This pan is for GM LS1/LS6 powered cars that need a rear sump drag race oil pan and owners of 98+ F-Body chassis looking to install a GM LS1/LS6 engine in their car.
| Baffled | Yes |
| Capacity | 6 Quart System Capacity |
| Crank Scraper Included | No |
| Dipstick Port | No |
| Drain Plug Included | Yes |
| Engine | For GM LS Blocks |
| Feature 1 | Double Trap Door Baffle For Oil Control |
| Feature 2 | Bolt On Windage / Anti-Slosh Baffle For Oil Control |
| Feature 3 | 20mm Port for GM Low Oil Warning Sender |
| Feature 4 | Magnetic Drain Plug |
| Feature 5 | Can Be Used With OEM Windage Tray #12558253 |
| Feature 6 | To Use With Canton #22-405 20mm Plug If Not Using Oil Sender Port |
| Feature 7 | To Use With Canton Filter Adapter or Filter Mount |
| Finish | Silver Plating |
| Gasket or Seal Included | No |
| Hardware Included | No |
| Kicked Out | No |
| Material | 16 Gauge Steel |
| Pickup Included | No |
| Recommended Accessory 1 | 21-870 - LS flywheel cover |
| Recommended Accessory 2 | 22-302 - GM LS Oil Pan Stud Kit |
| Recommended Accessory 3 | 22-630 - LS1 Remote Filter Adapter |
| Recommended Accessory 4 | 22-632 - LS1 90 Degree Remote Filter Adapter |
| Recommended Accessory 5 | 22-631 - LS1 Pan Mounted Spin-on Filter Mount |
| Recommended Accessory 6 | 22-620 - Billet Aluminum Spin-on Filter Adapter |
| Recommended Accessory 7 | 22-405 - 20mm Plug(needed if Not using low oil sender |
| Recommended Accessory 8 | 20-850 - Universal Dipstick Kit 1/4" N.P.T. Fitting |
| Recommended Accessory 9 | 21-870 - Aluminum Flywheel Cover |
| Stoke | 3.62 inches |
| Windage Tray Included | No |
Canton
This bracket drag race oil pan is for Small Block Chevy pre-?80 blocks with left side dipstick and is designed to fit most stock chassis. It has an 8" deep by 9-1/2" long sump and a 6 qt. system...
Canton
This Ford 429-460 drag race flat bottom Pro Power pan is designed for chassis without x-members or steering links under the engine. It is 7-1/2" Deep in front and 8" Deep in the rear and holds 8 qts...
Canton
This BBC bracket drag oil pan is for Mark 5 / Gen. 6 blocks. It has a 9" deep by 9-1/2" long sump and a 7 qt. system capacity. Takes up to a 4.25 stroke with a steel rod. This pan requires our 20-190...
Canton
This Small Block Chevy "T" sump drag race oil pan is for pre-?80 blocks with a left side dipstick. It has a 7-1/2" deep, 9-1/2" long by 10-1/2" wide sump and an 7 qt system capacity. This pan...
Canton
This drag race oil pan is for BBC Mark 4 blocks. It has an 8" deep by 10" long and 11-3/4" wide sump and an 8qt. system capacity. Takes up to a 4.5" stroke with a steel rod. This pan requires our...
