×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
ACDelco 19366767 | Front Left Brake Hydraulic Hose
click to zoom in

ACDelco 19366767 | Front Left Brake Hydraulic Hose

(No reviews yet) Write a Review
$39.09
Part Number
ACD19366767
UPC:
808709694816
Condition:
New
5 customers are viewing this product

video gallery

Description

ACDelco GM Original Equipment Brake Hydraulic Hoses are quality reinforced hoses that carry fluid to transmit force within the brake system, and are GM-recommended replacements for your vehicle's original components. Brake lines and hoses are designed to withstand high pressures, and these brake hydraulic hoses have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Chevrolet|Chevrolet|GMC|GMC
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Manufactured with GM Original Equipment specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE

SPECIFICS:

Bracket IncludedNo
End 1 Fitting MaterialSteel
End 1 Fitting TypeFemale
End 1 Thread Diameter (in)0.375
End 1 TypeInverted
End 2 Fitting Inside Diameter10
End 2 Fitting MaterialSteel
End 2 Fitting TypeBanjo
Gasket Or Seal IncludedYes
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (in)0.9
Length (in)25.8
Mounting Hardware IncludedNo
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Chirping or grinding noises when braking.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3A low or sinking brake pedal.
Signs of Wear & Troubleshooting - Section 1 - Bullet 4Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bullet 5Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - HeaderGeneral brake signs of wear include:
Weight (lb)0.33
Width (in)1

15,000 LBS GVWR(C5B)

APPLICATIONS:

  • 1990-1990 Chevrolet C3500 - Position: Front Left
  • 1990-1990 GMC C3500 - Position: Front Left
  • 1991-2002 Chevrolet C3500HD - Position: Front Left
  • 1991-2002 GMC C3500HD - Position: Front Left

Attributes
Product type:
Aftermarket
Product Description:
Front Driver Side Hydraulic Brake Hose Assembly
Mounting Hardware Included:
No
Programming Required:
No
Gasket Or Seal Included:
Yes
Axis 1 Length (Inch):
25.06
End 1 Type:
Inverted
End 2 Fitting Type:
Banjo
Bracket Included:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Offering the quality, reliability, and durability of GM OE
Features & Benefits - Bullet 3:
Manufactured with GM Original Equipment specification for fit, form, and function
Features & Benefits - Bullet 1:
GM-recommended replacement part for your GM vehicle's original factory component
Weight (lb) (Pound):
0.33
Height (in) (Inch):
0.9
Width (in) (Inch):
1
Length (in) (Inch):
25.8
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Life Cycle Status:
Discontinued
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Life Cycle Status Description:
Discontinued - Part is being removed from the product line.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Item Level GTIN:
00808709694816
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
End 1 Thread Diameter (in) (Inch):
0.375
End 1 Fitting Type:
Female
Axis 1 Length (Millimeter):
636.4
End 1 Fitting Material:
Steel
End 2 Fitting Material:
Steel
End 2 Fitting Inside Diameter:
10
Country of Origin:
United States
Weight - Each (Gross Pounds):
00.33
Height - Each (Inch):
00.90
Length - Each (Inch):
25.80
Width - Each (Inch):
01.00



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top