×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
ACDelco 19420964 | Brake Master Cylinder
click to zoom in

ACDelco 19420964 | Brake Master Cylinder

(No reviews yet) Write a Review
$169.99
Part Number
ACD19420964
UPC:
193468824117
Condition:
New
5 customers are viewing this product

video gallery

Description

Brake Master Cylinder

BRAND: ACDelco

FEATURES:

  • Brake Master Cylinder

SPECIFICS:

ACD_RemanDesNo
Bleeder Hoses IncludedNo
Brake Booster IncludedNo
Dust Boot IncludedNO
Features & Benefits - B1Pressure tested to ensure safe and confident braking
Features & Benefits - B2Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality
Features & Benefits - B3GM-recommended replacement part for your GM vehicle's original factory component
Features & Benefits - B4Offering the quality, reliability, and durability of GM OE
Features & Benefits - B5Manufactured with GM Original Equipment specification for fit, form, and function
Gasket Or Seal IncludedNo
Good Maintenance Practices - S1 B1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - S1 B2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - S1 B3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - S1 B4Check the thickness of your brake pads.
Good Maintenance Practices - S1 HThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - S2 B1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - S2 B2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - S2 B3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - S2 B4Parking brake adjustments (as needed).
Good Maintenance Practices - S2 HThe following should be conducted by a qualified technician:
Height8.9
Length10.3
Master Cylinder Bore Diameter1.28
Master Cylinder Cap IncludedYes
Mkt_State_Warranty_CA12 Months/20,000 KM (Parts Only). Please see ACDelcocanada.com for more details.
Mkt_State_Warranty_US24 Month / Unlimited Mile Limited Warranty (Parts Only). Please see ACDelco.com for more details.
Mounting Bracket IncludedNo
Mounting Hardware IncludedNo
Mounting Hole Quantity2
PAdb Update Date2020-11-24
Piston Quantity2
Port Quantity2
Primary Outlet Thread Diameter0.43
Product DescriptionACDelco GM Original Equipment Brake Master Cylinder is a hydraulic pump mounted to the brake booster and contains a reservoir that holds brake fluid. This original equipment brake master cylinder has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Push Rod IncludedNo
Reservoir IncludedYes
Reservoir MaterialPlastic
Reservoir TypeDual
Secondary Outlet Thread Diameter0.43
Sensor IncludedYES
Signs of Wear & Troubleshooting - S1 B1Brake warning light is on.
Signs of Wear & Troubleshooting - S1 B2Fluid spots beneath the car, indicating there may be a leak within the cylinder.
Signs of Wear & Troubleshooting - S1 B3Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - S1 B4A low or sinking brake pedal.
Signs of Wear & Troubleshooting - S1 HBrake cylinder signs of wear include:
Vintage_Part_IndicatorN
Weight3.13
Width5.5

DOWNLOADS:

Attributes
Product type:
Aftermarket
Brand Description:
Brake Master Cylinder
Mounting Hardware Included:
No
Mounting Bracket Included:
No
Mounting Hole Quantity:
2
Port Quantity:
2
Gasket Or Seal Included:
No
Dust Boot Included:
No
Reservoir Included:
Yes
Sensor Included:
Yes
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality
Features & Benefits - Bullet 4:
Offering the quality, reliability, and durability of GM OE
Features & Benefits - Bullet 3:
GM-recommended replacement part for your GM vehicle's original factory component
Features & Benefits - Bullet 1:
Pressure tested to ensure safe and confident braking
Weight (lb) (Pound):
3.13
Height (in) (Inch):
8.9
Width (in) (Inch):
5.5
Length (in) (Inch):
10.3
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake warning light is on.
Life Cycle Status:
Announced
Signs of Wear & Troubleshooting - Section 1 - Bull:
A low or sinking brake pedal.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Fluid spots beneath the car, indicating there may be a leak within the cylinder.
Item Level GTIN:
00193468824117
Signs of Wear & Troubleshooting - Section 1 - Bull:
Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Head:
Brake cylinder signs of wear include:
Features & Benefits - Bullet 5:
Manufactured with GM Original Equipment specification for fit, form, and function
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Piston Quantity:
2
Pushrod Included:
No
Master Cylinder Cap Included:
Yes
Brake Booster Included:
No
Bleeder Hoses Included:
No
Primary Outlet Thread Diameter (Inch):
0.43
Master Cylinder Bore Diameter (Inch):
1.28
Secondary Outlet Thread Diameter (Inch):
0.43
Primary Outlet Thread Diameter (Millimeter):
11.04
Secondary Outlet Thread Diameter (Millimeter):
11.04
Master Cylinder Bore Diameter (Millimeter):
32.54
Reservoir Material:
Plastic
Reservoir Type:
Dual
Country of Origin:
Mexico
Weight - Each (Gross Pounds):
03.13
Height - Each (Inch):
08.90
Length - Each (Inch):
10.30
Width - Each (Inch):
05.50



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top