×
close
click to zoom in

ACDelco 45U0188 | Universal Joint

(No reviews yet) Write a Review
$49.99
Part Number
ACD45U0188
UPC:
707773285572
Condition:
New
5 customers are viewing this product

U-Joint

BRAND: ACDelco

FEATURES:

  • alignment camber kit;alignment caster kit;ball joint bearing;ball joint bolt;ball joint;bushing;center link;center link steering;control arm;control arm bushing;drag link;idler arm;idler arm bracket;idler arm puller;pitman arm;pitman arm puller;suspension control arms;sway bar;tie rod;tie rod ball joint;tie rod end

SPECIFICS:

ACD_RemanDesNo
AltPA_3165_mm67.30
AltPA_3166_mm67.30
AltPA_6706_mm27.00
AltPA_6707_mm27.00
Bearing Cap Axis 1 Diameter1.063
Bearing Cap Axis 2 Diameter1.063
Bearing Cap TypeRound Plain
FAQ - A1Yes. This vibration means that the universal joint bearings have now worn enough to allow the driveshaft to move outside its normal rotational path, causing imbalance and vibration.
FAQ - A2Yes. Transmission fluid leaking from the rear of the transmission is often the result of a badly worn universal joint. The vibration will wear the transmission tail shaft bushing and damage the transmission output shaft seal, causing a fluid leak.
FAQ - Q1Can a Universal Joint cause a vibration in the vehicle drivetrain?
FAQ - Q2Can a worn Universal Joint lead to transmission fluid leaks?
Features & Benefits - B1Provide pivot points for drive shafts
Features & Benefits - B2Premium, high-quality aftermarket component
Features & Benefits - B3Provides the performance and dependability you expect from ACDelco
Good Maintenance Practices - S1 B1Inspect your universal joints for wear or missing clips.
Good Maintenance Practices - S1 B2Pull your vehicle's e-brake and put the tires on blocks.
Good Maintenance Practices - S1 B3Put your vehicle in neutral and crawl underneath it to rotate the driveshaft back and forth.
Good Maintenance Practices - S1 B4Move the driveshaft forward and backward.
Good Maintenance Practices - S1 HDriveshaft angles should not exceed 22 degrees because universal joints cannot run at higher driveshaft angles unless specially designed. Also you can:
Grade TypePERFORMANCE
GreaseableYES
Inside Yoke Lock-UpYES
Length Axis 12.65
Length Axis 22.65
Lock Ring LocationEnd Of Cap
MaterialSteel
Mkt_State_Warranty_CALimited Lifetime Warranty as long as the original purchaser still owns the vehicle (Parts Only). Please see ACDelcocanada.com for more details
Mkt_State_Warranty_USLimited Lifetime Warranty as long as the original purchaser still owns the vehicle (Parts Only). Please see ACDelco.com for more details
Mounting Hardware IncludedYes
Outside Yoke Lock UpNO
Product DescriptionACDelco Professional Universal Joints are a high quality replacement for many vehicles on the road today. A universal joint helps transmits power from the transmission to the rear differential through the driveshaft and allow for vertical movement of the driveshaft during its rotation. This premium aftermarket replacement component is manufactured to meet your expectations for fit, form, and function. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Programming RequiredNO
Snap Rings IncludedYES
Solid ShaftNO
TypePlain Round
Vintage_Part_IndicatorN

Premium Greaseable

DOWNLOADS:

APPLICATIONS:

  • 2005-2006 Chevrolet Equinox - Position: Rear Driveshaft at Rear Axle
  • 2002-2007 Saturn Vue - Position: Rear Driveshaft at Support Bearing
  • 2005-2006 Chevrolet Equinox - Position: Rear Driveshaft at Support Bearing
  • 2006-2006 Pontiac Torrent - Position: Rear Driveshaft at Support Bearing
  • 2006-2006 Pontiac Torrent - Position: Rear Driveshaft at Rear Axle
  • 2002-2007 Saturn Vue - Position: Rear Driveshaft at Rear Axle

Product type:
Aftermarket
Product Description:
U-Joint
Grade Type:
Performance
Mounting Hardware Included:
Yes
Material:
Steel
Programming Required:
No
Type:
Plain Round
Length Axis 1 (Inch):
2.65
Length Axis 2 (Inch):
2.65
Greasable:
Yes
Outside Yoke Lock Up:
No
Bearing Cap Axis 2 Diameter (Inch):
1.063
Bearing Cap Axis 1 Diameter (Inch):
1.063
Solid Shaft:
No
Bearing Cap Type:
Round Plain
Snap Rings Included:
Yes
Lock Ring Location:
End Of Cap
Inside Yoke Lock-Up:
Yes
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Premium, high-quality aftermarket component
Life Cycle Status:
Announced
Features & Benefits - Bullet 3:
Provides the performance and dependability you expect from ACDelco
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Features & Benefits - Bullet 1:
Provide pivot points for drive shafts
Item Level GTIN:
00707773285572
FAQ - Answer 2:
Yes. Transmission fluid leaking from the rear of the transmission is often the result of a badly worn universal joint. The vibration will wear the transmission tail shaft bushing and damage the transmission output shaft seal, causing a fluid leak.
FAQ - Question 1:
Can a Universal Joint cause a vibration in the vehicle drivetrain?
FAQ - Question 2:
Can a worn Universal Joint lead to transmission fluid leaks?
FAQ - Answer 1:
Yes. This vibration means that the universal joint bearings have now worn enough to allow the driveshaft to move outside its normal rotational path, causing imbalance and vibration.
Good Maintenance Practices - Section 1 - Bullet 1:
Inspect your universal joints for wear or missing clips.
Good Maintenance Practices - Section 1 - Bullet 2:
Pull your vehicle's e-brake and put the tires on blocks.
Good Maintenance Practices - Section 1 - Bullet 3:
Put your vehicle in neutral and crawl underneath it to rotate the driveshaft back and forth.
Good Maintenance Practices - Section 1 - Bullet 4:
Move the driveshaft forward and backward.
Good Maintenance Practices - Section 1 - Header:
Driveshaft angles should not exceed 22 degrees because universal joints cannot run at higher driveshaft angles unless specially designed. Also you can:
Length Axis 1 (Millimeter):
67.3
Length Axis 2 (Millimeter):
67.3
Bearing Cap Axis 2 Diameter (Millimeter):
27
Country of Origin:
Mexico
Weight - Each (Gross Pounds):
00.41
Weight - Case (Gross Pounds):
10.25
Height - Each (Inch):
01.50
Height - Case (Inch):
04.40
Length - Each (Inch):
03.70
Length - Case (Inch):
18.30
Width - Each (Inch):
03.70
Width - Case (Inch):
07.30



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top