×
close
click to zoom in

ACDelco 45A7125 | Left Rack and Pinion Bellows Kit

(No reviews yet) Write a Review
$15.00
Part Number
ACD45A7125
UPC:
808709274490
Condition:
New
5 customers are viewing this product

Rack and Pinion Boot Kit with Boot and Zip Ties

BRAND: ACDelco

FEATURES:

  • alignment camber kit;alignment caster kit;ball joint bearing;ball joint bolt;ball joint;bushing;center link;center link steering;control arm;control arm bushing;drag link;idler arm;idler arm bracket;idler arm puller;pitman arm;pitman arm puller;suspension control arms;sway bar;tie rod;tie rod ball joint;tie rod end

SPECIFICS:

ACD_RemanDesNo
Clamps IncludedYes
ColorBlack
FAQ - A1No. The CV boot is housed on the axle and prevents grease from leaking out of the CV Joint. The bellows boot is housed on the steering rack and prevents dirt from getting into the steering rack and pinion system.
FAQ - A2No. The boot does not need to be removed, but the clamp securing the bellows to the inner tie rod shaft will need to be loosened to prevent the bellows boot from twisting when the tie rod shaft is turned to adjust the vehicle toe in or toe out specs.
FAQ - Q1Are a CV boot and Rack and Pinion Bellows the same part?
FAQ - Q2Does the bellows boot need to be removed in order to turn the inner tie rod during an alignment procedure?
Features & Benefits - B1Premium, high-quality aftermarket component
Features & Benefits - B2Engineered to meet your expectations for fit, form, and function
Features & Benefits - B3Provides the performance and dependability you expect from ACDelco
Glue IncludedNO
Good Maintenance Practices - S1 B1Inspect or have your bellows inspected for signs of wear. Exposure to harsh conditions such as uneven terrain, severe weather, or large temperature changes can all take their toll on the integrity of your rack and pinion bellows, causing wear and even failure. As your bellows wear, your vehicle's steering system is exposed to water and other contaminants from the road, leading to water and dirt accumulation and degradation of the system.
Good Maintenance Practices - S1 B2Inspect your rack and pinion bellows to help detect wear before it becomes a major problem.
Good Maintenance Practices - S1 B3Installing new steering rack bellows can interfere with the alignment of your vehicle. Perform a full four-wheel vehicle alignment after any rack and pinion bellow replacement.
Grade TypeREGULAR
Grease IncludedNO
Height3
Length10.7
MaterialNitrile Blend Rubber
Mkt_State_Warranty_CALimited Lifetime Warranty as long as the original purchaser still owns the vehicle (Parts Only). Please see ACDelcocanada.com for more details
Mkt_State_Warranty_USLimited Lifetime Warranty as long as the original purchaser still owns the vehicle (Parts Only). Please see ACDelco.com for more details
Mounting Hardware IncludedYes
Product DescriptionACDelco Professional, premium aftermarket Rack and Pinion Bellow Kits are a high quality replacement for many vehicles on the road today. These bellow kits are installed on each side of your vehicle's rack and pinion steering system, helping protect the rack from exposure to water, debris, and other potentially damaging contaminants. These premium aftermarket replacement kits meet the performance standards you would expect from ACDelco. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Programming RequiredNO
Rib Quantity15
Universal Or Specific FitSpecific
Vintage_Part_IndicatorN
Weight.25
Width3.8

DOWNLOADS:

APPLICATIONS:

  • 2003-2007 Infiniti FX35 - Position: Left
  • 2003-2007 Honda Accord - Position: N/A

Product type:
Aftermarket
Product Description:
Rack and Pinion Boot Kit with Boot and Zip Ties
Grade Type:
Regular
Universal Or Specific Fit:
Specific
Mounting Hardware Included:
Yes
Material:
Nitrile Blend Rubber
Programming Required:
No
Color:
Black
Clamps Included:
Yes
Glue Included:
No
Rib Quantity:
15
Grease Included:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Engineered to meet your expectations for fit, form, and function
Features & Benefits - Bullet 3:
Provides the performance and dependability you expect from ACDelco
Features & Benefits - Bullet 1:
Premium, high-quality aftermarket component
Weight (lb) (Pound):
0.25
Height (in) (Inch):
3
Width (in) (Inch):
3.8
Length (in) (Inch):
10.7
Life Cycle Status:
Discontinued
FAQ - Answer 2:
No. The boot does not need to be removed, but the clamp securing the bellows to the inner tie rod shaft will need to be loosened to prevent the bellows boot from twisting when the tie rod shaft is turned to adjust the vehicle toe in or toe out specs.
Life Cycle Status Description:
Discontinued - Part is being removed from the product line.
FAQ - Question 1:
Are a CV boot and Rack and Pinion Bellows the same part?
Item Level GTIN:
00808709274490
FAQ - Question 2:
Does the bellows boot need to be removed in order to turn the inner tie rod during an alignment procedure?
FAQ - Answer 1:
No. The CV boot is housed on the axle and prevents grease from leaking out of the CV Joint. The bellows boot is housed on the steering rack and prevents dirt from getting into the steering rack and pinion system.
Good Maintenance Practices - Section 1 - Bullet 2:
Inspect your rack and pinion bellows to help detect wear before it becomes a major problem.
Good Maintenance Practices - Section 1 - Bullet 3:
Installing new steering rack bellows can interfere with the alignment of your vehicle. Perform a full four-wheel vehicle alignment after any rack and pinion bellow replacement.
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Country of Origin:
Taiwan
Weight - Each (Gross Pounds):
00.25
Weight - Case (Gross Pounds):
03.00
Height - Each (Inch):
03.00
Height - Case (Inch):
11.30
Length - Each (Inch):
10.70
Length - Case (Inch):
12.00
Width - Each (Inch):
03.80
Width - Case (Inch):
11.70



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top