×
close
click to zoom in

ACDelco 19330484 | Steering Gear

(No reviews yet) Write a Review
$580.99
Part Number
ACD19330484
UPC:
808709346166
Condition:
New
5 customers are viewing this product

Steering Gear Assembly with Nut, Washer, and Seals

BRAND: ACDelco

FEATURES:

  • Axle Seal;Control Arm Ball Joint;Differential Drive;Differential Gear;Differential Seal;Drive Shaft Seal;Half-Shaft;Half-Shaft Seal;Pinion Gear Bearing;Power Cylinder;Power Steering;Rack and Pinion;Steering Angle Sensor;Steering Gasket;Steering Gear;Steering Position Sensor;Steering Pump;Steering Seal;Steering Tie Rod;Steering Tie Rod End;Suspension Control Arm

SPECIFICS:

ACD_Reman_SentenceRemanufactured - Not for sale where imports are restricted.
ACD_RemanDesRemanufactured
ACD_RemanDesc_woNoRemanufactured
AltPA_2313_mm31.75
AltPA_465_mm16.76
AltPA_6524_mm18.00
AltPA_6525_mm16.00
FAQ - A1Yes. Hydraulic power steering systems use a pump to send pressurized fluid to the hydraulic steering gear, where pressurized fluid assists the driver to move the steering gear. Electric power steering systems do not use fluid; instead, they use an electric motor and sensors to move the steering gear.
FAQ - A2Yes. If there is a power steering pump mounted to your vehicle's engine, or your owner's manual calls for power steering fluid, then your vehicle uses a hydraulic power steering system. If your vehicle's engine does not have a power steering pump or your owner's manual indicates your vehicle does not require power steering fluid, then your vehicle uses an electric power steering system.
FAQ - A3Yes. Uneven tire wear, vehicle pull, or an off center steering wheel may indicate that your vehicle requires an alignment.
FAQ - A4Yes. You will be able to steer your vehicle if the power steering goes out for both hydraulic and electric power steering systems. It will require more effort, especially at lower speeds. If your vehicle has electric power steering, a 'service steering system' light will likely be apparent before it is realized that the power assist is off. If your power steering goes out, have the system inspected and repaired as soon as possible.
FAQ - Q1Is there a difference between a hydraulic and an electric power steering system?
FAQ - Q2Can I tell if my vehicle uses an electric or a hydraulic power steering system?
FAQ - Q3Are there signs that can indicate my vehicle needs an alignment?
FAQ - Q4Will I be able to steer my vehicle if my power steering goes out?
Features & Benefits - B1Converts steering wheel rotation into side-to-side motion needed to steer front wheels
Features & Benefits - B2Remanufacturing is an industry standard practice that returns parts into service rather than scrapping them
Features & Benefits - B3Tested to ensure they perform to GM specifications
Good Maintenance Practices - S1 B1Unusual noise when turning the steering wheel
Good Maintenance Practices - S1 B2A shimmy or shake in the steering wheel
Good Maintenance Practices - S1 B3Heavy or unresponsive steering at low speeds or during parking lot maneuvers
Good Maintenance Practices - S1 B4Steering wheel not returning to 'center' properly
Good Maintenance Practices - S1 B5Service power steering system light illuminating in the driver information center
Good Maintenance Practices - S1 HHave your vehicle inspected if it exhibits any of the following symptoms:
Good Maintenance Practices - S2 B1Check your power steering fluid levels and belts and hoses.
Good Maintenance Practices - S2 B2Wet spots/fluid stains on the ground beneath the vehicle.
Good Maintenance Practices - S2 HFor hydraulic power steering systems:
Good Maintenance Practices - S3 B1Especially have the inner and outer tie rods inspected for grease leaks and excessive lash or 'play'
Good Maintenance Practices - S3 HIf you live in areas that experience harsh winter weather, have the entire steering system inspected before winter arrives.
Height8.2
Input Shaft Diameter0.660
Length15
Marketing Statement - Product LineStay with the parts brand your General Motors vehicle came with and get the quality you know and trust with ACDelco GM Original Equipment Steering and Driveline parts. ACDelco GM OE replacement parts give you the peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Steering and Driveline parts are manufactured for many makes and models of GM car, light duty truck, and sport utility vehicle.
Mkt_State_Warranty_CA36 Months/60,000 KM (Parts Only). Please see ACDelcocanada.com for more details.
Mkt_State_Warranty_US24 Month / Unlimited Mile Limited Warranty (Parts Only). Please see ACDelco.com for more details.
Output Shaft Diameter1.250
Output Shaft Spline Quantity32
Port 1 Thread Diameter0.709
Port 2 Thread Diameter0.630
Power AssistedYes
Product DescriptionACDelco GM Original Equipment Remanufactured Steering Gears convert steering wheel rotation into the side-to-side motion needed to steer your vehicle's front wheels, and are GM-recommended replacements for your vehicle's original components. Remanufacturing steering gears is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing helps return components back into service rather than processing as scrap or simply disposing of them. These steering gears will provide the same performance, durability, and service life you expect from ACDelco.
Programming RequiredNO
Signs of Wear & Troubleshooting - S1 B1Excessive 'play' in the steering wheel
Signs of Wear & Troubleshooting - S1 B2Unusual noises from the steering gear or related components, such as the EPS rack or pinion steering gear motor
Signs of Wear & Troubleshooting - S1 B3Undue movement, or 'lash', in the outer and inner tie rods
Signs of Wear & Troubleshooting - S1 HSigns of wear for steering gears include but are not limited to:
Total Turns Lock To Lock3
Vintage_Part_IndicatorN
Weight30.34
Width11.5

8,500 LB GVWR(C5F), 8600 LBS / 3900 KG GVWR(C6P)

DOWNLOADS:

APPLICATIONS:

  • 2003-2006 GMC Savana 2500
  • 2003-2006 Chevrolet Express 2500
  • 2003-2006 Chevrolet Express 3500
  • 2003-2006 GMC Savana 3500

Product type:
Aftermarket
Product Description:
Steering Gear Assembly with Nut, Washer, and Seals
Programming Required:
No
Total Turns Lock To Lock:
3
Power Assisted:
Yes
Output Shaft Spline Quantity:
32
Output Shaft Diameter (Inch):
1.250
Input Shaft Diameter (Inch):
0.660
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 1:
Converts steering wheel rotation into side-to-side motion needed to steer front wheels
Weight (lb) (Pound):
30.34
Height (in) (Inch):
8.2
Width (in) (Inch):
11.5
Length (in) (Inch):
15
FAQ - Question 4:
Will I be able to steer my vehicle if my power steering goes out?
FAQ - Question 3:
Are there signs that can indicate my vehicle needs an alignment?
FAQ - Question 1:
Is there a difference between a hydraulic and an electric power steering system?
FAQ - Question 2:
Can I tell if my vehicle uses an electric or a hydraulic power steering system?
Good Maintenance Practices - Section 1 - Bullet 1:
Unusual noise when turning the steering wheel
Good Maintenance Practices - Section 1 - Bullet 2:
A shimmy or shake in the steering wheel
Life Cycle Status:
Announced
Good Maintenance Practices - Section 1 - Bullet 3:
Heavy or unresponsive steering at low speeds or during parking lot maneuvers
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Good Maintenance Practices - Section 1 - Bullet 4:
Steering wheel not returning to 'center' properly
Item Level GTIN:
00808709346166
FAQ - Answer 3:
Yes. Uneven tire wear, vehicle pull, or an off center steering wheel may indicate that your vehicle requires an alignment.
Good Maintenance Practices - Section 1 - Bullet 5:
Service power steering system light illuminating in the driver information center
Good Maintenance Practices - Section 1 - Header:
Have your vehicle inspected if it exhibits any of the following symptoms:
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Good Maintenance Practices - Section 2 - Bullet 1:
Check your power steering fluid levels and belts and hoses.
Good Maintenance Practices - Section 2 - Bullet 2:
Wet spots/fluid stains on the ground beneath the vehicle.
Good Maintenance Practices - Section 3 - Bullet 1:
Especially have the inner and outer tie rods inspected for grease leaks and excessive lash or 'play'
Good Maintenance Practices - Section 2 - Header:
For hydraulic power steering systems:
Good Maintenance Practices - Section 3 - Header:
If you live in areas that experience harsh winter weather, have the entire steering system inspected before winter arrives.
Port 1 Thread Diameter (in) (Inch):
0.709
Port 2 Thread Diameter (in) (Inch):
0.630
Port 1 Thread Diameter (mm) (Millimeter):
18.00
Port 2 Thread Diameter (mm) (Millimeter):
16.00
Input Shaft Diameter (Millimeter):
16.76
Output Shaft Diameter (Millimeter):
31.75
Country of Origin:
United States
Weight - Each (Gross Pounds):
30.34
Height - Each (Inch):
08.20
Length - Each (Inch):
15.00
Width - Each (Inch):
11.50



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top