This Competition wet sump is for '86 and newer Small Block Chevys with one piece seal. It is designed for applications where the engine is set extra low in the chassis. Fits front steer chassis with both aftermarket and Camaro front ends. The pan has a 6-1/2" deep, 15" wide, 12" long sump, and a 7 quart system capacity. Requires one of our pickups.
| Baffled | Yes |
| Capacity | 7 Quart System Capacity |
| Crank Scraper Included | Yes |
| Dipstick Port | Yes |
| Drain Plug Included | Yes |
| Engine | For S.B. Chevy 1986 and newer blocks with one piece seal |
| Feature 1 | Baffled with 6 Trap Doors/3 Directional Runners |
| Feature 2 | Bolt On Slosh Baffle For Oil Control |
| Feature 3 | Removable Screen Windage Tray and Built in Crank Scraper |
| Feature 4 | Reduces Crank Windage And Saves Horsepower |
| Feature 5 | Provision for Canton Pan Mounted Dipstick |
| Feature 6 | 1/2 NPT Temp Sensor Bung |
| Feature 7 | Magnetic Drain Plug |
| Finish | Silver Plating |
| Gasket or Seal Included | No |
| Hardware Included | No |
| Kicked Out | Yes |
| Material | Steel |
| Pickup Included | No |
| Recommended Accessory 1 | 20-030 - Pickup for Small Block Standard Volume Pumps M55 & M55A |
| Recommended Accessory 2 | 20-031 - Pickup for Small Block High Volume Pumps M55HV |
| Recommended Accessory 3 | 20-032 - Pickup for Small Block Standard Volume Pumps M155 w/ 3/4" Tube |
| Recommended Accessory 4 | 20-850 - Universal Dipstick Kit 1/4? N.P.T. Fitting |
| Recommended Accessory 5 | 20-854 - Universal Steel Braided Dipstick Kit 1/4" N.P.T. Fitting |
| Recommended Accessory 6 | 88-100T - SBC '86+ Oil Pan Gasket |
| Windage Tray Included | Yes |
Canton
This competition wet sump is for '80-'85 Small Block Chevys with right side dipstick. It is designed for x-member clearance in street stock and late models using ?78 and newer G body GM chassis...
Canton
This competition wet sump is for pre-?80 small block Chevys with left side dipstick. It is designed for x-member clearance in street stock and late models using ?78 and newer G body GM chassis...
Canton
This circle track stock appearing pan is for pre-?80 Small Block Chevys with left side dipstick. It is designed for circle track applications where a stock appearing oil pan is required, such as...
Canton
This open chassis "L" style steel wet sump is for ?85 and earlier Small Block Chevys with left or rear mounted starters. This oil pan is designed for chassis without x-members under the engine...
Canton
This Ford left turn rear sump is for ?74-97 2300cc ohc engines in Fox bodies, rear sump Pinto chassis, and mini-modifieds. It has a 7" deep, 11" wide, 8-1/2" long sump that holds 5 quarts and has a...
