×
close
click to zoom in

ACDelco 9726G | Spark Plug Wire Set

(No reviews yet) Write a Review
$45.04
Part Number
ACD9726G
UPC:
707773322420
Condition:
New
5 customers are viewing this product

ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Chevrolet;GMC
  • Manufactured to meet expectations for fit, form, and function
  • plug;sparks;sparkplug;sparkplugs;sparck;spark-plug;spark-plugs;coil;induction;sparking;ignition;copper;platinum;iridium;pulstar;wire;plug-wire;plug-wires;coil-wire;wire-set;spark;pliug-wire-set
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Spark Plug Wire Set

SPECIFICS:

FAQ - Answer 1Yes. The use of dielectric grease in the boot helps prevent spark flashover and allows easier boot removal in the future.
FAQ - Question 1Should grease be installed into a spark plug boot?
Good Maintenance Practices - Section 1 - Bullet 1Before purchasing and installing a spark plug wire, make sure they are the correct size and fit for your vehicle.
Good Maintenance Practices - Section 1 - Bullet 2Remove the wire by holding the boot, not the wire.
Good Maintenance Practices - Section 1 - Bullet 3Keep plug wires free from contact with other engine components.
Good Maintenance Practices - Section 1 - Bullet 4Reinstall plug wires in the original position, using correct routing and utilizing appropriate hold downs.
Good Maintenance Practices - Section 1 - Bullet 5Regularly inspect your spark plug wires for signs of damage or wear, and replace them if signs of damage are found.
Height (in)3.5
Length (in)32
Length (mm)812.8
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 4Illuminated Check Engine light
Weight (lb)0.99
Width (in)5.7

w/ Straight Boot at Distributor

APPLICATIONS:

  • 1995-1995 GMC Sonoma
  • 1995-1995 GMC Jimmy
  • 1995-1995 Chevrolet S10
  • 1995-1995 Chevrolet Blazer

Product type:
Aftermarket
Product Description:
Spark Plug Wire Set
Universal Or Specific Fit:
Specific
Programming Required:
No
Core Material:
Fiberglass Reinforced Latex Graphite
Insulation Material:
Silicone
Insulation Color:
Black
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Provides the performance and dependability you expect from ACDelco
Features & Benefits - Bullet 3:
Manufactured to meet expectations for fit, form, and function
Features & Benefits - Bullet 1:
Professional, premium aftermarket replacement
Weight (lb) (Pound):
0.99
Height (in) (Inch):
3.5
Width (in) (Inch):
5.7
Length (in) (Inch):
32
Signs of Wear & Troubleshooting - Section 1 - Bull:
Illuminated Check Engine light
FAQ - Question 1:
Should grease be installed into a spark plug boot?
FAQ - Answer 1:
Yes. The use of dielectric grease in the boot helps prevent spark flashover and allows easier boot removal in the future.
Good Maintenance Practices - Section 1 - Bullet 1:
Before purchasing and installing a spark plug wire, make sure they are the correct size and fit for your vehicle.
Good Maintenance Practices - Section 1 - Bullet 2:
Remove the wire by holding the boot, not the wire.
Life Cycle Status:
Discontinued
Good Maintenance Practices - Section 1 - Bullet 3:
Keep plug wires free from contact with other engine components.
Life Cycle Status Description:
Discontinued - Part is being removed from the product line.
Good Maintenance Practices - Section 1 - Bullet 4:
Reinstall plug wires in the original position, using correct routing and utilizing appropriate hold downs.
Item Level GTIN:
00707773322420
Good Maintenance Practices - Section 1 - Bullet 5:
Regularly inspect your spark plug wires for signs of damage or wear, and replace them if signs of damage are found.
Length (mm) (Millimeter):
812.8
Outside Diameter (Millimeter):
7
Spark Plug End Boot Quantity Angled:
4
Insulation Outside Diameter (Inch):
0.27
Spark Plug End Boot Quantity Straight:
2
Insulation Outside Diameter (Millimeter):
7
Spark Plug End Boot Color:
Brown
Coil End Boot Color:
Black
Wire Separators Included:
No
Spark Plug Boot Material:
Hi Temp Silicone
Distributor Coil End Boot Type:
Silicone Straight
Distributor Coil End Terminal Type:
Snap Lock
Spark Plug End Terminal Type:
Snap Lock
Boot Type:
Solid
Noise Suppression Type:
Yes
Country of Origin:
Mexico
Weight - Each (Gross Pounds):
00.99
Weight - Case (Gross Pounds):
05.94
Height - Each (Inch):
03.50
Height - Case (Inch):
06.80
Length - Each (Inch):
08.90
Length - Case (Inch):
18.80
Width - Each (Inch):
05.70
Width - Case (Inch):
11.80



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top