This open chassis "L" style steel wet sump pan is for ?85 and earlier Small Block Chevys. It is designed for chassis without x-members under the engine (asphalt and dirt modifieds, sprint cars, and some late models). It has an 11-1/2" wide, 16" long, 7" deep ?L? sump with a 9 quart system capacity. Requires use of one of our pickups and an offset aftermarket starter with a 153 or 168 tooth flywheel. Also an available option for this pan is #20-914 Pro Louvered Windage Tray, designed to replace the standard screen tray in this pan.
| Baffled | Yes |
| Capacity | 9 Quart System Capacity |
| Crank Scraper Included | No |
| Dipstick Port | Yes |
| Drain Plug Included | Yes |
| Engine | For S.B. Chevy 1985 and earlier blocks |
| Feature 1 | Pro-Style Oil Recovery Pouch Extends Right Side of Pan Away From Crankshaft |
| Feature 2 | Recovery Pouch Thins Out Atmosphere of Oil in Crankcase and Frees up Horsepower |
| Feature 3 | Baffled with 6 Trap Doors/3 Directional Runners |
| Feature 4 | Bolt On Slosh Baffle For Oil Control |
| Feature 5 | Removable Screen Windage Tray |
| Feature 6 | Provision for Canton Pan Mounted Dipstick |
| Feature 7 | 1/2 NPT Temp Sensor Bung |
| Feature 8 | Magnetic Drain Plug |
| Finish | Silver Plating |
| Gasket or Seal Included | No |
| Hardware Included | No |
| Kicked Out | Yes |
| Material | 16 Gauge Steel |
| Pickup Included | No |
| Recommended Accessory 1 | 20-040 - Pickup for Small Block Standard Volume Pumps M55 & M55A |
| Recommended Accessory 2 | 20-042 - Pickup for Small Block Standard Volume Pumps M155 w/ 3/4" Tube |
| Recommended Accessory 3 | 20-070 - Pickup for Small Block High Volume Pumps M55HV |
| Recommended Accessory 4 | 20-072 - Pickup for Small block High Volume M155HV Pump w/ 3/4" Tube |
| Recommended Accessory 5 | 20-077 - Press In Pickup for M10552 & M10555 Pump |
| Recommended Accessory 6 | 20-071 - Flange Mount Pickup for M10552 & M10555 Pump |
| Recommended Accessory 7 | 20-100 - Pickup for Big Block 5 bolt pumps M77 & M77HV |
| Recommended Accessory 8 | 20-850 - Universal Dipstick Kit 1/4? N.P.T. Fitting |
| Recommended Accessory 9 | 20-854 - Universal Steel Braided Dipstick Kit 1/4" N.P.T. Fitting |
| Stoke | 3.875 |
| Windage Tray Included | Yes |
Canton
This circle track stock appearing pan is for pre-?80 Small Block Chevys with left side dipstick. It is designed for circle track applications where a stock appearing oil pan is required, such as...
Canton
This Circle Track stock appearing rear sump is for ?74-`97 2300cc OHC Ford engines. It is stock depth with a 5 quart system capacity. Stock dimensions are capacity are retained, but Canton's...
Canton
This SBC competition open chassis wet sump is for ?85 and earlier Small Block Chevys. It is designed for chassis without any x-members under the engine (asphalt and dirt modifieds, sprint cars, and...
Canton
This Competition wet sump is for pre-'80 Small Block Chevys with left side dipstick. It is designed for applications where the engine is set extra low in the chassis. Fits front steer chassis with...
Canton
This Competition wet sump is for pre-'80 Small Block Chevys with left side dipstick. Fits front steer chassis with both aftermarket and Camaro front ends, others when the engine is moved. It has a 7"...
