×
close
click to zoom in

ACDelco 45A7009 | Left Rack and Pinion Bellows Kit

(No reviews yet) Write a Review
$28.99
Part Number
ACD45A7009
UPC:
21625334271
Condition:
New
5 customers are viewing this product

ACDelco Professional, premium aftermarket Rack and Pinion Bellow Kits are a high quality replacement for many vehicles on the road today. These bellow kits are installed on each side of your vehicle's rack and pinion steering system, helping protect the rack from exposure to water, debris, and other potentially damaging contaminants. These premium aftermarket replacement kits meet the performance standards you would expect from ACDelco. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Engineered to meet your expectations for fit, form, and function
  • Premium, high-quality aftermarket component
  • Provides the performance and dependability you expect from ACDelco

SPECIFICS:

ACD_RemanDesNo
FAQ - A1No. The CV boot is housed on the axle and prevents grease from leaking out of the CV Joint. The bellows boot is housed on the steering rack and prevents dirt from getting into the steering rack and pinion system.
FAQ - A2No. The boot does not need to be removed, but the clamp securing the bellows to the inner tie rod shaft will need to be loosened to prevent the bellows boot from twisting when the tie rod shaft is turned to adjust the vehicle toe in or toe out specs.
FAQ - Q1Are a CV boot and Rack and Pinion Bellows the same part?
FAQ - Q2Does the bellows boot need to be removed in order to turn the inner tie rod during an alignment procedure?
Good Maintenance Practices - S1 B1Inspect or have your bellows inspected for signs of wear. Exposure to harsh conditions such as uneven terrain, severe weather, or large temperature changes can all take their toll on the integrity of your rack and pinion bellows, causing wear and even failure. As your bellows wear, your vehicle's steering system is exposed to water and other contaminants from the road, leading to water and dirt accumulation and degradation of the system.
Good Maintenance Practices - S1 B2Inspect your rack and pinion bellows to help detect wear before it becomes a major problem.
Good Maintenance Practices - S1 B3Installing new steering rack bellows can interfere with the alignment of your vehicle. Perform a full four-wheel vehicle alignment after any rack and pinion bellow replacement.
Marketing Statement - Product LineACDelco offers a full line of Professional, premium aftermarket Chassis Parts to help keep vehicles riding and handling feeling like new. With competitive limited lifetime warranty (see seller for limited warranty details) coverage and products covering all major chassis systems and alignment products for many vehicles on the road today, it's no wonder the pros rely on ACDelco Professional, premium aftermarket Chassis Parts.
Mkt_State_Warranty_CALimited Lifetime Warranty as long as original purchaser still owns vehicle (Parts Only).
Mkt_State_Warranty_USLimited Lifetime Warranty (Parts Only). Please see ACDelco.com for more details.
Signs of Wear & Troubleshooting - S1 B1Visible component wear: cracks, cuts, or gouges in your vehicle's bellows are all signs that you should consider replacing your vehicle's rack and pinion bellows
Signs of Wear & Troubleshooting - S1 HSigns of wear include but are not limited to:
Vintage_Part_IndicatorN

DOWNLOADS:

APPLICATIONS:

  • 1981-1989 Plymouth Reliant - Position: N/A
  • 2001-2005 Buick Park Avenue - Position: N/A
  • 2005-2009 Buick LaCrosse - Position: N/A
  • 1990-1996 Oldsmobile Silhouette - Position: N/A
  • 1985-1993 Cadillac Commercial Chassis - Position: N/A
  • 1989-1989 Hyundai Sonata - Position: N/A
    • From 11/89
  • 1987-1990 Dodge Shadow - Position: N/A
  • 1982-1984 Oldsmobile Omega - Position: N/A
  • 1987-2005 Pontiac Bonneville - Position: N/A
  • 2005-2009 Buick Allure - Position: N/A
  • 1995-2005 Chevrolet Cavalier - Position: N/A
  • 1983-1984 Chrysler Executive Sedan - Position: N/A
  • 1986-1992 Oldsmobile Toronado - Position: N/A
  • 1982-1991 Pontiac 6000 - Position: N/A
  • 1984-1993 Dodge Daytona - Position: N/A
  • 1987-1990 Plymouth Sundance - Position: N/A
  • 1995-1999 Oldsmobile Aurora - Position: N/A
  • 1986-1991 Oldsmobile Delta 88 - Position: N/A
  • 1985-1990 Buick Electra - Position: N/A
  • 1999-2004 Oldsmobile Alero - Position: N/A
  • 1986-1993 Buick Riviera - Position: N/A
  • 1981-1987 Pontiac T1000 - Position: N/A
  • 1983-1986 Plymouth Horizon - Position: N/A
  • 1983-1983 Plymouth Scamp - Position: Left
  • 1995-1996 Buick Riviera - Position: N/A
  • 1982-1990 Chevrolet Celebrity - Position: N/A
  • 1985-1996 Oldsmobile 98 - Position: N/A
  • 1986-2000 Buick LeSabre - Position: N/A
  • 1983-1987 Plymouth Turismo - Position: N/A
  • 1985-1999 Cadillac DeVille - Position: N/A
  • 2004-2005 Chevrolet Classic - Position: N/A
  • 1987-1994 Oldsmobile Cutlass Cruiser - Position: N/A
  • 1982-1983 Dodge 400 - Position: N/A
  • 1995-2005 Pontiac Sunfire - Position: N/A
  • 1988-2004 Buick Regal - Position: N/A
  • 1982-1985 Buick Skylark - Position: N/A
  • 1985-1989 Dodge Lancer - Position: N/A
  • 1988-1997 Oldsmobile Cutlass Supreme - Position: N/A
  • 1984-1986 Chrysler Laser - Position: N/A
  • 1988-1991 Chrysler Daytona - Position: N/A
  • 1991-1996 Buick Park Avenue - Position: N/A
  • 1983-1986 Plymouth Turismo 2.2 - Position: N/A
  • 1982-1996 Oldsmobile Cutlass Ciera - Position: N/A
  • 1990-1996 Chevrolet Lumina APV - Position: N/A
  • 2000-2013 Chevrolet Impala - Position: N/A
  • 1984-1985 Chevrolet Citation II - Position: N/A
  • 1985-1985 Chrysler Executive Limousine - Position: N/A
  • 1985-1986 Chrysler Town & Country - Position: N/A
  • 1981-1987 Chevrolet Chevette - Position: N/A
  • 1982-2005 Buick Century - Position: N/A
  • 1990-1996 Pontiac Trans Sport - Position: N/A
  • 1995-2007 Chevrolet Monte Carlo - Position: N/A
  • 1986-1999 Cadillac Seville - Position: N/A
  • 1998-2002 Oldsmobile Intrigue - Position: N/A
  • 2001-2002 Oldsmobile Aurora - Position: N/A
  • 1992-1999 Oldsmobile 88 - Position: N/A
  • 1997-1998 Oldsmobile Regency - Position: N/A
  • 1985-1992 Cadillac Fleetwood - Position: N/A
  • 1975-1980 American Motors Pacer - Position: N/A
  • 1997-1999 Oldsmobile Cutlass - Position: N/A
  • 1983-1989 Chrysler New Yorker - Position: N/A
  • 1988-1991 Buick Reatta - Position: N/A
  • 1988-2008 Pontiac Grand Prix - Position: N/A
  • 1992-1994 Mazda MX-3 - Position: N/A
  • 1983-1990 Dodge Omni - Position: N/A
  • 1987-1987 Plymouth Horizon - Position: Left
  • 1997-2003 Chevrolet Malibu - Position: N/A
  • 1985-1986 Plymouth Caravelle - Position: N/A
  • 1982-1984 Pontiac Phoenix - Position: N/A
  • 1996-1999 Oldsmobile LSS - Position: N/A
  • 1991-1991 Hyundai Scoupe - Position: N/A
    • From 6/15/91
  • 2014-2016 Chevrolet Impala Limited - Position: N/A
  • 1990-2001 Chevrolet Lumina - Position: N/A
  • 1986-2002 Cadillac Eldorado - Position: N/A
  • 1982-1984 Dodge Rampage - Position: Left
  • 1981-1989 Dodge Aries - Position: N/A
  • 1983-1984 Chrysler E Class - Position: Left
  • 1982-1986 Chrysler LeBaron - Position: N/A
  • 1983-1987 Dodge Charger - Position: N/A
  • 1982-1982 Chrysler Town & Country - Position: N/A
  • 1993-1993 Cadillac 60 Special - Position: N/A
  • 1991-1992 Hyundai Scoupe - Position: N/A
  • 1993-2002 Mercury Villager - Position: N/A
  • 1983-1988 Dodge 600 - Position: N/A
  • 1999-2005 Pontiac Grand Am - Position: N/A
  • 1990-1994 Hyundai Sonata - Position: N/A
  • 1982-1983 Chevrolet Citation - Position: N/A
  • 1987-1993 Cadillac Allante - Position: N/A

Product type:
Aftermarket
Brand Description:
Rack and Pinion Boot Kit
Product Description:
Rack and Pinion Boot Kit with Boot and Zip Ties
Grade Type:
Regular
Universal Or Specific Fit:
Specific
Mounting Hardware Included:
Yes
Material:
Nitrile Blend Rubber
Programming Required:
No
Color:
Black
Clamps Included:
Yes
Glue Included:
No
Rib Quantity:
10
Grease Included:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Engineered to meet your expectations for fit, form, and function
Features & Benefits - Bullet 3:
Provides the performance and dependability you expect from ACDelco
Features & Benefits - Bullet 1:
Premium, high-quality aftermarket component
Weight (lb) (Pound):
0.4
Height (in) (Inch):
3
Width (in) (Inch):
4
Length (in) (Inch):
10.7
Life Cycle Status:
Announced
FAQ - Answer 2:
No. The boot does not need to be removed, but the clamp securing the bellows to the inner tie rod shaft will need to be loosened to prevent the bellows boot from twisting when the tie rod shaft is turned to adjust the vehicle toe in or toe out specs.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
FAQ - Question 1:
Are a CV boot and Rack and Pinion Bellows the same part?
Item Level GTIN:
00021625334271
FAQ - Question 2:
Does the bellows boot need to be removed in order to turn the inner tie rod during an alignment procedure?
FAQ - Answer 1:
No. The CV boot is housed on the axle and prevents grease from leaking out of the CV Joint. The bellows boot is housed on the steering rack and prevents dirt from getting into the steering rack and pinion system.
Good Maintenance Practices - Section 1 - Bullet 2:
Inspect your rack and pinion bellows to help detect wear before it becomes a major problem.
Good Maintenance Practices - Section 1 - Bullet 3:
Installing new steering rack bellows can interfere with the alignment of your vehicle. Perform a full four-wheel vehicle alignment after any rack and pinion bellow replacement.
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Country of Origin:
Taiwan
Weight - Each (Gross Pounds):
00.40
Weight - Case (Gross Pounds):
04.80
Height - Each (Inch):
03.00
Height - Case (Inch):
11.10
Length - Each (Inch):
10.70
Length - Case (Inch):
12.00
Width - Each (Inch):
04.00
Width - Case (Inch):
11.80



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top