This open chassis shallow "L" style steel wet sump is for pre-?85 Small Block Chevys. The pan is designed for applications requiring extra ground clearance and with chassis without any x-members under the engine (asphalt and dirt modifieds, sprint cars, and some late models). It has a 16" long, 6-1/2" deep ?L? sump with an 8 quart system capacity. Requires one of our pickups. Also an available option for this pan is #20-914 Pro Louvered Windage Tray, designed to replace the standard screen tray in this pan.
| Baffled | Yes |
| Capacity | 8 Quart System Capacity |
| Crank Scraper Included | No |
| Dipstick Port | Yes |
| Drain Plug Included | Yes |
| Engine | For S.B. Chevy 1985 and earlier blocks |
| Feature 1 | Pro-Style Oil Recovery Pouch Extends Right Side of Pan Away From Crankshaft |
| Feature 2 | Recovery Pouch Thins Out Atmosphere of Oil in Crankcase and Frees up Horsepower |
| Feature 3 | Baffled with 6 Trap Doors/3 Directional Runners |
| Feature 4 | Bolt On Slosh Baffle For Oil Control |
| Feature 5 | Removable Screen Windage Tray |
| Feature 6 | Provision for Canton Pan Mounted Dipstick |
| Feature 7 | 1/2 NPT Temp Sensor Bung |
| Feature 8 | Magnetic Drain Plug |
| Finish | Silver Plating |
| Gasket or Seal Included | No |
| Hardware Included | No |
| Kicked Out | Yes |
| Material | 16 Gauge Steel |
| Pickup Included | No |
| Recommended Accessory 1 | 20-030 - Pickup for Small Block Standard Volume Pumps M55 & M55A |
| Recommended Accessory 2 | 20-031 - Pickup for Small Block High Volume Pump M55HV |
| Recommended Accessory 3 | 20-032 - Pickup for Small Block Standard Volume M155 Pump with 3/4" Inlet |
| Recommended Accessory 4 | 20-850 - Universal Dipstick Kit 1/4" N.P.T. Fitting |
| Recommended Accessory 5 | 20-854 - Universal Steel Braided Dipstick Kit 1/4" N.P.T Fitting |
| Recommended Accessory 6 | 88-100 ? SBC Pre ?85 Oil Pan Gasket |
| Stoke | 3.875" |
| Windage Tray Included | Yes |
Canton
This competition wet sump is for '80-'85 Small Block Chevys with right side dipstick. It is designed for x-member clearance in street stock and late models using ?78 and newer G body GM chassis...
Canton
This competition wet sump is for pre-?80 small block Chevys with left side dipstick. It is designed for x-member clearance in street stock and late models using ?78 and newer G body GM chassis...
Canton
This circle track stock appearing pan is for pre-?80 Small Block Chevys with left side dipstick. It is designed for circle track applications where a stock appearing oil pan is required, such as...
Canton
This open chassis "L" style steel wet sump is for ?85 and earlier Small Block Chevys with left or rear mounted starters. This oil pan is designed for chassis without x-members under the engine...
Canton
This Ford left turn rear sump is for ?74-97 2300cc ohc engines in Fox bodies, rear sump Pinto chassis, and mini-modifieds. It has a 7" deep, 11" wide, 8-1/2" long sump that holds 5 quarts and has a...
