×
close
click to zoom in

ACDelco 18P2499 | Rear Right Parking Brake Cable

(No reviews yet) Write a Review
$22.99
Part Number
ACD18P2499
UPC:
707773080276
Condition:
New
5 customers are viewing this product

ACDelco Professional Parking Brake Cable is a high quality replacement component for your vehicle's parking brake system. Each parking brake cable has plastic-coated steel to provide superior corrosion resistance and ensure smooth operation. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Chevrolet;GMC
  • Includes necessary hardware for easy installation
  • OE-style brackets and end fittings provide an easy installation and similar fit to original cables
  • parking-brake;parking-brake-adjuster;-cable;rear-brakes;drum-brakes;brake-shoe;parking-brake-adjuster;parkingbrakecable;parkingbrake;brakecable;brake-cable;breaks
  • Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety
  • Rear Passenger Side Parking Brake Cable Assembly

SPECIFICS:

Cable Diameter (in)0.125
Cable Diameter (mm)3.175
FAQ - Answer 1Yes, ACDelco Professional Brake Kits and Hardware come with a 12 month/ unlimited mile warranty.
FAQ - Answer 2Yes, it is a good idea to inspect your brake fluid often.
FAQ - Answer 3Yes, both part offerings are high quality replacement parts.
FAQ - Question 1Are these brake parts durable?
FAQ - Question 2Do I need to check my brake fluid when replacing other brake parts?
FAQ - Question 3Can I use ACDelco GM Original Equipment parts with my ACDelco Professional brake parts?
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (in)2.06
Length (in)110.3
Length (mm)2800.4
Meets or Exceeds Original Equipment Manufacture SpecificationsYes
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Visible ridges on rotor surface.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Chirping, grinding, or squeaking noises when braking.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bullet 4A low or sinking brake pedal.
Signs of Wear & Troubleshooting - Section 1 - Bullet 5Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bullet 6Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - HeaderBrake rotor signs of wear include:
Weight (lb)0.3
Width (in)9.5

APPLICATIONS:

  • 2002-2004 GMC Sierra 1500 - Position: Rear Right
    • w/ 2 Wheel Steering
  • 2007-2007 GMC Sierra 1500 Classic - Position: Rear Right
  • 1999-2001 Chevrolet Silverado 2500 - Position: Rear Right
  • 2004-2004 Chevrolet Silverado 2500 HD - Position: Rear Right
    • w/o 2" Body Raise w/ 157.5" Wheelbase w/ 143.5" Wheelbase
  • 2005-2005 GMC Sierra 1500 - Position: Rear Right
    • with Hydraulic Brake System with 6400lb GVW
  • 2007-2007 Chevrolet Silverado 1500 Classic - Position: Rear Right
  • 2001-2001 Chevrolet Silverado 2500 HD - Position: Rear Right
    • with 133.0in Wheelbase Except 2" Body Rise
  • 1999-2001 GMC Sierra 2500 - Position: Rear Right
  • 1999-2006 Chevrolet Silverado 1500 - Position: Rear Right
  • 2002-2003 Chevrolet Silverado 2500 HD - Position: Rear Right
    • w/o 2" Body Raise
  • 1999-2006 GMC Sierra 1500 - Position: Rear Right
  • 2001-2001 GMC Sierra 1500 - Position: Rear Right
    • Single Piston Caliper
  • 2002-2004 Chevrolet Silverado 1500 - Position: Rear Right
    • w/ 2 Wheel Steering
  • 2005-2005 Chevrolet Silverado 1500 - Position: Rear Right
    • with 7,200 LB GVW w/ 2 Wheel Steering Vacuum Brake System
  • 2001-2001 Chevrolet Silverado 1500 - Position: Rear Right
    • Single Piston Caliper

Product type:
Aftermarket
Product Description:
Rear Passenger Side Parking Brake Cable Assembly
Universal Or Specific Fit:
Specific
Material:
Steel
Programming Required:
No
Mounting Bracket Included:
Yes
End 2 Type:
Eyelet
End 1 Type:
Fixed Wire Stop
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety
Features & Benefits - Bullet 3:
Includes necessary hardware for easy installation
Features & Benefits - Bullet 1:
OE-style brackets and end fittings provide an easy installation and similar fit to original cables
Weight (lb) (Pound):
0.3
Height (in) (Inch):
2.06
Width (in) (Inch):
9.5
Length (in) (Inch):
110.3
Signs of Wear & Troubleshooting - Section 1 - Bull:
Visible ridges on rotor surface.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Chirping, grinding, or squeaking noises when braking.
Life Cycle Status:
Announced
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Signs of Wear & Troubleshooting - Section 1 - Bull:
A low or sinking brake pedal.
Item Level GTIN:
00707773080276
FAQ - Answer 2:
Yes, it is a good idea to inspect your brake fluid often.
FAQ - Question 3:
Can I use ACDelco GM Original Equipment parts with my ACDelco Professional brake parts?
FAQ - Question 1:
Are these brake parts durable?
FAQ - Question 2:
Do I need to check my brake fluid when replacing other brake parts?
Signs of Wear & Troubleshooting - Section 1 - Head:
Brake rotor signs of wear include:
FAQ - Answer 1:
Yes, ACDelco Professional Brake Kits and Hardware come with a 12 month/ unlimited mile warranty.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
FAQ - Answer 3:
Yes, both part offerings are high quality replacement parts.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems:
Length (mm) (Millimeter):
2800.4
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Jacket Material:
EPDM Rubber
Cable Diameter (in) (Inch):
0.125
Cable Diameter (mm) (Millimeter):
3.175
Jacket Color:
Black
Country of Origin:
China
Weight - Each (Gross Pounds):
00.30
Weight - Case (Gross Pounds):
03.00
Height - Each (Inch):
02.06
Height - Case (Inch):
10.30
Length - Each (Inch):
09.56
Length - Case (Inch):
19.80
Width - Each (Inch):
09.50
Width - Case (Inch):
11.30



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top