GATES
Gates K060935HD | Serpentine Belt
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented...
ACDelco Specialty Heavy Duty V-Belts have a patented EPDM rubber construction that helps provides peak performance at extreme, prolonged operating temperatures and a distinct, green gum stock built into the overcord for increased durability in heavy duty drives. ?
Color | Green/Black |
FAQ - Answer 1 | No. Knowing whether you have a manual tensioner versus an automatic tensioner is critical information as well as the type of belt used in the system The belt listed for your application is sized specific for that application. Any altering of the belt size in the drive system can lead to noise, premature wear and possible system damage. |
FAQ - Question 1 | Can I use a belt that is close to the correct size, but not the exact size? |
Good Maintenance Practices - Section 1 - Bullet 1 | Do not use belt dressings to stop belt slippage or noise. These are oil based and may cause belt deterioration. |
Good Maintenance Practices - Section 1 - Bullet 2 | Never twist a belt more than 90 degrees during inspection. This may damage the tensile cords and cause premature failure. |
Good Maintenance Practices - Section 1 - Bullet 3 | Replace belt per your equipment's owner's manual. |
Good Maintenance Practices - Section 1 - Bullet 4 | Use an approved tension gauge to check belt tension. |
Good Maintenance Practices - Section 1 - Bullet 5 | Check for proper belt tension per your equipment's owner's manual. |
Material | Reinforced EPDM Rubber |
Measurements | 13/16 in x 94 |
Programming Required | No |
Rib Quantity | 6 |
Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Material loss |
Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Glazing on belt |
Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Pilling, abrasion, or cracking belt |
Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Squealing noise from belt |
Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Engine stoppings or backfiring |
Signs of Wear & Troubleshooting - Section 1 - Bullet 6 | Loss of battery charge |
Signs of Wear & Troubleshooting - Section 1 - Header | Signs of wear include but are not limited to: |