This Small Block Chevy "T" sump drag race oil pan is for pre-?80 blocks with a left side dipstick. It has a 7-1/2" deep, 9-1/2" long by 10-1/2" wide sump and an 7 qt system capacity. This pan requires a short oil filter, and one of our pickups. Will work with stock or aftermarket starters.
| Baffled | Yes |
| Capacity | 6 Quart System Capacity |
| Crank Scraper Included | Yes |
| Dipstick Port | No |
| Drain Plug Included | Yes |
| Engine | For S.B. Chevy Pre-1980 Blocks |
| Feature 1 | Features Competition Oil Recovery System |
| Feature 2 | Removable Screen Windage Tray |
| Feature 3 | Built in Crank Scraper |
| Feature 4 | Trap Door Baffle For Oil Control |
| Feature 5 | Magnetic Drain Plug |
| Finish | Silver Plating |
| Gasket or Seal Included | No |
| Hardware Included | No |
| Kicked Out | Yes |
| Material | 16 Gauge Steel |
| Pickup Included | No |
| Recommended Accessory 1 | 20-010 - Pickup for Small Block Standard Volume Pumps M55 & M55A |
| Recommended Accessory 2 | 20-013 - Pickup for Small Block Standard Volume M155 Pump with 3/4" Inlet |
| Recommended Accessory 3 | 20-020 - Pickup for Small Block High Volume M55HV Pump |
| Recommended Accessory 4 | 20-023 - Pickup for Small Block High Volume M155HV Pump w/ 3/4" Inlet |
| Recommended Accessory 5 | 20-021 - Bolt-On Pickup for Melling M10555 Pumps |
| Recommended Accessory 6 | 88-100 ? SBC Pre ?85 Oil Pan Gasket |
| Stoke | 3.875 inches |
| Sump Depth | 7.5 inches |
| Sump Width | 10.5 inches |
| Windage Tray Included | Yes |
Canton
This Competition wet sump is for pre-'80 Small Block Chevys with left side dipstick. Fits front steer chassis with both aftermarket and Camaro front ends, others when the engine is moved. It has a 7"...
Canton
This drag race oil pan is for BBC Mark 4 blocks. It has an 8" deep by 10" long and 11-3/4" wide sump and an 8qt. system capacity. Takes up to a 4.5" stroke with a steel rod. This pan requires our...
Canton
This BBC bracket drag oil pan is for Mark 4 blocks. It has a 9" deep by 9-1/2" long sump and a 7 qt. system capacity. Takes up to a 4.5" stroke with a steel rod. This pan requires our 20-190 pickup...
Canton
This bracket drag race oil pan is for Dart/Rocket aluminum and iron, spread rail blocks. It has an 8-1/4" deep by 9-1/2" long by 8-1/2" wide sump with a 6 qt. system capacity. Clears a 4.25" stroke...
Canton
This bracket drag race stroker oil pan is for Small Block Chevy pre-?85 blocks with a two piece rear main. It is designed to fit most stock chassis. It has an 8" deep by 9-1/2" long sump and a 6 qt...
