
No
Axis 1 Length (Inch):
13.125
Bracket Material:
Corrosion Resistant Steel
End 2 Fitting Type:
3/8-24
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Premium brass fittings provide an excellent hydraulic seal
Features & Benefits - Bullet 3:
Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety
Features & Benefits - Bullet 1:
Includes OE features such as brackets, grommets, molded plastic guards, and wire clips to provide correct fit and easy installation
Weight (lb) (Pound):
6.92
Height (in) (Inch):
3.03
Width (in) (Inch):
4.53
Length (in) (Inch):
7.12
Signs of Wear & Troubleshooting - Section 1 - Bull:
Visible ridges on rotor surface.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Chirping, grinding, or squeaking noises when braking.
Life Cycle Status:
Announced
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Signs of Wear & Troubleshooting - Section 1 - Bull:
A low or sinking brake pedal.
Item Level GTIN:
00707773285077
Signs of Wear & Troubleshooting - Section 1 - Bull:
Difficulty stopping the vehicle.
FAQ - Answer 2:
Yes, it is a good idea to inspect your brake fluid often.
FAQ - Question 3:
Can I use ACDelco GM Original Equipment parts with my ACDelco Professional brake parts?
FAQ - Question 1:
Are these brake parts durable?
FAQ - Question 2:
Do I need to check my brake fluid when replacing other brake parts?
Signs of Wear & Troubleshooting - Section 1 - Head:
Brake rotor signs of wear include:
FAQ - Answer 1:
Yes, ACDelco Professional Brake Kits and Hardware come with a 12 month/ unlimited mile warranty.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
FAQ - Answer 3:
Yes, both part offerings are high quality replacement parts.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Teflon Lined:
No
End 1 Thread Diameter (in) (Inch):
0.437
End 1 Fitting Type:
7/16-20
End 1 Thread Diameter (mm) (Millimeter):
11.11
Axis 1 Length (Millimeter):
333.375
End 1 Fitting Material:
Corrosion Resistant Steel
End 2 Fitting Material:
Corrosion Resistant Steel
Jacket Material:
EPDM Rubber
Country of Origin:
China
Weight - Each (Gross Pounds):
06.92
Weight - Case (Gross Pounds):
173.00
Height - Each (Inch):
03.03
Height - Case (Inch):
08.00
Length - Each (Inch):
07.12
Length - Case (Inch):
15.62
Width - Each (Inch):
04.53
Width - Case (Inch):
09.88



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top