The ACDelco GM Original Equipment Trailer Brake Control signals a trailer's brake system when the driver presses on the brake pedal and adjusts how much braking power is needed to stop the trailer, and is a GM-recommended replacement for your vehicle's original components. This trailer brake control has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ?
| Bezel Material | ABS Plastic |
| Finish | Smooth |
| Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
| Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
| Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems. |
| Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
| Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
| Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
| Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
| Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
| Housing Color | Black Carbon |
| Material | ABS Plastic |
| Mount Plate Length (in) | 8.19 |
| Mount Plate Length (mm) | 208.09 |
| Mount Plate Width (in) | 3.5 |
| Mount Plate Width (mm) | 89.15 |
| Programming Required | No |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Chirping or grinding noises when braking. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Difficulty stopping the vehicle. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | A low or sinking brake pedal. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Brake pedal pulsation (not to be confused with normal ABS operation). |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Vehicle pulls to the left or right when brakes are applied. |
| Signs of Wear & Troubleshooting - Section 1 - Header | General brake signs of wear include: |
Hopkins
The 47284 brake control utilizes time based actuation for applying braking power to the trailer brakes. The built-in digital display makes it easy for setting braking intensity. The braking force to...
Hopkins
Designed for vehicles without tow packages, this kit contains everything needed to install a trailer brake controller. This universal kit includes: 1- 20 amp fuse and holder, 4-butt splices (3- 10/12...
Hopkins
New trucks are becoming more car-like every year making it almost impossible to install a traditional brake controller. With the InSIGHT(TM) brake control, you gain the flexibility needed to make a...
Hopkins
The 47235 brake control utilizes time based actuation for applying braking power to the trailer brakes. The built-in digital display makes it easy for setting braking intensity. The braking force to...
Hopkins
The 47225 brake control utilizes time based actuation for applying braking power to the trailer brakes. An LED indicator will glow displaying braking intensity. The bRighter the glow, the more...
