This circle track oil pan is for use on pre?85 blocks SBC motors. It?s shallow 6 ?? depth and L-sump design make it ideal for many applications. The sump features a six trap door baffle, oil recovery pouch, built in louvered windage tray,
| Baffled | Yes |
| Capacity | 6.5 Quart System Capacity |
| Crank Scraper Included | No |
| Dipstick Port | Yes |
| Drain Plug Included | Yes |
| Engine | For S.B. Chevy 1985 and earlier blocks |
| Feature 1 | Oil Recovery Pouch Extends Right Side of Pan Away From Crankshaft |
| Feature 2 | Recovery Pouch Thins Out Atmosphere of Oil in Crankcase and Frees up Horsepower |
| Feature 3 | Baffled with 6 Trap Doors/3 Directional Runners |
| Feature 4 | Bolt On Slosh Baffle For Oil Control |
| Feature 5 | Removable Louvered Windage Tray |
| Feature 6 | Provision for Canton Pan Mounted Dipstick |
| Feature 7 | 1/2 NPT Temp Sensor Bung |
| Feature 8 | Magnetic Drain Plug |
| Finish | Silver Plating |
| Gasket or Seal Included | No |
| Hardware Included | No |
| Kicked Out | Yes |
| Material | 16 Gauge Steel |
| Pickup Included | No |
| Recommended Accessory 1 | 20-036 - Pickup for Small Block Standard Volume Pump M55 & M55A |
| Recommended Accessory 10 | 88-100T ? SBC 86'+ Oil Pan Gasket |
| Recommended Accessory 2 | 20-031 - Pickup for Small Block High Volume Pump M55HV |
| Recommended Accessory 3 | 20-032 - Pickup for Small Block Standard Volume M155 Pump with 3/4" Inlet |
| Recommended Accessory 4 | M-55 - SBC Standard Volume Oil Pump |
| Recommended Accessory 5 | M-55A - SBC Standard Volume High Pressure Oil Pump |
| Recommended Accessory 6 | M-55HV - SBC High Volume Oil Pump |
| Recommended Accessory 7 | M-155 - SBC Standard Volume Oil Pump with 3/4" Inlet |
| Recommended Accessory 8 | 20-850 - Universal Dipstick Kit 1/4" N.P.T. Fitting |
| Recommended Accessory 9 | 20-854 - Universal Steel Braided Dipstick Kit 1/4" N.P.T Fitting |
| Windage Tray Included | Yes |
Canton
This circle track stock appearing pan is for pre-?80 Small Block Chevys with left side dipstick. It is designed for circle track applications where a stock appearing oil pan is required, such as...
Canton
This Circle Track stock appearing rear sump is for ?74-`97 2300cc OHC Ford engines. It is stock depth with a 5 quart system capacity. Stock dimensions are capacity are retained, but Canton's...
Canton
This SBC competition open chassis wet sump is for ?85 and earlier Small Block Chevys. It is designed for chassis without any x-members under the engine (asphalt and dirt modifieds, sprint cars, and...
Canton
This Competition wet sump is for pre-'80 Small Block Chevys with left side dipstick. It is designed for applications where the engine is set extra low in the chassis. Fits front steer chassis with...
Canton
This Competition wet sump is for pre-'80 Small Block Chevys with left side dipstick. Fits front steer chassis with both aftermarket and Camaro front ends, others when the engine is moved. It has a 7"...
