This BladeRunner Intercooler represents the next generation of intercoolers. Designed specifically for the 2012-2016 BMW 328i (F3X) 12-16 L4-2.0L (t) with the N20 engine, this BladeRunner intercooler utilizes a 5" bar and plate core design. This design outflows the factory fin core design, while the 3/16" TIG-Welded end tanks offer superior strength and durability. In testing, this intercooler showed flow gains up to 17% and lowered the intake air temperatures. End Tanks: The unique BladeRunner end tanks are constructed out of 3/16" thick aluminum plates and include two 1/8" NPT ports for sensors or water-methanol injection. 5" Bar and Plate Core Design: The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the factory. TIG-Welded: 100% TIG-Welded inside and out by a certified craftsmen for strength and durability. TIG-Welding provides the strongest welds while reducing stress cracks. Pressure Tested: The BladeRunner Intercooler is test pressure rated at 200psi. Perfect Fit: Utilizes the factory mounting locations for a hassle-free installation. The intercooler and tubes utilize billet factory style quick connects to assure a leak-free connection.
| Intake Pipe Material | Aluminum |
| Overall Length | N/A |
| WARNING CA Proposition 65 | Yes |
| WARNING CA Proposition 65 Message | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
WARNINGThis product can expose you to chemicals, including WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Advanced FLOW Engineering
Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3 in. bar and plate design that out performs OE style tube and fin core designs. The...
Advanced FLOW Engineering
This BladeRunner Intercooler represents the next generation of intercoolers. The BladeRunner intercoolers utilize a 3.15 thick bar and plate design that is 44% larger than stock and outflows OE style...
Advanced FLOW Engineering
Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3 in. bar and plate design that out performs OE style tube and fin core designs. The...
Advanced FLOW Engineering
This BladeRunner Intercooler represents the next generation of intercoolers. Designed specifically for the 2014-2017 BMW 328d/dx (F30/F31) L4-2.0L (td) with the N47 engine, this BladeRunner...
Advanced FLOW Engineering
Specifications: Compressor Inducer - 59.9 mm, Compressor Exducer - 85.0 mm / Trim: 49.0, Turbine Inducer - 69.8 mm, Turbine Exducer - 76.2 / Trim: 83.9 mm, Turbine Housing: 1.15Billet Wheel: The...
