×
close
click to zoom in

ACDelco 901-074 | Front Suspension Strut Mount

(No reviews yet) Write a Review
$40.99
Part Number
ACD901-074
UPC:
707773987056
Condition:
New
5 customers are viewing this product

ACDelco Professional Suspension Strut Mount attaches your ACDelco Strut to the vehicle, while acting as an insulator. These high quality strut mounts are designed for your ACDelco Strut to ensure a better fit. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • ACDelco Professional Suspension Components share a level of quality construction with the Professional Shocks and Struts, ensuring the same level of performance from the component parts and shock or strut assemblies
  • Allows for the replacement of individual worn out suspension components without having to replace the entire shock or strut assembly
  • Chevrolet|Isuzu|Pontiac
  • Designed to fit with ACDelco shocks and struts for ease of installation and use
  • High quality suspension component which further increases the safety and comfort of your vehicle
  • Installation hardware and instructions are included with each mount for ease of use

SPECIFICS:

Good Maintenance Practices - Section 1 - Bullet 1Leaking oil or wetness along the body of the shock or strut.
Good Maintenance Practices - Section 1 - Bullet 2Broken mounts and worn or missing bushings.
Good Maintenance Practices - Section 1 - Bullet 3Broken, damaged, or missing mounting hardware.
Good Maintenance Practices - Section 1 - Bullet 4Severely dented reservoir tube and bent or scratched piston rod.
Good Maintenance Practices - Section 1 - Bullet 5Cupped tire wear.
Good Maintenance Practices - Section 1 - Bullet 6Damaged strut body springs, seats, and bushings.
Good Maintenance Practices - Section 1 - Bullet 7Defective strut bearing or missing plate.
Good Maintenance Practices - Section 1 - HeaderIf you have determined your strut to be worn out and in need of replacement, then it is very possible your suspension strut mount will need to be replaced as well. While replacing the strut or strut mount, it is a good idea to also inspect all suspension components to ensure that all damaged or worn parts are replaced. To inspect your suspension components to gauge wear, check for:
Height (in)3.6
Housing MaterialSteel
Length (in)8.3
Mounting Hardware IncludedYes
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Roll or sway in turns.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Vehicles bounces or slides sideways on a winding rough road.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Abnormal rear end 'squat' when accelerating.
Signs of Wear & Troubleshooting - Section 1 - Bullet 4Abnormal front end nose dive when braking.
Signs of Wear & Troubleshooting - Section 1 - Bullet 5Poor alignment.
Signs of Wear & Troubleshooting - Section 2 - Bullet 1Cracked and/or sagging rubber.
Signs of Wear & Troubleshooting - Section 2 - Bullet 2Corrosion.
Signs of Wear & Troubleshooting - Section 2 - Bullet 3Deformed or bent parts.
Signs of Wear & Troubleshooting - Section 2 - Bullet 4Loss of grease from sealed bearing assembly.
Signs of Wear & Troubleshooting - Section 2 - Bullet 5Signs of wear due to rubbing.
Signs of Wear & Troubleshooting - Section 2 - HeaderVisual indications of a worn suspension strut mount include:
Weight (lb)2.92
Width (in)7.6

APPLICATIONS:

  • 2005-2006 Pontiac Pursuit - Position: Front
  • 2006-2011 Chevrolet HHR - Position: Front
  • 2007-2010 Pontiac G5 - Position: Front
  • 2005-2010 Chevrolet Cobalt - Position: Front
  • 2003-2008 Isuzu Ascender - Position: Front

Product type:
Aftermarket
Brand Description:
Front Suspension Strut Mount
Mounting Hardware Included:
Yes
Programming Required:
No
Housing Material:
Steel
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
High quality suspension component which further increases the safety and comfort of your vehicle
Features & Benefits - Bullet 4:
ACDelco Professional Suspension Components share a level of quality construction with the Professional Shocks and Struts, ensuring the same level of performance from the component parts and shock or strut assemblies
Features & Benefits - Bullet 3:
Allows for the replacement of individual worn out suspension components without having to replace the entire shock or strut assembly
Features & Benefits - Bullet 1:
Installation hardware and instructions are included with each mount for ease of use
Weight (lb) (Pound):
2.92
Height (in) (Inch):
3.6
Width (in) (Inch):
7.6
Length (in) (Inch):
8.3
Signs of Wear & Troubleshooting - Section 1 - Bull:
Poor alignment.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Abnormal rear end 'squat' when accelerating.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Abnormal front end nose dive when braking.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicles bounces or slides sideways on a winding rough road.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Roll or sway in turns.
Features & Benefits - Bullet 5:
Designed to fit with ACDelco shocks and struts for ease of installation and use
Life Cycle Status:
Announced
Good Maintenance Practices - Section 1 - Bullet 1:
Leaking oil or wetness along the body of the shock or strut.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Good Maintenance Practices - Section 1 - Bullet 2:
Broken mounts and worn or missing bushings.
Item Level GTIN:
00707773987056
Good Maintenance Practices - Section 1 - Bullet 3:
Broken, damaged, or missing mounting hardware.
Good Maintenance Practices - Section 1 - Bullet 4:
Severely dented reservoir tube and bent or scratched piston rod.
Good Maintenance Practices - Section 1 - Bullet 5:
Cupped tire wear.
Good Maintenance Practices - Section 1 - Bullet 6:
Damaged strut body springs, seats, and bushings.
Good Maintenance Practices - Section 1 - Bullet 7:
Defective strut bearing or missing plate.
Signs of Wear & Troubleshooting - Section 2 - Bull:
Loss of grease from sealed bearing assembly.
Signs of Wear & Troubleshooting - Section 2 - Bull:
Deformed or bent parts.
Signs of Wear & Troubleshooting - Section 2 - Bull:
Cracked and/or sagging rubber.
Signs of Wear & Troubleshooting - Section 2 - Bull:
Corrosion.
Signs of Wear & Troubleshooting - Section 2 - Bull:
Signs of wear due to rubbing.
Signs of Wear & Troubleshooting - Section 2 - Head:
Visual indications of a worn suspension strut mount include:
Country of Origin:
China
Weight - Each (Gross Pounds):
02.92
Height - Each (Inch):
03.60
Length - Each (Inch):
08.30
Width - Each (Inch):
07.60



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top