×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
ACDelco 18J2119 | Rear Center Brake Hydraulic Hose
click to zoom in

ACDelco 18J2119 | Rear Center Brake Hydraulic Hose

(No reviews yet) Write a Review
$17.00
Part Number
ACD18J2119
UPC:
7.07773E+11
Condition:
New
5 customers are viewing this product

video gallery

Description

ACDelco Brake Hydraulic Hoses are quality reinforced hoses that carry fluid to transmit force within the hydraulic brake system. Each brake hose contains double-crimped fittings to provide longer service life and durability. The ACDelco Professional Brake Hydraulic Hose is a high quality replacement component for your vehicle's braking system. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • brake-line;hydraulic-hose;rubber;stainless-steel;brake-hose;brake-job;front-brake;rear-brake;dot-3;dot-4;front-brakes;rear-brakes;brake-set;breaks
  • Buick;Cadillac;Chevrolet;GMC;Oldsmobile;Pontiac
  • Includes OE features such as brackets, grommets, molded plastic guards, and wire clips to provide correct fit and easy installation
  • Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety
  • Premium brass fittings provide an excellent hydraulic seal
  • Rear Hydraulic Brake Hose Assembly

SPECIFICS:

End 1 Fitting Type(2)3/8-24
End 1 Thread Diameter (in)0.375
End 1 Thread Diameter (mm)9.525
End 2 Fitting Type7/16-24
FAQ - Answer 1Yes, ACDelco Professional Brake Kits and Hardware come with a 12 month/ unlimited mile warranty.
FAQ - Answer 2Yes, it is a good idea to inspect your brake fluid often.
FAQ - Answer 3Yes, both part offerings are high quality replacement parts.
FAQ - Question 1Are these brake parts durable?
FAQ - Question 2Do I need to check my brake fluid when replacing other brake parts?
FAQ - Question 3Can I use ACDelco GM Original Equipment parts with my ACDelco Professional brake parts?
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (in)3.03
Jacket MaterialEPDM Rubber
Length (in)7.12
Measurements11 X 2 in
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Visible ridges on rotor surface.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Chirping, grinding, or squeaking noises when braking.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bullet 4A low or sinking brake pedal.
Signs of Wear & Troubleshooting - Section 1 - Bullet 5Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bullet 6Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - HeaderBrake rotor signs of wear include:
Weight (lb)0.38
Width (in)4.53

APPLICATIONS:

  • 1974-1974 GMC K25/K2500 Suburban - Position: Rear Center
  • 1974-1974 GMC K15/K1500 Suburban - Position: Rear Center
  • 1974-1974 Chevrolet P30 Van - Position: Rear Center
    • with 13 IN x 3-1/2 IN Brakes Motorhome Chassis Except DANA Axle
  • 1974-1974 GMC C25/C2500 Suburban - Position: Rear Center
  • 1974-1976 Buick Estate Wagon - Position: Rear Center
  • 1987-1987 GMC V1500 - Position: Rear Center
  • 1968-1968 Chevrolet K20 Suburban - Position: Rear Center
  • 1975-1978 GMC P35 - Position: Rear Center
  • 1975-1978 GMC K25 - Position: Rear Center
  • 1975-1975 Chevrolet P30 - Position: Rear Center
    • with 13 IN x 2-1/2 IN Brakes with 11 IN x 2.75 IN Brakes
  • 1987-1987 Chevrolet R10 - Position: Rear Center
  • 1989-1991 Chevrolet R2500 Suburban - Position: Rear Center
  • 1974-1975 Oldsmobile Omega - Position: Rear Center
  • 1974-1974 GMC C35/C3500 Pickup - Position: Rear Center
  • 1974-1975 Chevrolet Bel Air - Position: Rear Center
  • 1975-1980 Chevrolet P10 - Position: Rear Center
  • 1987-1987 Chevrolet V10 - Position: Rear Center
  • 1980-1984 Chevrolet P30 - Position: Rear Center
    • with 13 IN x 3-1/2 IN Brakes
  • 1978-1978 GMC P35 - Position: Rear Center
    • without 11000lb Axle with 13 IN x 2-1/2 IN Brakes
  • 1975-1975 Buick Skyhawk - Position: Rear Center
  • 1975-1986 Chevrolet K20 - Position: Rear Center
  • 1975-1978 GMC K15 - Position: Rear Center
  • 1975-1976 Pontiac Grand Safari - Position: Rear Center
  • 1974-1986 Chevrolet K10 Suburban - Position: Rear Center
  • 1975-1989 Chevrolet P20 - Position: Rear Center
  • 1974-1975 Pontiac Firebird - Position: Rear Center
  • 1975-1978 GMC C15 - Position: Rear Center
  • 1977-1986 Chevrolet K30 - Position: Rear Center
  • 1975-1986 Chevrolet C20 - Position: Rear Center
  • 1974-1974 GMC C15/C1500 Pickup - Position: Rear Center
  • 1981-1983 GMC C1500 - Position: Rear Center
    • w/ 11" Rear Brakes
  • 1975-1986 Chevrolet C10 - Position: Rear Center
  • 1989-1991 Chevrolet R3500 - Position: Rear Center
  • 1987-1987 Chevrolet V20 - Position: Rear Center
  • 1974-1974 Chevrolet Blazer - Position: Rear Center
  • 1987-1989 GMC R2500 - Position: Rear Center
  • 1979-1986 GMC K2500 Suburban - Position: Rear Center
  • 1975-1986 Chevrolet K5 Blazer - Position: Rear Center
  • 1974-1974 GMC K25/K2500 Pickup - Position: Rear Center
  • 1977-1977 GMC P35 - Position: Rear Center
    • with 13 IN x 3-1/2 IN Brakes Motorhome Chassis Except DANA Axle
  • 1976-1976 Buick Skyhawk - Position: Rear
  • 1976-1976 GMC P35 - Position: Rear Center
    • without 11000lb Axle with 13 IN x 2-1/2 IN Brakes
  • 1989-1991 Chevrolet R1500 Suburban - Position: Rear Center
  • 1987-1991 GMC R1500 Suburban - Position: Rear Center
  • 1974-1976 Oldsmobile Custom Cruiser - Position: Rear Center
  • 1975-1978 GMC P15 - Position: Rear Center
  • 1975-1978 GMC C25 - Position: Rear Center
  • 1974-1974 GMC P15/P1500 Van - Position: Rear Center
  • 1974-1975 Chevrolet Camaro - Position: Rear Center
  • 1974-1986 Chevrolet C10 Suburban - Position: Rear Center
  • 1987-1991 GMC R2500 Suburban - Position: Rear Center
  • 1975-1975 Oldsmobile Starfire - Position: Rear Center
  • 1976-1976 Pontiac Sunbird - Position: Rear Center
  • 1987-1988 Chevrolet R20 - Position: Rear Center
  • 1975-1978 GMC K15 Suburban - Position: Rear Center
  • 1974-1975 Chevrolet Nova - Position: Rear Center
  • 1975-1975 GMC P35 - Position: Rear Center
    • with 13 IN x 3-1/2 IN Brakes Motorhome Chassis Except DANA Axle
  • 1978-1979 Chevrolet P30 - Position: Rear Center
    • 14-11/16" Length
  • 1974-1974 Chevrolet C10 Pickup - Position: Rear Center
  • 1975-1976 Chevrolet Vega - Position: Rear Center
  • 1974-1974 GMC C15/C1500 Suburban - Position: Rear Center
  • 1994-1999 Chevrolet P30 - Position: Rear Center
    • Except Motorhome Chassis
  • 1979-1986 GMC C1500 Suburban - Position: Rear Center
  • 1987-1991 GMC R3500 - Position: Rear Center
  • 1975-1978 GMC C15 Suburban - Position: Rear Center
  • 1979-1986 GMC K2500 - Position: Rear Center
  • 1994-1999 GMC P3500 - Position: Rear Center
  • 1974-1975 Pontiac Ventura - Position: Rear Center
  • 1974-1974 Chevrolet P30 Van - Position: Rear Center
  • 1974-1978 Oldsmobile Toronado - Position: Rear Center
  • 1974-1975 Buick Apollo - Position: Rear Center
  • 1974-1974 Chevrolet P10 Van - Position: Rear Center
  • 1975-1978 GMC C35 - Position: Rear Center
  • 1979-1986 GMC K3500 - Position: Rear Center
  • 1987-1991 GMC V1500 Suburban - Position: Rear Center
  • 1977-1977 Chevrolet P30 - Position: Rear Center
    • with 13 IN x 2-1/2 IN Brakes with 11 IN x 2.75 IN Brakes
  • 1979-1986 GMC K1500 - Position: Rear Center
  • 1975-1975 Buick Skylark - Position: Rear Center
  • 1987-1987 GMC R1500 - Position: Rear Center
  • 1987-1988 Chevrolet R20 Suburban - Position: Rear Center
  • 1974-1974 Chevrolet C20 Pickup - Position: Rear Center
  • 1974-1974 Pontiac Parisienne - Position: Rear Center
  • 1987-1988 Chevrolet R10 Suburban - Position: Rear Center
  • 1987-1988 Chevrolet V20 Suburban - Position: Rear Center
  • 1985-1993 Chevrolet P30 - Position: Rear Center
    • with 13in x 2-1/2in or 13in x 3-1/2in Brakes
  • 1974-1974 Chevrolet K10 Pickup - Position: Rear Center
  • 1977-1978 GMC K35 - Position: Rear Center
  • 1989-1991 Chevrolet V3500 - Position: Rear Center
  • 1987-1988 Chevrolet V10 Suburban - Position: Rear Center
  • 1975-1978 GMC K25 Suburban - Position: Rear Center
  • 1974-1974 GMC P35/P3500 Van - Position: Rear Center
  • 1984-1986 GMC C1500 - Position: Rear Center
    • with 11 IN x 2 IN Brakes
  • 1975-1975 Pontiac Astre - Position: Rear Center
  • 1974-1974 GMC K15/K1500 Pickup - Position: Rear Center
  • 1975-1975 Chevrolet Monza - Position: Rear Center
  • 1987-1987 GMC V2500 - Position: Rear Center
  • 1989-1991 Chevrolet V2500 Suburban - Position: Rear Center
  • 1976-1976 Chevrolet P30 - Position: Rear Center
    • with 13 IN x 3-1/2 IN Brakes Motorhome Chassis Except DANA Axle
  • 1979-1984 GMC P3500 - Position: Rear Center
    • with 13 IN Brakes
  • 1979-1980 GMC P1500 - Position: Rear Center
  • 1975-1975 Pontiac Bonneville - Position: Rear Center
  • 1974-1974 Chevrolet P20 Van - Position: Rear Center
  • 1974-1974 GMC P25/P2500 Van - Position: Rear Center
  • 1987-1988 Chevrolet V30 - Position: Rear Center
  • 1974-1991 GMC Jimmy - Position: Rear Center
  • 1989-1989 Chevrolet R2500 - Position: Rear Center
  • 1974-1976 Pontiac Catalina - Position: Rear Center
  • 1979-1980 GMC C1500 - Position: Rear Center
  • 1987-1991 Chevrolet Blazer - Position: Rear Center
  • 1974-1974 GMC C25/C2500 Pickup - Position: Rear Center
  • 1975-1986 Chevrolet K10 - Position: Rear Center
  • 1987-1991 GMC V2500 Suburban - Position: Rear Center
  • 1974-1974 Chevrolet K20 Pickup - Position: Rear Center
  • 1975-1977 Chevrolet P30 - Position: Rear Center
  • 1975-1978 GMC C25 Suburban - Position: Rear Center
  • 1987-1988 Chevrolet R30 - Position: Rear Center
  • 1975-1986 Chevrolet C30 - Position: Rear Center
  • 1974-1974 GMC P35/P3500 Van - Position: Rear Center
    • with 13 IN x 3-1/2 IN Brakes Motorhome Chassis Except DANA Axle
  • 1979-1986 GMC C2500 - Position: Rear Center
  • 1975-1978 GMC P25 - Position: Rear Center
  • 1974-1986 Chevrolet K20 Suburban - Position: Rear Center
  • 1974-1976 Chevrolet Impala - Position: Rear Center
  • 1989-1991 Chevrolet V1500 Suburban - Position: Rear Center
  • 1979-1986 GMC K1500 Suburban - Position: Rear Center
  • 1987-1991 GMC V3500 - Position: Rear Center
  • 1979-1986 GMC C2500 Suburban - Position: Rear Center
  • 1979-1989 GMC P2500 - Position: Rear Center
  • 1976-1979 Cadillac Seville - Position: Rear Center
  • 1985-1993 GMC P3500 - Position: Rear Center
    • with 13in x 2-1/2in or 13in x 3-1/2in Brakes
  • 1974-1986 Chevrolet C20 Suburban - Position: Rear Center
  • 1979-1986 GMC C3500 - Position: Rear Center
  • 1974-1974 Chevrolet C30 Pickup - Position: Rear Center

Attributes
Product type:
Aftermarket
Product Description:
Rear Hydraulic Brake Hose Assembly
Mounting Hardware Included:
Yes
Programming Required:
No
Color:
Black Hose
Gasket Or Seal Included:
No
Axis 1 Length (Inch):
14.6875
Bracket Material:
Corrosion Resistant Steel
End 2 Fitting Type:
7/16-24
Measurements:
11 X 2 in
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Premium brass fittings provide an excellent hydraulic seal
Features & Benefits - Bullet 3:
Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety
Features & Benefits - Bullet 1:
Includes OE features such as brackets, grommets, molded plastic guards, and wire clips to provide correct fit and easy installation
Weight (lb) (Pound):
0.38
Height (in) (Inch):
3.03
Width (in) (Inch):
4.53
Length (in) (Inch):
7.12
Signs of Wear & Troubleshooting - Section 1 - Bull:
Visible ridges on rotor surface.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Life Cycle Status:
Announced
Signs of Wear & Troubleshooting - Section 1 - Bull:
Difficulty stopping the vehicle.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Chirping, grinding, or squeaking noises when braking.
Item Level GTIN:
00707773318874
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bull:
A low or sinking brake pedal.
FAQ - Answer 2:
Yes, it is a good idea to inspect your brake fluid often.
FAQ - Question 3:
Can I use ACDelco GM Original Equipment parts with my ACDelco Professional brake parts?
FAQ - Question 1:
Are these brake parts durable?
FAQ - Question 2:
Do I need to check my brake fluid when replacing other brake parts?
Signs of Wear & Troubleshooting - Section 1 - Head:
Brake rotor signs of wear include:
FAQ - Answer 1:
Yes, ACDelco Professional Brake Kits and Hardware come with a 12 month/ unlimited mile warranty.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
FAQ - Answer 3:
Yes, both part offerings are high quality replacement parts.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Teflon Lined:
No
End 1 Thread Diameter (in) (Inch):
0.375
End 1 Fitting Type:
(2)3/8-24
End 1 Thread Diameter (mm) (Millimeter):
9.525
Axis 1 Length (Millimeter):
373.0625
End 1 Fitting Material:
Corrosion Resistant Steel
End 2 Fitting Material:
Corrosion Resistant Steel
Jacket Material:
EPDM Rubber
Country of Origin:
China
Weight - Each (Gross Pounds):
00.38
Weight - Case (Gross Pounds):
07.60
Height - Each (Inch):
03.03
Height - Case (Inch):
08.00
Length - Each (Inch):
07.12
Length - Case (Inch):
15.62
Width - Each (Inch):
04.53
Width - Case (Inch):
09.88



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top