HOLSTEIN
HOLSTEIN 2ABS2526 | Cadillac SRX Rear Right ABS Wheel Speed Sensor
BRAND: HOLSTEINFEATURES:Holstein Parts ABS Wheel Speed SensorCadillac SRX (2010-2016)10-16 Cadillac SRX (2.8, 3.0, 3.6) ABS Wheel Speed Sensor - Rear...
ACDelco GM Original Equipment ABS Wheel Speed Sensors are located at each wheel, monitoring the rotation of each wheel, and are GM-recommended replacements for your vehicle's original components. The sensor provides this speed information to the antilock brake control module for the antilock braking function. These sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ?
Connector Color | Black |
Connector Gender | Female |
Connector Shape | Square |
Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems. |
Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
Height (in) | 1.7 |
Length (in) | 36.2 |
Length (mm) | 907.02 |
Meets or Exceeds Original Equipment Manufacture Specifications | Yes |
Mounting Hardware Included | Yes |
Programming Required | No |
Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Chirping or grinding noises when braking. |
Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Difficulty stopping the vehicle. |
Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | A low or sinking brake pedal. |
Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Brake pedal pulsation (not to be confused with normal ABS operation). |
Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Vehicle pulls to the left or right when brakes are applied. |
Signs of Wear & Troubleshooting - Section 1 - Header | General brake signs of wear include: |
Terminal Gender | Male |
Terminal Quantity | 2 |
Terminal Type | Pin |
Weight (lb) | 0.13 |
Width (in) | 2.4 |