×
close
click to zoom in

ACDelco 45G2011 | Front Suspension Stabilizer Bar Link Kit

(No reviews yet) Write a Review
$21.99
Part Number
ACD45G2011
UPC:
808709307006
Condition:
New
5 customers are viewing this product

The ACDelco Professional Suspension Stabilizer Bar Link Kit comes with everything you need to easily install new suspension stabilizer bar links, and is a high quality replacement for many vehicles on the road today. This premium aftermarket replacement kit meets the performance standards you would expect from ACDelco. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • American Motors|Buick|Chevrolet|Dodge|Edsel|Ford|Jeep|Lincoln|Mercury|Nissan|Oldsmobile|Plymouth
  • Corrosion-resistant coating
  • Full-ball stud provides smooth articulation and excellent durability
  • Over-sized metal rod provides strength
  • Wrench-flats or hex design for easy service

SPECIFICS:

Bushing ColorBlack
Bushing MaterialRubber
End 1 TypeHex
End 2 TypeThreaded
FAQ - Answer 1Yes. An anti-roll bar (roll bar, anti-sway bar, sway bar, stabilizer bar) is a part of many automobile suspensions that helps reduce the body roll of a vehicle during fast cornering or over road irregularities. It connects opposite (left/right) wheels together through short lever arms linked by a torsion spring.
FAQ - Answer 2Yes. Depending on the vehicle you're driving, you may have a front or a rear sway bar, or you may have both. If you suspect that a sway bar is broken, you can still drive the car, but you must use caution and have it repaired as soon as possible. The way this will affect your drive will depend on whether the front or rear sway bar is broken.
FAQ - Question 1Do sway bars and stabilizer bars perform the same function?
FAQ - Question 2Can you drive a car with a broken sway bar?
Front Or Rear SuspensionFront
Good Maintenance Practices - Section 1 - HeaderVehicle alignment will not always be necessary following stabilizer bar link replacement. Unless you must remove other suspension components, replacing the stabilizer bar, its bushings, or its end links should not require a wheel alignment following installation.
Grade TypeRegular
Height (in)3.06
Meets or Exceeds Original Equipment Manufacture SpecificationsYes
Programming RequiredNo
Width (in)3.88

APPLICATIONS:

  • 1956-1956 Ford Squire - Position: Front
  • 1966-1968 American Motors American - Position: Front
  • 1966-1966 American Motors Rogue - Position: Front
  • 1955-1962 Ford Ranch Wagon - Position: Front
  • 1963-1963 Ford 300 - Position: Front
  • 1955-1956 Ford Country Squire - Position: Front
  • 1975-1977 American Motors Pacer - Position: Front
  • 1965-1970 Chevrolet Bel Air - Position: Front
  • 1955-1956 Ford Club - Position: Front
  • 1993-1998 Jeep Grand Cherokee - Position: Rear
  • 1963-1982 Chevrolet Corvette - Position: Front
  • 1955-1956 Ford Fairlane - Position: Front
  • 1964-1964 Ford Custom 500 - Position: Front
  • 1973-1974 Oldsmobile Omega - Position: Front
  • 1966-1966 American Motors Marlin - Position: Front
  • 1986-1997 Ford Aerostar - Position: Front
  • 1973-1973 Plymouth Valiant - Position: Front
  • 1973-1976 Plymouth Duster - Position: Front
  • 1996-1998 Oldsmobile LSS - Position: Front
  • 1970-1970 Plymouth Belvedere - Position: Front
  • 1965-1965 Mercury Cyclone - Position: Front
  • 1959-1960 Edsel Ranger - Position: Front
  • 1960-1960 Ford Victoria - Position: Front
  • 1961-1964 Oldsmobile Fiesta - Position: Front
  • 1962-1964 Ford Galaxie 500 - Position: Front
  • 1955-1956 Ford Skyliner - Position: Front
  • 1995-1999 Buick Riviera - Position: Front
  • 1955-1956 Ford Mainline - Position: Front
  • 1959-1959 Edsel Corsair - Position: Front
  • 1961-1970 Oldsmobile 98 - Position: Front
  • 1957-1957 Ford Custom - Position: Front
  • 1967-1968 Oldsmobile Delmont 88 - Position: Front
  • 1969-1970 Chevrolet Townsman - Position: Front
  • 1955-1956 Ford Victoria - Position: Front
  • 1959-1959 Ford Skyliner - Position: Front
  • 1961-1966 Oldsmobile Dynamic 88 - Position: Front
  • 1965-1970 Chevrolet Biscayne - Position: Front
  • 1965-1970 Chevrolet Impala - Position: Front
  • 1965-1970 Oldsmobile Delta 88 - Position: Front
  • 1970-1972 Plymouth Satellite - Position: Front
  • 1956-1956 Ford Park Lane Wagon - Position: Front
  • 1969-1970 Chevrolet Estate - Position: Front
  • 1964-1964 Ford Mustang - Position: Front
  • 1970-1973 Nissan 240Z - Position: Front
  • 1970-1972 Dodge Coronet - Position: Front
  • 1964-1964 Ford Custom - Position: Front
  • 1955-1956 Ford Customline - Position: Front
  • 1959-1964 Ford Galaxie - Position: Front
  • 1961-1964 Mercury Monterey - Position: Front
  • 1955-1964 Ford Country Sedan - Position: Front
  • 1966-1970 Chevrolet Caprice - Position: Front
  • 1977-1980 Lincoln Versailles - Position: Front
  • 1966-1966 American Motors Classic - Position: Front
  • 1969-1969 American Motors Rambler - Position: Front
  • 1970-1972 Plymouth Road Runner - Position: Front
  • 1957-1964 Mercury Colony Park - Position: Front
  • 1970-1970 Plymouth Superbird - Position: Front
  • 1957-1959 Ford Custom 300 - Position: Front
  • 1968-1968 Ford Mustang - Position: Front
  • 1967-1969 American Motors Rebel - Position: Front
  • 1959-1959 Ford Sunliner - Position: Front
  • 1973-1976 Dodge Dart - Position: Front
  • 1959-1960 Edsel Villager - Position: Front
  • 1970-1972 Dodge Charger - Position: Front
  • 1970-1971 Plymouth GTX - Position: Front
  • 1974-1974 Nissan 260Z - Position: Front
  • 1969-1970 Chevrolet Kingswood - Position: Front
  • 1957-1958 Ford Del Rio Wagon - Position: Front
  • 1973-1976 Plymouth Scamp - Position: Front
  • 1960-1960 Ford Starliner - Position: Front

Product type:
Aftermarket
Product Description:
Suspension Stabilizer Bar Link Kit
Grade Type:
Regular
Programming Required:
No
Length (Inch):
10.75
Weight (Pound):
1
End 2 Type:
Threaded
End 1 Type:
Hex
Bushing Material:
Rubber
Bushing Color:
Black
Front Or Rear Suspension:
Front
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Full-ball stud provides smooth articulation and excellent durability
Features & Benefits - Bullet 4:
Corrosion-resistant coating
Features & Benefits - Bullet 3:
Wrench-flats or hex design for easy service
Features & Benefits - Bullet 1:
Over-sized metal rod provides strength
Height (in) (Inch):
3.06
Width (in) (Inch):
3.88
FAQ - Question 1:
Do sway bars and stabilizer bars perform the same function?
FAQ - Question 2:
Can you drive a car with a broken sway bar?
Life Cycle Status:
Announced
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Country of Origin:
United States
Item Level GTIN:
00808709307006
Weight - Each (Gross Pounds):
01.00
Weight - Case (Gross Pounds):
08.00
Height - Each (Inch):
03.06
Height - Case (Inch):
08.69
Length - Each (Inch):
10.75
Length - Case (Inch):
11.25
Width - Each (Inch):
03.88
Width - Case (Inch):
10.81



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top