×
close
click to zoom in

ACDelco 19330442 | Rack and Pinion Assembly

(No reviews yet) Write a Review
$545.29
Part Number
ACD19330442
UPC:
808709345756
Condition:
New
5 customers are viewing this product

Hydraulic Rack and Pinion Steering Gear Assembly with Inner Tie Rods

BRAND: ACDelco

FEATURES:

  • Axle Seal;Control Arm Ball Joint;Differential Drive;Differential Gear;Differential Seal;Drive Shaft Seal;Half-Shaft;Half-Shaft Seal;Pinion Gear Bearing;Power Cylinder;Power Steering;Rack and Pinion;Steering Angle Sensor;Steering Gasket;Steering Gear;Steering Position Sensor;Steering Pump;Steering Seal;Steering Tie Rod;Steering Tie Rod End;Suspension Control Arm

SPECIFICS:

ACD_Reman_SentenceRemanufactured - Not for sale where imports are restricted.
ACD_RemanDesRemanufactured
ACD_RemanDesc_woNoRemanufactured
AltPA_6712
Bellows ColorBlack
FAQ - A1Yes. Hydraulic power steering systems use a pump to send pressurized fluid to the hydraulic steering gear, where pressurized fluid assists the driver in moving the steering gear. Electric power steering systems do not use fluid; instead, they use an electric motor and sensors to move the steering gear.
FAQ - A2Yes. If there is a power steering pump mounted to your vehicle's engine, or your owner's manual calls for power steering fluid, then your vehicle uses a hydraulic power steering system. If your vehicle's engine does not have a power steering pump or your owner's manual indicates your vehicle does not require power steering fluid, then your vehicle uses an electric power steering system.
FAQ - A3Yes. Uneven tire wear, vehicle pull, or an off center steering wheel may indicate that your vehicle requires an alignment.
FAQ - A4Yes. You will be able to steer your vehicle if the power steering goes out for both hydraulic and electric power steering systems. It will require more effort, especially at lower speeds. If your vehicle has electric power steering, a 'service steering system' light will likely be visible before it is apparent that the power assist is off. If your power steering goes out, have the system inspected and repaired as soon as possible.
FAQ - Q1Is there a difference between a hydraulic and an electric power steering system?
FAQ - Q2Can I tell if my vehicle uses an electric or a hydraulic power steering system?
FAQ - Q3Are there signs that can indicate my vehicle needs an alignment?
FAQ - Q4Will I be able to steer my vehicle if my power steering goes out?
Features & Benefits - B1Converts steering column rotation into side-to-side motion needed to steer wheels
Features & Benefits - B2Remanufacturing is an industry standard practice that returns parts into service rather than scrapping them
Features & Benefits - B3Tested to ensure they perform to GM specifications
Gasket Or Seal IncludedYes
Good Maintenance Practices - S1 B1Unusual noise when turning the steering wheel
Good Maintenance Practices - S1 B2A shimmy or shake in the steering wheel
Good Maintenance Practices - S1 B3Heavy or unresponsive steering at low speeds or during parking lot maneuvers
Good Maintenance Practices - S1 B4Steering wheel not returning to 'center' properly
Good Maintenance Practices - S1 B5Service power steering system light illuminating in the driver information center
Good Maintenance Practices - S1 HHave your vehicle inspected if it exhibits any of the following symptoms:
Good Maintenance Practices - S2 B1Wet spots/fluid stains on the ground beneath the vehicle
Good Maintenance Practices - S2 HFor hydraulic power steering systems:
Good Maintenance Practices - S3 B1Especially have the inner and outer tie rods inspected for grease leaks and excessive lash or 'play'
Good Maintenance Practices - S3 HIf you live in areas that experience harsh winter weather, have the entire steering system inspected before winter arrives.
Grade TypeREGULAR
Height6
Inlet Line Fitting Diameter0.708
Inlet Line Fitting GenderFemale
Length50.12
Marketing Statement - Product LineStay with the parts brand your General Motors vehicle came with and get the quality you know and trust with ACDelco GM Original Equipment Steering and Driveline parts. ACDelco GM OE replacement parts give you the peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Steering and Driveline parts are manufactured for many makes and models of GM car, light duty truck, and sport utility vehicle.
Mkt_State_Warranty_CA36 Months/60,000 KM (Parts Only). Please see ACDelcocanada.com for more details.
Mkt_State_Warranty_US24 Month / Unlimited Mile Limited Warranty (Parts Only). Please see ACDelco.com for more details.
Mounting Brackets IncludedYES
Mounting Hardware IncludedNo
Outer Tie Rods IncludedNo
Outlet Line Fitting Diameter0.629
Outlet Line Fitting GenderFemale
Product DescriptionACDelco GM Original Equipment Remanufactured Rack and Pinion Assemblies convert the rotation of your vehicle's steering column to the side-to-side motion needed to steer its front or rear wheels, and are GM-recommended replacements for your vehicle's original components. Remanufacturing rack and pinion assemblies is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing helps return components back into service rather than processing as scrap or simply disposing of them. These rack and pinion assemblies will provide the same performance, durability, and service life you expect from ACDelco.
Programming RequiredNO
Signs of Wear & Troubleshooting - S1 B1Excessive 'play' in the steering wheel
Signs of Wear & Troubleshooting - S1 B2Unusual noises from the assembly or related components
Signs of Wear & Troubleshooting - S1 B3Undue movement or 'lash'
Signs of Wear & Troubleshooting - S1 HSigns of wear for rack and pinion assemblies include but are not limited to:
Steering Input Shaft Diameter0.510
Vintage_Part_IndicatorN
Weight18.95
Width10.88

DOWNLOADS:

APPLICATIONS:

  • 2001-2005 Pontiac Aztek
  • 2002-2006 Buick Rendezvous

Product type:
Aftermarket
Product Description:
Hydraulic Rack and Pinion Steering Gear Assembly with Inner Tie Rods
Grade Type:
Regular
Mounting Hardware Included:
No
Programming Required:
No
Gasket Or Seal Included:
Yes
Mounting Brackets Included:
Yes
Bellows Color:
Black
Outer Tie Rods Included:
No
Outlet Line Fitting Gender:
Female
Inlet Line Fitting Gender:
Female
Inlet Line Fitting Diameter (Inch):
0.708
Outlet Line Fitting Diameter (Inch):
0.629
Steering Input Shaft Diameter (Inch):
0.510
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 1:
Converts steering column rotation into side-to-side motion needed to steer wheels
Weight (lb) (Pound):
18.95
Height (in) (Inch):
6
Width (in) (Inch):
10.88
Length (in) (Inch):
50.12
Life Cycle Status:
Discontinued
FAQ - Question 4:
Will I be able to steer my vehicle if my power steering goes out?
Life Cycle Status Description:
Discontinued - Part is being removed from the product line.
FAQ - Question 3:
Are there signs that can indicate my vehicle needs an alignment?
Item Level GTIN:
00808709345756
FAQ - Question 1:
Is there a difference between a hydraulic and an electric power steering system?
FAQ - Question 2:
Can I tell if my vehicle uses an electric or a hydraulic power steering system?
Good Maintenance Practices - Section 1 - Bullet 1:
Unusual noise when turning the steering wheel
Good Maintenance Practices - Section 1 - Bullet 2:
A shimmy or shake in the steering wheel
Good Maintenance Practices - Section 1 - Bullet 3:
Heavy or unresponsive steering at low speeds or during parking lot maneuvers
Good Maintenance Practices - Section 1 - Bullet 4:
Steering wheel not returning to 'center' properly
FAQ - Answer 3:
Yes. Uneven tire wear, vehicle pull, or an off center steering wheel may indicate that your vehicle requires an alignment.
Good Maintenance Practices - Section 1 - Bullet 5:
Service power steering system light illuminating in the driver information center
Good Maintenance Practices - Section 1 - Header:
Have your vehicle inspected if it exhibits any of the following symptoms:
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Good Maintenance Practices - Section 2 - Bullet 1:
Wet spots/fluid stains on the ground beneath the vehicle
Good Maintenance Practices - Section 3 - Bullet 1:
Especially have the inner and outer tie rods inspected for grease leaks and excessive lash or 'play'
Good Maintenance Practices - Section 2 - Header:
For hydraulic power steering systems:
Mount Hole Quantity:
2
Good Maintenance Practices - Section 3 - Header:
If you live in areas that experience harsh winter weather, have the entire steering system inspected before winter arrives.
Country of Origin:
United States
Weight - Each (Gross Pounds):
18.95
Height - Each (Inch):
06.00
Length - Each (Inch):
50.12
Width - Each (Inch):
10.88



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top