×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
ACDelco 45A7123 | Rack and Pinion Bellows Kit
click to zoom in

ACDelco 45A7123 | Rack and Pinion Bellows Kit

(No reviews yet) Write a Review
$14.99
Part Number
ACD45A7123
UPC:
808709289791
Condition:
New
5 customers are viewing this product

video gallery

Description

ACDelco Professional, premium aftermarket Rack and Pinion Bellow Kits are a high quality replacement for many vehicles on the road today. These bellow kits are installed on each side of your vehicle's rack and pinion steering system, helping protect the rack from exposure to water, debris, and other potentially damaging contaminants. These premium aftermarket replacement kits meet the performance standards you would expect from ACDelco. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Engineered to meet your expectations for fit, form, and function
  • Lexus;Toyota
  • Premium, high-quality aftermarket component
  • Provides the performance and dependability you expect from ACDelco

SPECIFICS:

ColorBlack
FAQ - Answer 1No. The CV boot is housed on the axle and prevents grease from leaking out of the CV Joint. The bellows boot is housed on the steering rack and prevents dirt from getting into the steering rack and pinion system.
FAQ - Answer 2No. The boot does not need to be removed, but the clamp securing the bellows to the inner tie rod shaft will need to be loosened to prevent the bellows boot from twisting when the tie rod shaft is turned to adjust the vehicle toe in or toe out specs.
FAQ - Question 1Are a CV boot and Rack and Pinion Bellows the same part?
FAQ - Question 2Does the bellows boot need to be removed in order to turn the inner tie rod during an alignment procedure?
Glue IncludedNo
Good Maintenance Practices - Section 1 - Bullet 1Inspect or have your bellows inspected for signs of wear. Exposure to harsh conditions such as uneven terrain, severe weather, or large temperature changes can all take their toll on the integrity of your rack and pinion bellows, causing wear and even failure. As your bellows wear, your vehicle's steering system is exposed to water and other contaminants from the road, leading to water and dirt accumulation and degradation of the system.
Good Maintenance Practices - Section 1 - Bullet 2Inspect your rack and pinion bellows to help detect wear before it becomes a major problem.
Good Maintenance Practices - Section 1 - Bullet 3Installing new steering rack bellows can interfere with the alignment of your vehicle. Perform a full four-wheel vehicle alignment after any rack and pinion bellow replacement.
Grade TypeRegular
Grease IncludedNo
Height (in)3
Length (in)10.7
MaterialNitrile Blend Rubber
Meets or Exceeds Original Equipment Manufacture SpecificationsYes
Programming RequiredNo
Rib Quantity16
Universal Or Specific FitSpecific
Weight (lb)0.3
Width (in)3.8

DOWNLOADS:

APPLICATIONS:

  • 2007-2009 Lexus RX350 - Position: N/A
  • 2004-2013 Toyota Sienna - Position: N/A
  • 2002-2006 Toyota Camry - Position: N/A
  • 2005-2013 Toyota Avalon - Position: N/A

Attributes
Product type:
Aftermarket
Brand Description:
Rack and Pinion Boot
Grade Type:
Regular
Universal Or Specific Fit:
Specific
Material:
Nitrile Blend Rubber
Programming Required:
No
Color:
Black
Glue Included:
No
Rib Quantity:
16
Grease Included:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Engineered to meet your expectations for fit, form, and function
Features & Benefits - Bullet 3:
Provides the performance and dependability you expect from ACDelco
Features & Benefits - Bullet 1:
Premium, high-quality aftermarket component
Weight (lb) (Pound):
0.3
Height (in) (Inch):
3
Width (in) (Inch):
3.8
Length (in) (Inch):
10.7
FAQ - Answer 2:
No. The boot does not need to be removed, but the clamp securing the bellows to the inner tie rod shaft will need to be loosened to prevent the bellows boot from twisting when the tie rod shaft is turned to adjust the vehicle toe in or toe out specs.
FAQ - Question 1:
Are a CV boot and Rack and Pinion Bellows the same part?
Life Cycle Status:
Announced
FAQ - Question 2:
Does the bellows boot need to be removed in order to turn the inner tie rod during an alignment procedure?
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
FAQ - Answer 1:
No. The CV boot is housed on the axle and prevents grease from leaking out of the CV Joint. The bellows boot is housed on the steering rack and prevents dirt from getting into the steering rack and pinion system.
Item Level GTIN:
00808709289791
Good Maintenance Practices - Section 1 - Bullet 2:
Inspect your rack and pinion bellows to help detect wear before it becomes a major problem.
Good Maintenance Practices - Section 1 - Bullet 3:
Installing new steering rack bellows can interfere with the alignment of your vehicle. Perform a full four-wheel vehicle alignment after any rack and pinion bellow replacement.
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Country of Origin:
Taiwan
Weight - Each (Gross Pounds):
00.30
Weight - Case (Gross Pounds):
03.60
Height - Each (Inch):
03.00
Height - Case (Inch):
11.30
Length - Each (Inch):
10.70
Length - Case (Inch):
12.00
Width - Each (Inch):
03.80
Width - Case (Inch):
11.70



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top