×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
ACDelco 45A7080 | Right Rack and Pinion Bellows Kit
click to zoom in

ACDelco 45A7080 | Right Rack and Pinion Bellows Kit

(No reviews yet) Write a Review
$15.99
Part Number
ACD45A7080
UPC:
21625334974
Condition:
New
5 customers are viewing this product

video gallery

Description

ACDelco Professional, premium aftermarket Rack and Pinion Bellow Kits are a high quality replacement for many vehicles on the road today. These bellow kits are installed on each side of your vehicle's rack and pinion steering system, helping protect the rack from exposure to water, debris, and other potentially damaging contaminants. These premium aftermarket replacement kits meet the performance standards you would expect from ACDelco. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Engineered to meet your expectations for fit, form, and function
  • Premium, high-quality aftermarket component
  • Provides the performance and dependability you expect from ACDelco

SPECIFICS:

ACD_RemanDesNo
FAQ - A1No. The CV boot is housed on the axle and prevents grease from leaking out of the CV Joint. The bellows boot is housed on the steering rack and prevents dirt from getting into the steering rack and pinion system.
FAQ - A2No. The boot does not need to be removed, but the clamp securing the bellows to the inner tie rod shaft will need to be loosened to prevent the bellows boot from twisting when the tie rod shaft is turned to adjust the vehicle toe in or toe out specs.
FAQ - Q1Are a CV boot and Rack and Pinion Bellows the same part?
FAQ - Q2Does the bellows boot need to be removed in order to turn the inner tie rod during an alignment procedure?
Good Maintenance Practices - S1 B1Inspect or have your bellows inspected for signs of wear. Exposure to harsh conditions such as uneven terrain, severe weather, or large temperature changes can all take their toll on the integrity of your rack and pinion bellows, causing wear and even failure. As your bellows wear, your vehicle's steering system is exposed to water and other contaminants from the road, leading to water and dirt accumulation and degradation of the system.
Good Maintenance Practices - S1 B2Inspect your rack and pinion bellows to help detect wear before it becomes a major problem.
Good Maintenance Practices - S1 B3Installing new steering rack bellows can interfere with the alignment of your vehicle. Perform a full four-wheel vehicle alignment after any rack and pinion bellow replacement.
Marketing Statement - Product LineACDelco offers a full line of Professional, premium aftermarket Chassis Parts to help keep vehicles riding and handling feeling like new. With competitive limited lifetime warranty (see seller for limited warranty details) coverage and products covering all major chassis systems and alignment products for many vehicles on the road today, it's no wonder the pros rely on ACDelco Professional, premium aftermarket Chassis Parts.
Mkt_State_Warranty_CALimited Lifetime Warranty as long as original purchaser still owns vehicle (Parts Only).
Mkt_State_Warranty_USLimited Lifetime Warranty (Parts Only). Please see ACDelco.com for more details.
Signs of Wear & Troubleshooting - S1 B1Visible component wear: cracks, cuts, or gouges in your vehicle's bellows are all signs that you should consider replacing your vehicle's rack and pinion bellows
Signs of Wear & Troubleshooting - S1 HSigns of wear include but are not limited to:
Vintage_Part_IndicatorN

APPLICATIONS:

  • 1995-1997 Honda Odyssey - Position: Right
  • 1992-2001 Honda Prelude - Position: Right
  • 1997-2001 Honda CR-V - Position: Left
  • 1994-1997 Honda Accord - Position: Right
  • 1996-1999 Isuzu Oasis - Position: Right
  • 1996-2000 Honda Civic - Position: Right
  • 1995-1998 Acura TL - Position: Right
  • 1997-1999 Acura CL - Position: Right

Attributes
Product type:
Aftermarket
Product Description:
Rack and Pinion Boot Kit with Boot and Zip Ties
Grade Type:
Regular
Universal Or Specific Fit:
Specific
Mounting Hardware Included:
Yes
Material:
Nitrile Blend Rubber
Programming Required:
No
Color:
Black
Glue Included:
No
Rib Quantity:
10
Grease Included:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Engineered to meet your expectations for fit, form, and function
Features & Benefits - Bullet 3:
Provides the performance and dependability you expect from ACDelco
Features & Benefits - Bullet 1:
Premium, high-quality aftermarket component
Signs of Wear & Troubleshooting - Section 1 - Bull:
Visible component wear: cracks, cuts, or gouges in your vehicle's bellows are all signs that you should consider replacing your vehicle's rack and pinion bellows
FAQ - Answer 2:
No. The boot does not need to be removed, but the clamp securing the bellows to the inner tie rod shaft will need to be loosened to prevent the bellows boot from twisting when the tie rod shaft is turned to adjust the vehicle toe in or toe out specs.
FAQ - Question 1:
Are a CV boot and Rack and Pinion Bellows the same part?
FAQ - Question 2:
Does the bellows boot need to be removed in order to turn the inner tie rod during an alignment procedure?
Signs of Wear & Troubleshooting - Section 1 - Head:
Signs of wear include but are not limited to:
Life Cycle Status:
Announced
FAQ - Answer 1:
No. The CV boot is housed on the axle and prevents grease from leaking out of the CV Joint. The bellows boot is housed on the steering rack and prevents dirt from getting into the steering rack and pinion system.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Good Maintenance Practices - Section 1 - Bullet 2:
Inspect your rack and pinion bellows to help detect wear before it becomes a major problem.
Item Level GTIN:
00021625334974
Good Maintenance Practices - Section 1 - Bullet 3:
Installing new steering rack bellows can interfere with the alignment of your vehicle. Perform a full four-wheel vehicle alignment after any rack and pinion bellow replacement.
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Country of Origin:
Taiwan
Weight - Each (Gross Pounds):
00.40
Weight - Case (Gross Pounds):
04.80
Height - Each (Inch):
03.00
Height - Case (Inch):
11.10
Length - Each (Inch):
10.70
Length - Case (Inch):
12.00
Width - Each (Inch):
04.00
Width - Case (Inch):
11.80



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top