This Competition wet sump is for pre-'80 Small Block Chevys with left side dipstick. Fits front steer chassis with both aftermarket and Camaro front ends, others when the engine is moved. It has a 7" deep, 15" wide, 12" long sump, and an 8 quart system capacity. Will work with all starter and flywheel combinations. Requires one of our pickups.
| Baffled | Yes |
| Capacity | 8 Quart System Capacity |
| Crank Scraper Included | Yes |
| Dipstick Port | Yes |
| Drain Plug Included | Yes |
| Engine | For S.B. Chevy Pre-1980 Blocks |
| Feature 1 | Baffled with 6 Trap Doors/3 Directional Runners |
| Feature 2 | Bolt On Slosh Baffle For Oil Control |
| Feature 3 | Removable Screen Windage Tray and Built in Crank Scraper |
| Feature 4 | Reduces Crank Windage And Saves Horsepower |
| Feature 5 | Provision for Canton Pan Mounted Dipstick |
| Feature 6 | 1/2 NPT Temp Sensor Bung |
| Feature 7 | Magnetic Drain Plug |
| Finish | Silver Plating |
| Gasket or Seal Included | No |
| Hardware Included | No |
| Kicked Out | Yes |
| Material | 16 Gauge Steel |
| Pickup Included | No |
| Recommended Accessory 1 | 20-040 - Pickup for Small Block Standard Volume Pumps M55 & M55A |
| Recommended Accessory 2 | 20-042 - Pickup for Small Block Standard Volume Pumps M155 w/ 3/4" Tube |
| Recommended Accessory 3 | 20-070 - Pickup for Small Block High Volume Pumps M55HV |
| Recommended Accessory 4 | 20-072 - Pickup for Small block High Volume M155HV Pump w/ 3/4" Tube |
| Recommended Accessory 5 | 20-077 - Press In Pickup for M10552 & M10555 Pump |
| Recommended Accessory 6 | 20-071 - Flange Mount Pickup for M10552 & M10555 Pump |
| Recommended Accessory 7 | 20-100 - Pickup for Big Block 5 bolt pumps M77 & M77HV |
| Recommended Accessory 8 | 20-850 - Universal Dipstick Kit 1/4? N.P.T. Fitting |
| Recommended Accessory 9 | 20-854 - Universal Steel Braided Dipstick Kit 1/4" N.P.T. Fitting |
| Stoke | 3.75 inches |
| Windage Tray Included | Yes |
Canton
This Small Block Chevy "T" sump drag race oil pan is for pre-?80 blocks with a left side dipstick. It has a 7-1/2" deep, 9-1/2" long by 10-1/2" wide sump and an 7 qt system capacity. This pan...
Canton
This Competition wet sump is for pre-'80 Small Block Chevys with left side dipstick. It is designed for applications where the engine is set extra low in the chassis. Fits front steer chassis with...
Canton
This circle track stock appearing pan is for pre-?80 Small Block Chevys with left side dipstick. It is designed for circle track applications where a stock appearing oil pan is required, such as...
Canton
This Circle Track stock appearing rear sump is for ?74-`97 2300cc OHC Ford engines. It is stock depth with a 5 quart system capacity. Stock dimensions are capacity are retained, but Canton's...
Canton
This SBC competition open chassis wet sump is for ?85 and earlier Small Block Chevys. It is designed for chassis without any x-members under the engine (asphalt and dirt modifieds, sprint cars, and...
