This Circle Track stock appearing rear sump is for ?74-`97 2300cc OHC Ford engines. It is stock depth with a 5 quart system capacity. Stock dimensions are capacity are retained, but Canton's specially designed baffling system ensures increased oil control. This pan requires a 11-911 pickup.
| Baffled | Yes |
| Capacity | Stock System Capacity |
| Crank Scraper Included | Yes |
| Dipstick Port | No |
| Drain Plug Included | Yes |
| Engine | For Ford '74-'97 2300cc ohc engines |
| Feature 1 | Baffled with 3 Trap Doors and Directional Runners |
| Feature 2 | Bolt On Windage / Anti-Slosh Baffle For Oil Control |
| Feature 3 | Built in Crank Scraper |
| Finish | Silver Plating |
| Gasket or Seal Included | No |
| Hardware Included | No |
| Kicked Out | Yes |
| Material | 16 Gauge Steel |
| Pickup Included | No |
| Recommended Accessory 1 | 11-911 - Pickup for 11-900 |
| Stoke | 3.126 inches |
| Windage Tray Included | No |
Canton
This circle track stock appearing pan is for pre-?80 Small Block Chevys with left side dipstick. It is designed for circle track applications where a stock appearing oil pan is required, such as...
Canton
This SBC competition open chassis wet sump is for ?85 and earlier Small Block Chevys. It is designed for chassis without any x-members under the engine (asphalt and dirt modifieds, sprint cars, and...
Canton
This Competition wet sump is for pre-'80 Small Block Chevys with left side dipstick. It is designed for applications where the engine is set extra low in the chassis. Fits front steer chassis with...
Canton
This competition wet sump is for pre-?80 small block Chevys with left side dipstick. It is designed for x-member clearance in street stock and late models using ?78 and newer G body GM chassis...
Canton
This competition wet sump is for '80-'85 Small Block Chevys with right side dipstick. It is designed for x-member clearance in street stock and late models using ?78 and newer G body GM chassis...
