click to zoom in
ACDelco 18K1524 | Disc Brake Caliper Bushing
5 customers are viewing this product
ACDelco Professional Disc Brake Caliper Bushing is a high quality replacement component for your vehicle's disc brake caliper. The disc brake caliper bushing functions to move the caliper back and forth. ⚠
BRAND: ACDelco
FEATURES:
- Buick;Cadillac;Checker;Chevrolet;Chrysler;Dodge;GMC;Isuzu;Jeep;Oldsmobile;Pontiac
- caliper;loaded-caliper;brake-caliper;break-claiper;brake-job;front-brake;rear-brake;cylider;hydraluic;calipar;callypor;dot-3;dot-4;front-brakes;rear-brakes;brake-set;brake-caliper-slider;banjo-bolt;break;bushing;caliper-rebuild-kit
- Front Disc Brake Caliper Rubber Bushing Kit with 2 Boots
- Includes necessary hardware for easy installation
- Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety
- Thoroughly manufactured to meet your expectations for fit, form, and function
SPECIFICS:
| FAQ - Answer 1 | Yes, ACDelco Professional Brake Kits and Hardware come with a 12 month/ unlimited mile warranty. |
| FAQ - Answer 2 | Yes, it is a good idea to inspect your brake fluid often. |
| FAQ - Answer 3 | Yes, both part offerings are high quality replacement parts. |
| FAQ - Question 1 | Are these brake parts durable? |
| FAQ - Question 2 | Do I need to check my brake fluid when replacing other brake parts? |
| FAQ - Question 3 | Can I use ACDelco GM Original Equipment parts with my ACDelco Professional brake parts? |
| Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
| Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
| Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems: |
| Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
| Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
| Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
| Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
| Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
| Height (in) | 1.44 |
| Measurements | 13 X 2 1/2 in |
| Meets or Exceeds Original Equipment Manufacture Specifications | Yes |
| Programming Required | No |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Visible ridges on rotor surface. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Chirping, grinding, or squeaking noises when braking. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Difficulty stopping the vehicle. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | A low or sinking brake pedal. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Brake pedal pulsation (not to be confused with normal ABS operation). |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 6 | Vehicle pulls to the left or right when brakes are applied. |
| Signs of Wear & Troubleshooting - Section 1 - Header | Brake rotor signs of wear include: |
| Weight (lb) | 0.9 |
| Width (in) | 1.63 |
Product type:
Aftermarket
Product Description:
Front Disc Brake Caliper Rubber Bushing Kit with 2 Boots
Material:
Rubber
Programming Required:
No
Color:
Brown
Length (Inch):
3.56
Boot Included:
No
Measurements:
13 X 2 1/2 in
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Includes necessary hardware for easy installation
Features & Benefits - Bullet 3:
Thoroughly manufactured to meet your expectations for fit, form, and function
Features & Benefits - Bullet 1:
Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety
Weight (lb) (Pound):
0.9
Height (in) (Inch):
1.44
Width (in) (Inch):
1.63
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bull:
A low or sinking brake pedal.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Visible ridges on rotor surface.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Difficulty stopping the vehicle.
Life Cycle Status:
Announced
Signs of Wear & Troubleshooting - Section 1 - Bull:
Chirping, grinding, or squeaking noises when braking.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
FAQ - Answer 2:
Yes, it is a good idea to inspect your brake fluid often.
Item Level GTIN:
00707773129012
FAQ - Question 3:
Can I use ACDelco GM Original Equipment parts with my ACDelco Professional brake parts?
FAQ - Question 1:
Are these brake parts durable?
FAQ - Question 2:
Do I need to check my brake fluid when replacing other brake parts?
Signs of Wear & Troubleshooting - Section 1 - Head:
Brake rotor signs of wear include:
FAQ - Answer 1:
Yes, ACDelco Professional Brake Kits and Hardware come with a 12 month/ unlimited mile warranty.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
FAQ - Answer 3:
Yes, both part offerings are high quality replacement parts.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems:
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Lubricant Included:
No
Country of Origin:
China
Weight - Each (Gross Pounds):
00.90
Weight - Case (Gross Pounds):
09.00
Height - Each (Inch):
01.44
Height - Case (Inch):
10.75
Length - Each (Inch):
03.56
Length - Case (Inch):
13.75
Width - Each (Inch):
01.63
Width - Case (Inch):
11.00