×
close
click to zoom in

BMR Suspension SB012R | Coil Spring / Tie Rod Sleeve / Stabilizer Bar Kit

(No reviews yet) Write a Review
$249.95
Part Number
BMRSB012R
UPC:
887753325877
Condition:
New
5 customers are viewing this product

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension?s SB012 front sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 29mm DOM tubing, the SB012 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection. The sway bar is 2-way adjustable to tune the amount of torsional spring rate and to determine the handling characteristics (understeer/oversteer) of the vehicle.

BRAND: BMR Suspension

FEATURES:

  • BMR Suspension - SB012R
  • BMR Suspension designed the SB012 sway bar kit for street performance, autocross, and road race applications.
  • Fits Pontiac G8;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;87%-137% increase in sway bar rate;Cold formed to better resist torsional fatigue;Manufactured from 29mm heavy-wall DOM tubing for increased strength;Two-way adjustable for street and track use;Adjustability allows for fine-tuning of suspension;88-durometer, greasable polyurethane bushing;Zinc-plated inner sleeves;Durable powdercoat finish;1-2-hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.
  • Sway Bar Kit With Bushings, Front, Adjustable, Hollow 29mm

SPECIFICS:

Front Sway Bar Adjustable2-position
Front Sway Bar Diameter (in)1.125 inches
Front Sway Bar Diameter (mm)29.0 mm
Front Sway Bar TypeHollow
Mounting Hardware IncludedNo
PositionFront
QuantitySold as a kit
Sway Bar FinishRed powdercoated
Sway Bar MaterialSteel

FrontWARRANTY TIME: 3 Months

APPLICATIONS:

  • 2008-2009 Pontiac G8
  • 2014-2017 Chevrolet SS

Product type:
Aftermarket
Brand Description:
Sway Bar Kit With Bushings, Front, Adjustable, Hollow 29mm
Product Description:
BMR Suspension designed the SB012 sway bar kit for street performance, autocross, and road race applications.
Associated Comment:
Fits Pontiac G8;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;87%-137% increase in sway bar rate;Cold formed to better resist torsional fatigue;Manufactured from 29mm heavy-wall DOM tubing for i
OE Part Number:
SB012R
Quantity:
Sold as a kit
Front Sway Bar Type:
Hollow
Mounting Hardware Included:
No
Short Description:
Sway Bar Kit
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
13.0000
Life Cycle Status:
Available To Order
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Item Level GTIN:
00887753325877
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top