×
close
click to zoom in

ACDelco 519-2 | Rear Shock Absorber

(No reviews yet) Write a Review
$114.99
Part Number
ACD519-2
UPC:
21625319933
Condition:
New
5 customers are viewing this product

ACDelco Specialty Spring Assist Shocks offer the benefits of both spring and shock technology to help reduce ride height loss in ongoing loaded conditions. These shocks produce strength, dependability, and long-life performance with both constant-rate front coil springs and variable-rate rear coil springs.

BRAND: ACDelco

FEATURES:

  • Constant rate front coil springs can help improve stability and maintain ride height
  • Real-world tested to ensure that the shocks will fit intended vehicles and applications
  • Seamless Drawn-Over-Mandrel (DOM) tubing decreases internal component wear, resulting in longer service life
  • Super finished, chromed, piston rod provides anti-corrosion properties, a more consistent wear surface, proper seal lubrication, and longer product life
  • Variable rate rear coil springs provide 500 lbs (per pair) of load capacity. [Not to exceed vehicle GVWR (Gross Vehicle Weight Rating). Product does not increase payload.]

SPECIFICS:

ACD_RemanDesNo
AltPA_107_mm320.548
AltPA_3042_mm519.43
AltPA_38_mm198.88
Comparison Chart 1PL05_PL09_CC_MaintShockStrut.jpg
Comparison Chart 2PL09_CC_ChromedRodVsUncoatedRod.jpg
FAQ - A1Yes, though shocks and struts perform a similar function, they vary greatly in their design. Struts are an integral part of a vehicle's suspension system, providing structural support for the vehicle and, as such, are a safety subsystem. Shocks work separately from any structural function, simply absorbing and damping the bumps from the road.
FAQ - A2Yes, all shocks and struts use hydraulic fluid (oil) to control damping. A gas charged shock or strut uses high-pressure nitrogen gas to reduce oil foaming during high-speed damping, and therefore maintains performance.
FAQ - A3Yes, it is possible to do a quick check at home for wear on your vehicle's shocks or struts. You can look for any physical damage to the shock or strut housing or any leaking - this is especially common on rear units that tend to have stones kicked up by the front wheels. You can also perform a bounce test by taking each corner of the vehicle and pushing down hard. The corner should drop, rise and settle again. If the body continues to move up and down, there's a good chance your shocks need to be replaced. Though these home tests can indicate worn shocks or struts, it is also recommended that you take your vehicle to a qualified service technician and let them do a thorough inspection every 12 months or 12,000 miles.
FAQ - A4Yes, if you are replacing your vehicle's struts. However, it is not necessary to get your vehicle aligned when replacing your vehicle's shocks unless there was or is a previous issue.
FAQ - A5Yes, it is important to choose the correct shock or strut for your vehicle model and year, as well as for the location in the vehicle.
FAQ - Q1Is there a difference between a shock and a strut?
FAQ - Q2Do gas charged shocks or struts contain oil?
FAQ - Q3Can I check my vehicle's shocks for wear?
FAQ - Q4Should I have my vehicle aligned after replacing my shocks or struts?
FAQ - Q5Do I need different shocks for front, rear, left, or right applications?
Good Maintenance Practices - S1 B1Brakes
Good Maintenance Practices - S1 B2Tie rods
Good Maintenance Practices - S1 B3Ball joints
Good Maintenance Practices - S1 B4Tires
Good Maintenance Practices - S1 HYour vehicle's shocks and struts slowly deteriorate over time, though this wear is normally difficult to detect. To maximize your vehicle's ride comfort and safety, it is recommended to replace your vehicle's shocks and struts every 50,000 miles. Worn shocks and struts can also cause additional wear to other vehicle components. Affected components include:
Good Maintenance Practices - S2 B1Leaking oil or wetness along the body of the shock or strut.
Good Maintenance Practices - S2 B2Broken mounts, worn or missing bushings.
Good Maintenance Practices - S2 B3Broken, damaged, or missing mounting hardware.
Good Maintenance Practices - S2 B4Severely dented reservoir tube, bent or scratched piston rod.
Good Maintenance Practices - S2 B5Cupped tire wear.
Good Maintenance Practices - S2 B6Damaged strut body springs, seats, and bushings.
Good Maintenance Practices - S2 B7Defective strut bearing or missing plate.
Good Maintenance Practices - S2 HTo inspect your shocks and struts to gauge wear, check for:
Keyword SearchACDelco; Auto Parts; Automotive; Light Duty Trucks; Shock; Shock Absorber; Shock Absorber Kit; Shocks and Struts; Shocks, Struts, and Suspension; Specialty; Spring Assist; Suspension; ABSORBER KIT,FRT SHK; ABSORBER KIT,RR LVLG SHK; ABSORBER KIT,RR SHK; ABSORBER,FRT SHK; ABSORBER,RR LVLG SHK; ABSORBER,RR SHK; ABSORBER,RR SHK (W/ SHLD); ABSORBER,RR SHK(W/UPR MT)
Marketing Statement - Product LineACDelco provides superior comfort, control, and durability through our Professional, Advantage, and Specialty Suspension lines. We offer a wide variety of parts, such as, suspension components, steering dampers, and lift supports. Preserving your vehicle's safety and driving comfort means also maintaining your vehicle's suspension. ACDelco Suspension Components, like shocks and struts, provide outstanding ride, comfort, and handling for your passenger car, light truck, or SUV. Keep your steering smooth and vibration-free with ACDelco Steering Dampers and use ACDelco Lift Supports to retain your vehicle's accessibility and convenience. To maintain vehicle safety and comfort, as well as convenience and performance, look no further than ACDelco Suspension Components.
Marketing Statement - Sub BrandWhen it comes to replacing your shocks and struts, ACDelco offers Specialty Shocks. Able to fit many GM sport utility and performance vehicles on the road today, ACDelco Specialty Shocks are built to handle demanding applications like towing and temporary loads. Get great ride and handling for your sport utility or performance vehicle with ACDelco Specialty Shocks.
Mkt_BrandQual_NameSpring Assist
Mkt_State_Warranty_CALimited Lifetime Warranty as long as original purchaser still owns vehicle (Parts Only).
Mkt_State_Warranty_US24 Month / Unlimited Mile Limited Warranty (Parts Only). Please see ACDelco.com for more details.
Signs of Wear & Troubleshooting - S1 B1There is directional and steering wheel position instability
Signs of Wear & Troubleshooting - S1 B2Your brakes pull
Signs of Wear & Troubleshooting - S1 B3You notice worn or loose suspension or steering components
Signs of Wear & Troubleshooting - S1 B4There is excessive nose dive while braking
Signs of Wear & Troubleshooting - S1 B5Your vehicle has 'acceleration squat'
Signs of Wear & Troubleshooting - S1 B6Your vehicle does not return to a neutral position
Signs of Wear & Troubleshooting - S1 B7Your steering pulls
Signs of Wear & Troubleshooting - S1 B8There is a strut mount or bearing noise
Signs of Wear & Troubleshooting - S1 HIt could be time to replace your shocks or struts if, when driving on a flat smooth surface:
Signs of Wear & Troubleshooting - S2 B1Your ride is harsh, bumpy or shaky
Signs of Wear & Troubleshooting - S2 B2Your vehicle bounces excessively
Signs of Wear & Troubleshooting - S2 B3Your vehicle veers in side winds
Signs of Wear & Troubleshooting - S2 B4Your vehicle leans or sways while turning
Signs of Wear & Troubleshooting - S2 B5Your vehicle bounces excessively after hitting a bump
Signs of Wear & Troubleshooting - S2 B6Your vehicle bottoms out
Signs of Wear & Troubleshooting - S2 HIt could be time to replace your shocks or struts if, when driving on a surface with bumps and/or dips:
Signs of Wear & Troubleshooting - S3 B1If your vehicle's height seems lower than normal when measured
Signs of Wear & Troubleshooting - S3 B2If you notice fluid leakage from your vehicle's shocks or struts
Signs of Wear & Troubleshooting - S3 B3If your vehicle's shocks or struts have dented or heavily scratched housings or mounts
Signs of Wear & Troubleshooting - S3 HUneven patches of wear on the edges of your tire can be a sign of weak ride control (shocks or struts). This wear, called cupping, appears as scalloped dips around the surface of the tread. Other signs it could be time to replace your shocks or struts include:
Vintage_Part_IndicatorN

DOWNLOADS:

APPLICATIONS:

  • 1988-1988 Toyota Van Wagon - Position: Rear
  • 1976-1980 Plymouth Colt - Position: Rear
  • 1968-1968 International 1300C - Position: Front
  • 1961-1966 Ford F-350 - Position: Rear
  • 1968-1972 International M1200 - Position: Rear
  • 1987-1993 Mazda B2200 - Position: Rear
  • 1981-1985 Jeep Scrambler - Position: Rear
  • 1966-1968 Jeep DJ6 - Position: Rear
  • 1987-1994 Nissan D21 - Position: Rear
  • 1968-1968 International 1000C - Position: Rear
  • 1968-1976 Ford P-350 - Position: Front
    • Up through 8000# GVW
  • 1986-1986 Nissan D21 - Position: Rear
    • Mfg. from 8/86
  • 1957-1960 Jeep FC150 - Position: Rear
  • 1971-1980 Dodge Colt - Position: Rear
  • 1968-1968 International 1200C - Position: Front
  • 1998-2004 Nissan Frontier - Position: Rear
    • Exc. Desert Runner
  • 1963-1965 Jeep FC170 - Position: Rear
  • 1976-1986 Jeep CJ7 - Position: Rear
    • Exc. Lift Kit
  • 1972-1975 Jeep CJ6 - Position: Rear
    • Exc. Lift Kit
  • 1969-1969 International M1400 - Position: Rear
  • 1966-1971 Jeep CJ6 - Position: Rear
  • 1972-1983 Jeep CJ5 - Position: Rear
    • Exc. Lift Kit
  • 1975-1980 Chevrolet LUV - Position: Rear
  • 1970-1971 Jeep Jeepster - Position: Rear
  • 1983-1993 Dodge Ram 50 - Position: Rear
  • 1963-1965 Jeep FC170 - Position: Front
  • 1968-1972 International M1100 - Position: Rear
  • 1975-1983 Toyota Pickup - Position: Rear
    • Mojave
  • 1984-1995 Toyota Pickup - Position: Rear
  • 1972-1974 Chevrolet Luv Pickup - Position: Rear
  • 1956-1956 Chevrolet Truck - Position: Front
    • 3100
  • 1975-1976 Ford P-400 - Position: Front
    • Up through 8000# GVW
  • 1968-1968 International 1300C - Position: Rear
    • Exc. 166" Wheelbase
  • 1986-1987 Mazda B2000 - Position: Rear
  • 1984-1988 Toyota Van - Position: Rear
  • 1961-1964 Ford F-100 - Position: Rear
  • 1966-1974 Jeep DJ5 - Position: Rear
    • Exc. Lift Kit
  • 1987-1990 Mitsubishi Van - Position: Rear
  • 1970-1974 Toyota Pickup - Position: Rear
    • RWD
  • 1968-1968 International 908C - Position: Rear
  • 1955-1956 Chevrolet Truck - Position: Front
  • 1983-1996 Mitsubishi Mighty Max - Position: Rear
  • 1961-1967 Jeep Universal - Position: Rear
  • 1995-1997 Nissan Pickup - Position: Rear
  • 1963-1966 Jeep Gladiator - Position: Rear
    • Independent Front Suspension
  • 1968-1968 International 1200C - Position: Rear
    • Exc. 166" Wheelbase
  • 1968-1968 International 1100C - Position: Front
  • 1966-1971 Jeep CJ5 - Position: Rear
  • 1968-1968 International 1100C - Position: Rear
    • Exc. 166" Wheelbase
  • 1961-1964 Ford F-250 - Position: Rear
  • 1979-1982 Dodge D50 - Position: Rear
  • 1987-1993 Mazda B2600 - Position: Rear
  • 1979-1982 Plymouth Arrow Pickup - Position: Rear

Product type:
Aftermarket
Product Description:
Spring Assisted Shock Absorber
Mounting Hardware Included:
No
Programming Required:
No
Adjustable:
No
Shock Absorber Rod End Measuring Point:
Ring Center
Lower Mount Type:
Eyelet
Upper Mount Type:
Eyelet
Coil Over Springs Included:
Yes
Compressed Length (Inch):
12.62
Gas Charged:
No
Boot Included:
No
Dust Shield:
No
Shock Absorber Body End Measuring Point:
Ring Center
Shock Stroke (Inch):
7.83
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Variable rate rear coil springs provide 500 lbs (per pair) of load capacity. [Not to exceed vehicle GVWR (Gross Vehicle Weight Rating). Product does not increase payload.]
Features & Benefits - Bullet 4:
Super finished, chromed, piston rod provides anti-corrosion properties, a more consistent wear surface, proper seal lubrication, and longer product life
Features & Benefits - Bullet 3:
Seamless Drawn-Over-Mandrel (DOM) tubing decreases internal component wear, resulting in longer service life
Features & Benefits - Bullet 1:
Constant rate front coil springs can help improve stability and maintain ride height
Life Cycle Status:
Announced
Signs of Wear & Troubleshooting - Section 1 - Bull:
Your vehicle does not return to a neutral position
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Your vehicle has 'acceleration squat'
Item Level GTIN:
00021625319933
Signs of Wear & Troubleshooting - Section 1 - Bull:
There is excessive nose dive while braking
Signs of Wear & Troubleshooting - Section 1 - Bull:
There is a strut mount or bearing noise
Signs of Wear & Troubleshooting - Section 1 - Bull:
Your steering pulls
FAQ - Question 4:
Should I have my vehicle aligned after replacing my shocks or struts?
FAQ - Answer 2:
Yes, all shocks and struts use hydraulic fluid (oil) to control damping. A gas charged shock or strut uses high-pressure nitrogen gas to reduce oil foaming during high-speed damping, and therefore maintains performance.
FAQ - Question 3:
Can I check my vehicle's shocks for wear?
FAQ - Question 1:
Is there a difference between a shock and a strut?
FAQ - Answer 5:
Yes, it is important to choose the correct shock or strut for your vehicle model and year, as well as for the location in the vehicle.
FAQ - Question 2:
Do gas charged shocks or struts contain oil?
Features & Benefits - Bullet 5:
Real-world tested to ensure that the shocks will fit intended vehicles and applications
FAQ - Question 5:
Do I need different shocks for front, rear, left, or right applications?
FAQ - Answer 4:
Yes, if you are replacing your vehicle's struts. However, it is not necessary to get your vehicle aligned when replacing your vehicle's shocks unless there was or is a previous issue.
Good Maintenance Practices - Section 1 - Bullet 1:
Brakes
Good Maintenance Practices - Section 1 - Bullet 2:
Tie rods
Good Maintenance Practices - Section 1 - Bullet 3:
Ball joints
Good Maintenance Practices - Section 1 - Bullet 4:
Tires
Good Maintenance Practices - Section 2 - Bullet 1:
Leaking oil or wetness along the body of the shock or strut.
Good Maintenance Practices - Section 2 - Bullet 2:
Broken mounts, worn or missing bushings.
Good Maintenance Practices - Section 2 - Bullet 3:
Broken, damaged, or missing mounting hardware.
Good Maintenance Practices - Section 2 - Bullet 4:
Severely dented reservoir tube, bent or scratched piston rod.
Good Maintenance Practices - Section 2 - Bullet 5:
Cupped tire wear.
Signs of Wear & Troubleshooting - Section 2 - Bull:
Your vehicle veers in side winds
Signs of Wear & Troubleshooting - Section 2 - Bull:
Your vehicle leans or sways while turning
Signs of Wear & Troubleshooting - Section 2 - Bull:
Your vehicle bounces excessively after hitting a bump
Signs of Wear & Troubleshooting - Section 2 - Bull:
Your vehicle bounces excessively
Signs of Wear & Troubleshooting - Section 2 - Bull:
Your vehicle bottoms out
Signs of Wear & Troubleshooting - Section 2 - Bull:
Your ride is harsh, bumpy or shaky
Signs of Wear & Troubleshooting - Section 2 - Head:
It could be time to replace your shocks or struts if, when driving on a surface with bumps and/or dips:
Signs of Wear & Troubleshooting - Section 3 - Bull:
If your vehicle's shocks or struts have dented or heavily scratched housings or mounts
Signs of Wear & Troubleshooting - Section 3 - Bull:
If your vehicle's height seems lower than normal when measured
Signs of Wear & Troubleshooting - Section 3 - Bull:
If you notice fluid leakage from your vehicle's shocks or struts
Good Maintenance Practices - Section 2 - Header:
To inspect your shocks and struts to gauge wear, check for:
Good Maintenance Practices - Section 2 - Bullet 7:
Defective strut bearing or missing plate.
Good Maintenance Practices - Section 2 - Bullet 6:
Damaged strut body springs, seats, and bushings.
Compressed Length (Millimeter):
320.548
Fully Open Length (in):
20.45 in
Shock Stroke (Millimeter):
198.88
Fully Open Length (mm):
519.43 mm
Country of Origin:
Mexico
Weight - Each (Gross Pounds):
14.67
Height - Each (Inch):
03.70
Length - Each (Inch):
27.70
Width - Each (Inch):
07.50



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top