×
close
click to zoom in

ACDelco 519-30 | Rear Suspension Shock Absorber

(No reviews yet) Write a Review
$138.99
Part Number
ACD519-30
UPC:
21625322322
Condition:
New
5 customers are viewing this product

ACDelco Specialty Spring Assist Shocks offer the benefits of both spring and shock technology to help reduce ride height loss in ongoing loaded conditions. These shocks produce strength, dependability, and long-life performance with both constant-rate front coil springs and variable-rate rear coil springs. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • absorbers;shocks;absorbor;suspension;spring;shock-absorber;damping;twin-tube;rear;front;back;gas-charged;acceleration;sensitive;monotube;mono-tube;hydro-pneumatic;load-adjusting;coil-overs;coil;coil-over
  • Chevrolet;Dodge;GMC;Ram
  • Constant rate front coil springs can help improve stability and maintain ride height
  • Real-world tested to ensure that the shocks will fit intended vehicles and applications
  • Rear Shock Absorber
  • Rear Spring Assisted Shock Absorber
  • Seamless Drawn-Over-Mandrel (DOM) tubing decreases internal component wear, resulting in longer service life
  • Super finished, chromed, piston rod provides anti-corrosion properties, a more consistent wear surface, proper seal lubrication, and longer product life
  • Variable rate rear coil springs provide 500 lbs (per pair) of load capacity. [Not to exceed vehicle GVWR (Gross Vehicle Weight Rating). Product does not increase payload.]

SPECIFICS:

FAQ - Answer 1Yes, though shocks and struts perform a similar function, they vary greatly in their design. Struts are an integral part of a vehicle's suspension system, providing structural support for the vehicle and, as such, are a safety subsystem. Shocks work separately from any structural function, simply absorbing and damping the bumps from the road.
FAQ - Answer 2Yes, all shocks and struts use hydraulic fluid (oil) to control damping. A gas charged shock or strut uses high-pressure nitrogen gas to reduce oil foaming during high-speed damping, and therefore maintains performance.
FAQ - Answer 3Yes, it is possible to do a quick check at home for wear on your vehicle's shocks or struts. You can look for any physical damage to the shock or strut housing or any leaking - this is especially common on rear units that tend to have stones kicked up by the front wheels. You can also perform a bounce test by taking each corner of the vehicle and pushing down hard. The corner should drop, rise and settle again. If the body continues to move up and down, there's a good chance your shocks need to be replaced. Though these home tests can indicate worn shocks or struts, it is also recommended that you take your vehicle to a qualified service technician and let them do a thorough inspection every 12 months or 12,000 miles.
FAQ - Answer 4Yes, if you are replacing your vehicle's struts. However, it is not necessary to get your vehicle aligned when replacing your vehicle's shocks unless there was or is a previous issue.
FAQ - Answer 5Yes, it is important to choose the correct shock or strut for your vehicle model and year, as well as for the location in the vehicle.
FAQ - Question 1Is there a difference between a shock and a strut?
FAQ - Question 2Do gas charged shocks or struts contain oil?
FAQ - Question 3Can I check my vehicle's shocks for wear?
FAQ - Question 4Should I have my vehicle aligned after replacing my shocks or struts?
FAQ - Question 5Do I need different shocks for front, rear, left, or right applications?
Fully Open Length (in)24.24 in
Fully Open Length (mm)615.696 mm
Good Maintenance Practices - Section 1 - Bullet 1Brakes
Good Maintenance Practices - Section 1 - Bullet 2Tie rods
Good Maintenance Practices - Section 1 - Bullet 3Ball joints
Good Maintenance Practices - Section 1 - Bullet 4Tires
Good Maintenance Practices - Section 1 - HeaderYour vehicle's shocks and struts slowly deteriorate over time, though this wear is normally difficult to detect. To maximize your vehicle's ride comfort and safety, it is recommended to replace your vehicle's shocks and struts every 50,000 miles. Worn shocks and struts can also cause additional wear to other vehicle components. Affected components include:
Good Maintenance Practices - Section 2 - Bullet 1Leaking oil or wetness along the body of the shock or strut.
Good Maintenance Practices - Section 2 - Bullet 2Broken mounts, worn or missing bushings.
Good Maintenance Practices - Section 2 - Bullet 3Broken, damaged, or missing mounting hardware.
Good Maintenance Practices - Section 2 - Bullet 4Severely dented reservoir tube, bent or scratched piston rod.
Good Maintenance Practices - Section 2 - Bullet 5Cupped tire wear.
Good Maintenance Practices - Section 2 - Bullet 6Damaged strut body springs, seats, and bushings.
Good Maintenance Practices - Section 2 - Bullet 7Defective strut bearing or missing plate.
Good Maintenance Practices - Section 2 - HeaderTo inspect your shocks and struts to gauge wear, check for:
Mounting Hardware IncludedNo
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1There is excessive nose dive while braking
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Your vehicle has 'acceleration squat'
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Your vehicle does not return to a neutral position
Signs of Wear & Troubleshooting - Section 1 - Bullet 4Your steering pulls
Signs of Wear & Troubleshooting - Section 1 - Bullet 5There is a strut mount or bearing noise
Signs of Wear & Troubleshooting - Section 2 - Bullet 1Your ride is harsh, bumpy or shaky
Signs of Wear & Troubleshooting - Section 2 - Bullet 2Your vehicle bounces excessively
Signs of Wear & Troubleshooting - Section 2 - Bullet 3Your vehicle veers in side winds
Signs of Wear & Troubleshooting - Section 2 - Bullet 4Your vehicle leans or sways while turning
Signs of Wear & Troubleshooting - Section 2 - Bullet 5Your vehicle bounces excessively after hitting a bump
Signs of Wear & Troubleshooting - Section 2 - Bullet 6Your vehicle bottoms out
Signs of Wear & Troubleshooting - Section 2 - HeaderIt could be time to replace your shocks or struts if, when driving on a surface with bumps and/or dips:
Signs of Wear & Troubleshooting - Section 3 - Bullet 1If your vehicle's height seems lower than normal when measured
Signs of Wear & Troubleshooting - Section 3 - Bullet 2If you notice fluid leakage from your vehicle's shocks or struts
Signs of Wear & Troubleshooting - Section 3 - Bullet 3If your vehicle's shocks or struts have dented or heavily scratched housings or mounts
Signs of Wear & Troubleshooting - Section 3 - HeaderUneven patches of wear on the edges of your tire can be a sign of weak ride control (shocks or struts). This wear, called cupping, appears as scalloped dips around the surface of the tread. Other signs it could be time to replace your shocks or struts include:

APPLICATIONS:

  • 2007-2007 Chevrolet Silverado 1500 Classic - Position: Rear
    • Exc. Electronic Adjustable Suspension
  • 2019-2019 GMC Sierra 1500 Limited - Position: Rear
  • 2014-2020 Ram 3500 - Position: Rear
  • 2007-2020 GMC Sierra 1500 - Position: Rear
  • 1999-2006 GMC Sierra 1500 - Position: Rear
    • Exc. Electronic Adjustable Suspension
  • 1994-2001 Dodge Ram 1500 - Position: Rear
  • 2011-2020 GMC Sierra 3500 HD - Position: Rear
  • 2007-2007 GMC Sierra 1500 Classic - Position: Rear
    • Exc. Electronic Adjustable Suspension
  • 2011-2020 Chevrolet Silverado 2500 HD - Position: Rear
  • 1994-2002 Dodge Ram 3500 - Position: Rear
    • Exc. Solid Front Axle
  • 2011-2020 Chevrolet Silverado 3500 HD - Position: Rear
  • 2019-2019 Chevrolet Silverado 1500 LD - Position: Rear
  • 2011-2020 GMC Sierra 2500 HD - Position: Rear
  • 2007-2020 Chevrolet Silverado 1500 - Position: Rear
  • 1999-2006 Chevrolet Silverado 1500 - Position: Rear
    • Exc. Electronic Adjustable Suspension

Product type:
Aftermarket
Brand Description:
Rear Shock Absorber
Product Description:
Rear Spring Assisted Shock Absorber
Mounting Hardware Included:
No
Programming Required:
No
Adjustable:
No
Shock Absorber Rod End Measuring Point:
Ring Center
Lower Mount Type:
Eyelet
Upper Mount Type:
Eyelet
Coil Over Springs Included:
Yes
Compressed Length (Inch):
14.88
Gas Charged:
No
Boot Included:
No
Dust Shield:
No
Shock Absorber Body End Measuring Point:
Ring Center
Shock Stroke (Inch):
9.36
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Variable rate rear coil springs provide 500 lbs (per pair) of load capacity. [Not to exceed vehicle GVWR (Gross Vehicle Weight Rating). Product does not increase payload.]
Features & Benefits - Bullet 4:
Super finished, chromed, piston rod provides anti-corrosion properties, a more consistent wear surface, proper seal lubrication, and longer product life
Features & Benefits - Bullet 3:
Seamless Drawn-Over-Mandrel (DOM) tubing decreases internal component wear, resulting in longer service life
Features & Benefits - Bullet 1:
Constant rate front coil springs can help improve stability and maintain ride height
Life Cycle Status:
Announced
Signs of Wear & Troubleshooting - Section 1 - Bull:
Your vehicle does not return to a neutral position
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Your vehicle has 'acceleration squat'
Item Level GTIN:
00021625322322
Signs of Wear & Troubleshooting - Section 1 - Bull:
There is excessive nose dive while braking
Signs of Wear & Troubleshooting - Section 1 - Bull:
There is a strut mount or bearing noise
Signs of Wear & Troubleshooting - Section 1 - Bull:
Your steering pulls
FAQ - Question 4:
Should I have my vehicle aligned after replacing my shocks or struts?
FAQ - Answer 2:
Yes, all shocks and struts use hydraulic fluid (oil) to control damping. A gas charged shock or strut uses high-pressure nitrogen gas to reduce oil foaming during high-speed damping, and therefore maintains performance.
FAQ - Question 3:
Can I check my vehicle's shocks for wear?
FAQ - Question 1:
Is there a difference between a shock and a strut?
FAQ - Answer 5:
Yes, it is important to choose the correct shock or strut for your vehicle model and year, as well as for the location in the vehicle.
FAQ - Question 2:
Do gas charged shocks or struts contain oil?
Features & Benefits - Bullet 5:
Real-world tested to ensure that the shocks will fit intended vehicles and applications
FAQ - Question 5:
Do I need different shocks for front, rear, left, or right applications?
FAQ - Answer 4:
Yes, if you are replacing your vehicle's struts. However, it is not necessary to get your vehicle aligned when replacing your vehicle's shocks unless there was or is a previous issue.
Good Maintenance Practices - Section 1 - Bullet 1:
Brakes
Good Maintenance Practices - Section 1 - Bullet 2:
Tie rods
Good Maintenance Practices - Section 1 - Bullet 3:
Ball joints
Good Maintenance Practices - Section 1 - Bullet 4:
Tires
Good Maintenance Practices - Section 2 - Bullet 1:
Leaking oil or wetness along the body of the shock or strut.
Good Maintenance Practices - Section 2 - Bullet 2:
Broken mounts, worn or missing bushings.
Good Maintenance Practices - Section 2 - Bullet 3:
Broken, damaged, or missing mounting hardware.
Good Maintenance Practices - Section 2 - Bullet 4:
Severely dented reservoir tube, bent or scratched piston rod.
Good Maintenance Practices - Section 2 - Bullet 5:
Cupped tire wear.
Signs of Wear & Troubleshooting - Section 2 - Bull:
Your vehicle veers in side winds
Signs of Wear & Troubleshooting - Section 2 - Bull:
Your vehicle bounces excessively after hitting a bump
Signs of Wear & Troubleshooting - Section 2 - Bull:
Your vehicle bounces excessively
Signs of Wear & Troubleshooting - Section 2 - Bull:
Your vehicle bottoms out
Signs of Wear & Troubleshooting - Section 2 - Bull:
Your ride is harsh, bumpy or shaky
Signs of Wear & Troubleshooting - Section 2 - Bull:
Your vehicle leans or sways while turning
Signs of Wear & Troubleshooting - Section 2 - Head:
It could be time to replace your shocks or struts if, when driving on a surface with bumps and/or dips:
Signs of Wear & Troubleshooting - Section 3 - Bull:
If your vehicle's shocks or struts have dented or heavily scratched housings or mounts
Signs of Wear & Troubleshooting - Section 3 - Bull:
If your vehicle's height seems lower than normal when measured
Signs of Wear & Troubleshooting - Section 3 - Bull:
If you notice fluid leakage from your vehicle's shocks or struts
Good Maintenance Practices - Section 2 - Header:
To inspect your shocks and struts to gauge wear, check for:
Good Maintenance Practices - Section 2 - Bullet 7:
Defective strut bearing or missing plate.
Good Maintenance Practices - Section 2 - Bullet 6:
Damaged strut body springs, seats, and bushings.
Compressed Length (Millimeter):
377.952
Fully Open Length (in):
24.24 in
Shock Stroke (Millimeter):
237.74
Fully Open Length (mm):
615.696 mm
Country of Origin:
Mexico
Weight - Each (Gross Pounds):
07.90
Height - Each (Inch):
03.70
Length - Each (Inch):
27.70
Width - Each (Inch):
07.50



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top