This Drag Race Oil Pan is for pre-?85 Small Block Chevys with left side dipstick. It has an 8" deep by 9-1/2" long by 10-1/2" wide sump and a 7 qt. system capacity. Works with an aftermarket starter and a 153 or 168 tooth flywheel. This pan requires one of our pickups.
| Baffled | Yes |
| Capacity | 7 Quart System Capacity |
| Crank Scraper Included | Yes |
| Dipstick Port | Yes |
| Drain Plug Included | Yes |
| Engine | For S.B. Chevy Pre-1980 Blocks |
| Feature 1 | Oil Recovery Pouch Extends Right Side of Pan Away From Crankshaft |
| Feature 2 | Recovery Pouch Thins Out Atmosphere of Oil in Crankcase and Frees up Horsepower |
| Feature 3 | Features Competition Oil Recovery System |
| Feature 4 | Removable Louvered Windage Tray |
| Feature 5 | Built in Crank Scraper |
| Feature 6 | Trap Door Baffle For Oil Control |
| Feature 7 | Provision for Canton Pan Mounted Dipstick |
| Feature 8 | Magnetic Drain Plug |
| Finish | Silver Plating |
| Gasket or Seal Included | No |
| Hardware Included | No |
| Kicked Out | Yes |
| Material | 16 Gauge Steel |
| Pickup Included | No |
| Recommended Accessory 1 | 20-050 - Pickup for Small Block Standard Volume Pumps M55 & M55A |
| Recommended Accessory 2 | 20-055 - Pickup for Small Standard Volume Pump M155 w/ 3/4" Inlet |
| Recommended Accessory 3 | 20-080 - Pickup for Small Block High Volume Pump M55HV |
| Recommended Accessory 4 | 20-081 - Bolt-On Pickup for Melling 105552 & 10555 Pumps |
| Recommended Accessory 5 | 20-082 - Press-in Pickup for Melling 105552 & 10555 Pump |
| Recommended Accessory 6 | 20-085 - Pickup for Small Block High Volume M155HV Pump w/ 3/4" Inlet |
| Recommended Accessory 7 | 20-850 - Universal Dipstick Kit 1/4? N.P.T. Fitting |
| Recommended Accessory 8 | 20-854 - Universal Steel Braided Dipstick Kit 1/4" N.P.T. Fitting |
| Stoke | 3.875 inches |
| Sump Depth | 8 inches |
| Sump Width | 10.5 inches |
| Windage Tray Included | Yes |
Canton
This Fox Body drag race pro-style power pan is for Ford 289-302 blocks. It has a 9" deep by 7" long by 11" wide rear sump and a 7 qt. system capacity. The front sump is 6-1/2" deep. The large oil...
Canton
This Small Block Chevy "T" sump drag race oil pan is for pre-?80 blocks with a left side dipstick. It has a 8-1/2" deep, 9-1/2" long by 10-1/2" wide sump and an 8 qt system capacity. Clears a 3.875"...
Canton
This bracket drag race oil pan is for Small Block Chevy pre-?80 blocks with left side dipstick and is designed to fit most stock chassis. It has an 8" deep by 9-1/2" long sump and a 6 qt. system...
Canton
This pan is for GM LS1/LS6 powered cars that need a rear sump drag race oil pan and owners of 98+ F-Body chassis looking to install a GM LS1/LS6 engine in their car.BRAND: CantonFEATURES:Canton...
Canton
This bracket drag race oil pan is for Small Block Chevy ?80 to ?85 blocks with right side dipstick and is designed to fit most stock chassis. It has an 8" deep by 9-1/2" long sump and a 6 qt. system...
