This Competition wet sump is for '80-'85 Small Block Chevys with right side dipstick. Fits front steer chassis with both aftermarket and Camaro front ends, others when the engine is moved. It has a 7" deep, 15" wide, 12" long sump, and an 8 quart system capacity. Will work with all starter and flywheel combinations. Requires one of our pickups.
| Baffled | Yes |
| Capacity | 8 Quart System Capacity |
| Crank Scraper Included | Yes |
| Dipstick Port | Yes |
| Drain Plug Included | Yes |
| Engine | For S.B. Chevy 1980-85 Blocks with right side dipstick |
| Feature 1 | Baffled with 6 Trap Doors/3 Directional Runners |
| Feature 2 | Bolt On Slosh Baffle For Oil Control |
| Feature 3 | Removable Screen Windage Tray and Built in Crank Scraper |
| Feature 4 | Reduces Crank Windage And Saves Horsepower |
| Feature 5 | Provision for Canton Pan Mounted Dipstick |
| Feature 6 | 1/2 NPT Temp Sensor Bung |
| Feature 7 | Magnetic Drain Plug |
| Finish | Silver Plating |
| Gasket or Seal Included | No |
| Hardware Included | No |
| Kicked Out | Yes |
| Material | 16 Gauge Steel |
| Pickup Included | No |
| Recommended Accessory 1 | 20-040 - Pickup for Small Block Standard Volume Pumps M55 & M55A |
| Recommended Accessory 2 | 20-042 - Pickup for Small Block Standard Volume Pumps M155 w/ 3/4" Tube |
| Recommended Accessory 3 | 20-070 - Pickup for Small Block High Volume Pumps M55HV |
| Recommended Accessory 4 | 20-072 - Pickup for Small block High Volume M155HV Pump w/ 3/4" Tube |
| Recommended Accessory 5 | 20-077 - Press In Pickup for M10552 & M10555 Pump |
| Recommended Accessory 6 | 20-071 - Flange Mount Pickup for M10552 & M10555 Pump |
| Recommended Accessory 7 | 20-100 - Pickup for Big Block 5 bolt pumps M77 & M77HV |
| Recommended Accessory 8 | 20-850 - Universal Dipstick Kit 1/4? N.P.T. Fitting |
| Recommended Accessory 9 | 20-854 - Universal Steel Braided Dipstick Kit 1/4" N.P.T. Fitting |
| Stoke | 3.75 inches |
| Windage Tray Included | Yes |
Canton
This open chassis shallow "L" style steel wet sump is for pre-?85 Small Block Chevys. The pan is designed for applications requiring extra ground clearance and with chassis without any x-members...
Canton
This oil pan is the perfect solution for Honda K series motors. Notched to fit most production chassis this pan provides superior oiling control over the stock pan. This pan may require some cross...
Canton
This rear sump truck pan is for all Ford 4WD trucks and vans with 429-460 blocks. It has 10-3/4" deep by 10-1/2" long sump with an 8 quart system capacity. Will not clear crossover exhaust. Designed...
Canton
Cantons new 15-738 Ford 5.0 Coyote oil pan is designed for early Ford chassis and others that required a front sump oil pan. The pan is designed with a ?t?sump for extra capacity and is used in road...
Canton
This Fox Body drag race pro-style power pan is for Ford 289-302 blocks. It has a 9" deep by 7" long by 11" wide rear sump and a 7 qt. system capacity. The front sump is 6-1/2" deep. The large oil...
