×
close
click to zoom in

ACDelco 84070321 | Front ABS Wheel Speed Sensor

(No reviews yet) Write a Review
$35.99
Part Number
ACD84070321
UPC:
808709501282
Condition:
New
5 customers are viewing this product

ACDelco GM Original Equipment ABS Wheel Speed Sensors are located at each wheel, monitoring the rotation of each wheel, and are GM-recommended replacements for your vehicle's original components. The sensor provides this speed information to the antilock brake control module for the antilock braking function. These sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Chevrolet|GMC
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Manufactured with GM Original Equipment specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE
  • Restores ABS function and performance caused by failed wheel speed sensor

SPECIFICS:

Connector ColorBlack
Connector GenderFemale
Connector ShapeOval
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (in)4.3
Length (in)8.7
Length (mm)1166
Meets or Exceeds Original Equipment Manufacture SpecificationsYes
Mounting Hardware IncludedYes
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1ABS warning light is on, indicating the ABS has been deactivated due to a fault within the system.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Brake fluid leakage.
Signs of Wear & Troubleshooting - Section 1 - HeaderABS signs of wear include:
Signs of Wear & Troubleshooting - Section 2 - Bullet 1Chirping or grinding noises when braking.
Signs of Wear & Troubleshooting - Section 2 - Bullet 2Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 2 - Bullet 3A low or sinking brake pedal.
Signs of Wear & Troubleshooting - Section 2 - Bullet 4Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 2 - Bullet 5Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 2 - HeaderGeneral brake signs of wear include:
Terminal GenderMale
Terminal Quantity2
Terminal TypeBlade
Weight (lb)0.67
Width (in)5

CHAS PKG(Z85)

APPLICATIONS:

  • 2009-2012 Chevrolet Colorado - Position: Front
  • 2009-2012 GMC Canyon - Position: Front

Product type:
Aftermarket
Brand Description:
Front Wheel Speed Sensor
Mounting Hardware Included:
Yes
Connector Color:
Black
Terminal Type:
Blade
Terminal Gender:
Male
Connector Gender:
Female
Terminal Quantity:
2
Programming Required:
No
Connector Shape:
Oval
Length (Inch):
8.7
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
GM-recommended replacement part for your GM vehicle's original factory component
Features & Benefits - Bullet 4:
Manufactured with GM Original Equipment specification for fit, form, and function
Features & Benefits - Bullet 3:
Offering the quality, reliability, and durability of GM OE
Features & Benefits - Bullet 1:
Restores ABS function and performance caused by failed wheel speed sensor
Weight (lb) (Pound):
0.67
Height (in) (Inch):
4.3
Width (in) (Inch):
5
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Life Cycle Status:
Announced
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Difficulty stopping the vehicle.
Item Level GTIN:
00808709501282
Signs of Wear & Troubleshooting - Section 1 - Bull:
Chirping or grinding noises when braking.
Signs of Wear & Troubleshooting - Section 1 - Bull:
A low or sinking brake pedal.
Signs of Wear & Troubleshooting - Section 1 - Head:
General brake signs of wear include:
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Length (Millimeter):
1166
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Country of Origin:
Mexico
Weight - Each (Gross Pounds):
00.67
Height - Each (Inch):
04.30
Length - Each (Inch):
08.70
Width - Each (Inch):
05.00



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top