This Fox body drag race pro-style power pan is for 351W with 2 or 4 bolt rear main caps & 164 or 157 tooth flywheel applications. It has a 9" deep rear sump and a 7 qt. system capacity. Designed to work with our one-way screen windage trays, which mount directly to the main caps studs. The large oil recovery pouch requires the right side mounting bolts to be accessed through plugs in the bottom of the pan. Works with long tube headers & late model stock starter.
| Baffled | Yes |
| Capacity | 7 Quart System Capacity |
| Crank Scraper Included | No |
| Dipstick Port | Yes |
| Drain Plug Included | Yes |
| Engine | For Ford 351W Blocks |
| Feature 1 | Pro-Style Oil Recovery Pouch Extends Right Side of Pan Away From Crankshaft |
| Feature 2 | Recovery Pouch Thins Out Atmosphere of Oil in Crankcase and Frees up Horsepower |
| Feature 3 | Slosh Baffle For Oil Control |
| Feature 4 | Provision for Canton Pan Mounted Dipstick |
| Feature 5 | Magnetic Drain Plug |
| Finish | Silver Plating |
| Gasket or Seal Included | No |
| Hardware Included | No |
| Kicked Out | No |
| Material | 16 Gauge Steel |
| Pickup Included | No |
| Recommended Accessory 1 | 15-671 - 3/4" Dia. Pickup for use With or Without Canton Main Support |
| Recommended Accessory 2 | 15-673 - 7/8" Dia. Pickup for Engines Without Main Support |
| Recommended Accessory 3 | 15-675 - Pickup for Other Steel Main Support |
| Recommended Accessory 4 | 20-953 - Oil Pump Pickup Stud for 351W Based Engines |
| Recommended Accessory 5 | 20-850 - Universal Dipstick Kit 1/4? N.P.T. Fitting |
| Recommended Accessory 6 | 20-854 - Universal Steel Braided Dipstick Kit 1/4? N.P.T. Fitting |
| Recommended Accessory 7 | 88-650 - Small Block Ford 351W Four Piece Oil Pan Gasket |
| Stoke | 4.0 inches |
| Sump Depth | 9 inches |
| Sump Width | 10.5 inches |
| Windage Tray Included | No |
Canton
This Fox Body drag race pro-style power pan is for Ford 289-302 blocks. It has a 9" deep by 7" long by 11" wide rear sump and a 7 qt. system capacity. The front sump is 6-1/2" deep. The large oil...
Canton
This Small Block Chevy "T" sump drag race oil pan is for pre-?80 blocks with a left side dipstick. It has a 8-1/2" deep, 9-1/2" long by 10-1/2" wide sump and an 8 qt system capacity. Clears a 3.875"...
Canton
This Drag Race Oil Pan is for pre-?85 Small Block Chevys with left side dipstick. It has an 8" deep by 9-1/2" long by 10-1/2" wide sump and a 7 qt. system capacity. Works with an aftermarket starter...
Canton
This bracket drag race oil pan is for Small Block Chevy pre-?80 blocks with left side dipstick and is designed to fit most stock chassis. It has an 8" deep by 9-1/2" long sump and a 6 qt. system...
Canton
This pan is for GM LS1/LS6 powered cars that need a rear sump drag race oil pan and owners of 98+ F-Body chassis looking to install a GM LS1/LS6 engine in their car.BRAND: CantonFEATURES:Canton...
