×
close
click to zoom in

BMR Suspension SB049H | Chevrolet Camaro Coil Spring / Tie Rod Sleeve / Stabilizer Bar Kit

(No reviews yet) Write a Review
$509.95
Part Number
BMRSB049H
UPC:
887753326355
Condition:
New
5 customers are viewing this product

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension?s SB049 front and rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty 1.25-inch (front) and 1.25-inch (rear) DOM steel tubing, the SB049 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. Thrust washers are welded to the front bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering maneuvers The SB049 attaches to your Sixth Gen Camaro with polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing.

BRAND: BMR Suspension

FEATURES:

  • BMR Suspension - SB049H
  • BMR Suspension designed the SB049 sway bar kit for street performance, autocross, and road race applications.
  • Fits 2016-Newer Chevrolet Camaro(excluding cars with ELSD);Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;62% increase in sway bar rate (front), 52% increase in sway bar rate (rear);Cold formed to better resist torsional fatigue;Manufactured from 1.25-inch heavy-wall DOM tubing for increased strength;88-durometer, greasable polyurethane bushings;Zinc-plated inner sleeves;Billet aluminum, black anodized bushings saddles;Durable powdercoat finish;3-4 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.
  • Sway Bar Kit With Bushings, Front And Rear, Non-adjustable

SPECIFICS:

Front Sway Bar AdjustableFixed
Front Sway Bar Diameter (in)1.25 inches
Front Sway Bar Diameter (mm)32.0 mm
Front Sway Bar TypeHollow
Mounting Hardware IncludedYes
PositionFront and rear
QuantitySold as a kit
Rear Sway Bar AdjustableFixed
Rear Sway Bar Diameter (in)1.25 inches
Rear Sway Bar Diameter (mm)32.0 mm
Rear Sway Bar TypeHollow
Sway Bar FinishBlack hammertone powdercoated
Sway Bar MaterialSteel

Front_RearWARRANTY TIME: 3 Months

APPLICATIONS:

  • 2016-2020 Chevrolet Camaro

Product type:
Aftermarket
Brand Description:
Sway Bar Kit With Bushings, Front And Rear, Non-adjustable
Product Description:
BMR Suspension designed the SB049 sway bar kit for street performance, autocross, and road race applications.
Associated Comment:
Fits 2016-Newer Chevrolet Camaro(excluding cars with ELSD);Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;62% increase in sway bar rate (front), 52% increase in sway bar rate (rear);Cold formed t
OE Part Number:
SB049H
Quantity:
Sold as a kit
Front Sway Bar Type:
Hollow
Mounting Hardware Included:
Yes
Rear Sway Bar Type:
Hollow
Short Description:
Sway Bar Kit
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
27.0000
Life Cycle Status:
Available To Order
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Item Level GTIN:
00887753326355
Quantity Per Application:
1



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top